Is it possible to make an if statement in a cell that only adds the cells in a collum if they are not struck through.
I use this for when an order is complete and would like my total at the bottom of the column to change when I strike out an order in the list.
the attachment is a sample spreadsheet of what i am trying to do. I would like to create a pivot table so that for each site I can list all of the organic suites individually. Then show a count of only 1 for each site, even when there are several counts for each site. And then for this to be related to a cost of each of the suites so that I can get a total cost for each site.
eg:
site name
organic suites suite cost
o1 x
o2 y
o3 z
Total A
etc
I have a formula which I have copied from one of your good selves and tried to adapt it. The formula is below. I a am getting #NA as my answer.
=SUMPRODUCT(ISNUMBER(FIND({"h","H"},B11:G11))*{0.5,1})
I have a person name in Colomn A and then 1 week B-G on a row and want to count number of days holiday.
I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.
My query is this
WEB
1
http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12
Selection=15
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
I'm trying to query a query in Access 2003, from Excel 2003.
The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]
The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]
I use the following VBA code in Excel to excecute the query:
With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
Destination:=ThisWorkbook.Worksheets(cDataSheetName).Range("A1"), Sql:=strQuery)
.RowNumbers = True
.Refresh BackgroundQuery:=False
iResultRowCount = .ResultRange.Rows.Count
End With
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.
I created an Ms Excel Database Query to bring in data from MS Access. (versions 2002 of MS Excel and Ms Access). The query works fine initially. I can right click, choose Edit Query and change my criteria. Results are returned almost instantly.
My problem is that, once I save the workbook, or autosave happens, I get an error when I right-click to Edit Query: This query cannot be edited by the Query Wizard..
Is it possible to set parameters on a query but use a wildcard to return all instances? I have a query that I want to be able to set multiple parameters on but give the user the ability to select as many or as few parameters as they want to see. 2 of the parameters are number fields and 2 are text fields with no spaces.
View 4 Replies View Relatedsee my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
View 2 Replies View RelatedI need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View Relatedi import a table from the internet through web query and i reformat the cells to suit my liking, but when i refresh the data the cell formatting goes back to how it started. how do i make it so it always keeps that same cell formatting?
View 11 Replies View RelatedIs it possible to open microsoft query without opening Excel or Query Wizerd.
View 3 Replies View RelatedIs it possible to use the Web Query function in Excel on a PDF file?
View 2 Replies View RelatedColumn A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies View RelatedI am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.
I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.
I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.
The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies View RelatedVBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.
View 7 Replies View RelatedI require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....
It looks something like this.....
Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A
Is there anyway to do this without subtotalling for each document and then a count?
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View 2 Replies View RelatedI'm trying to build a query which matches two tables which say has a number like A#### , I want the query to give me the A number's which do not belong in the second table but which do in the first table. i believe i need an SQL query to do this?
View 2 Replies View RelatedI have a spreadsheet which we use to rank scores for our golf society.
At the start of our season it was decided that if anyone of the top 3 scores were tied we would separate them using a second criteria(back nine score). Any scores from position 4 down would still be tied.
From searching this forum i have managed to separate ties using the 'back nine' second criteria(using a hidden helper column) but only for all the ranking positions not just the top 3.
I have attached the file.
how I would be able to weed out and remove previous references to query names.
For example if I have an external data query named "qry1 by week", then remove the query, then create another one, how do I use the same query name again? Surely there's a reference to it somewhere, that I can eliminate?
Here it goes.
My spreadsheet is populated by data coming from MS Query, i'm entering a parameter value to display the desired data in my spreadsheet. My problem is, i have to close and open the file to have the parameter prompt so in that case i can enter the parameter value.
Is there anyway to call the parameter prompt so i will not open and close the file, its really time consuming...
If possible, i just want a command button that calls the parameter prompt.
I am having problems getting to work a web query in a VBA macro. The goal is simply to get a value retrieved from a web query into an excel cell.
The below code works well with standard html pages (like replacing the url with www.google.com). However, the page I want to retreive (a query at geonames.org that retreives an altitude value for given lattitude/longitude values) does not contain any HTML headers, but just a number in plain text. In this case the below query does not returns anything. I tried different formating options for the query but up to nownothing works.