VBA To Count Data In Column And Paste The Count In Different Sheet?

Jul 1, 2014

VBA which would count data in Column F of dump Sheet and paste the count in master sheet B2 Cell.

View 7 Replies


ADVERTISEMENT

Macro To Copy And Paste Data Column Wise From One Sheet To Another After Row Count

Mar 24, 2014

in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.

Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.

View 4 Replies View Related

Count Rows On Multiple Sheets - Paste Values In Summary Sheet

Jun 30, 2014

I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.

Here is what I have so far:

Code:
Sub SummaryCalculations()
Dim lr As Long
Dim i As Long
Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2

For Each ws In SheetArray

[Code] ...........

View 8 Replies View Related

Formula To Omit "vs": Count All The Cells With Data In Sheet 1 Column

Mar 7, 2009

im trying to count all the cells with data in sheet 1 column g but it must omit any cells that have "vs" in it. all cells have scores in like 1-1 2-2 2-1 etc but a few have vs in them and i dont want them counted

View 5 Replies View Related

Count Formula: Count Cells In Column That Are Graeter Than 160

Feb 5, 2010

I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.

View 4 Replies View Related

Count If Formula: Populate That Count Below The Column Indicated Therein

May 19, 2009

I have a file where I want to count number of cells where the value is greater than 0. in the attachment, i just want to populate that count below the column indicated therein. So in the example, desired result is two.

View 4 Replies View Related

Macro To Count Column Use Count In Adjacent Column

Nov 23, 2011

Is there a way to do this without using a macro, but I need it to be in a macro.

Column A has a value I am calling a label, ex. ABCDEF which occurs over and over. Column B has a list of animals, many of which repeat AND will be together if they do repeat. In other words, all rows in Column B with Cows are together, occurring in consecutive rows. I need a macro that will look at each row in column C and increment +1 starting at 0. That will be concatenated with the value in Column A and pasted as a value in column C.

See the linked spreadsheet tabs for Before Macro and how it should look After Macro is run.

[URL] ........

View 1 Replies View Related

How To Count A Column If It Matches Data From Another Column In Seperate Rows

Feb 6, 2009

I have two columns with dates. Colum A has the date of the deadline of a document while column b has the day it was sent. Column X will display the difference if its a positive integer ( i.e. if the document has been sent after the deadline). Now i have another column Y which displays the month as an integer of when the document was actually received.

Now i need a counter which will count the number of instances a positive integer is registered in column X according to the month in column Y. I have been trying everything but cant figure a simple way to do it. Im doing this so i can be able to see how many documents are sent after the deadline per month.

View 14 Replies View Related

Count How Many Cells Have Data In One Column If Within Date Range In Another Column?

Jan 22, 2014

I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.

So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).

A
B
C
D
E
01/01/2014

[Code].....

View 4 Replies View Related

Transferring Data From One Sheet To Another Just By Adding Count?

Jan 30, 2014

Looking for the formula needed to transfer data from one tab to another just by adding a meal count. On the attached file for example:

When I add a meal count in D1 on the Fry Prep Board I would like column B to populate with the associated columns from the Fry Pars.

I just need the formula for one cell and I should be able to complete the rest, I believe it would be a VLOOKUP formula?

View 3 Replies View Related

VBA To Count Cell Value And Paste Cell Value And Number In Another Sheet

Jun 16, 2014

Sheet("Dump1") has a series of data in duplicates in column E.

E.g. Pending Client
Pending Client
Pending Third Party
Pending Employee
Pending Third Party
Pending Client
And any other dynamic Comments.

I am trying a VBA which would count the serious of occurrences and paste the value with its name in Sheet("Status") Column A13 and below.

Like.
Pending Client 3
Pending Third Party 2
Pending Social 1 ( If it founds in data )

I cannot use the formula here to count, because I am not sure what all pending status will be there at given point of query.

View 4 Replies View Related

How Can I Count How Many Unique Data Has My Column

Feb 14, 2009

I have a column on sheet with has some data. I want to know: How many unique data has my column. If I use auto filter I can count it in list. But how can I do it with macros? I dont want to make a cycle because it will takes me a lot of time..

View 9 Replies View Related

Count Data In Column X Based On Conditions In Column Y

May 6, 2009

I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".

In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.

View 3 Replies View Related

Automatically Have Column Count If Two Other Cells Have Specific Data?

Apr 28, 2014

Is it possible to have a column count up if two other cells meet criteria?

What I would like to happen (if it is even possible) is, if cell B1 equals CO and C1 is a duplicate, then G1 enters #1 for the first time it is duplicated, #2 for the 2nd time it is duplicated, etc.

Is this even capable of happening.

I am attaching my spreadsheet (TAB "AG Orders"). I filtered the spreadsheet so you can see an example of what I am looking for. I manually typed in column G but I was hoping these numbers could automatically populate.13-14 budget-AG test.xlsm

View 9 Replies View Related

Pull Data From Two Sheet And Paste Into Master Sheet With Desired Column Only

Aug 28, 2013

I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet

e.g i pull data from two sheet(ONSITE&CCI)

SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT

View 1 Replies View Related

Pivot Table - Displaying Count Of Data In A Column With Y/N Answers

Dec 16, 2013

I am new to Pivot Tables and I am having difficulty displaying a count of data in a column with Y/N answers.

Previously I would have undertaken this using the SumProduct function in a standard table.

I attach an example workbook with my data, what I want it to look like and the pivot I have created.

Book1.xlsx‎

View 4 Replies View Related

Count Unique Values Based On Duplicate Status In Another Column On Filtered Data

Mar 5, 2014

I am able to quite easily count the number of specific values in a cell after the table has been filtered. However, the problem I have run into is that some times the data needs to be placed into the spreadsheet twice (or to be more specific the same subject is associated with several unique data points).

What I need: some way to count the instance of some give value in column D only once based on the presence of a duplicate (unique) identifier in column C. However, when I filter the entire database, it must count *only* the filtered cells and not the hidden cells as well.

Picture:
Column C Column D
111111 M
111111 M
111111 M

[Code]....

Currently calculates: M=9, F=2

Right now it incorrectly states there are 9 "M" from column D when it really should be 5 since 3 are duplicate values. My main difficulty is making sure this continues to work after I filter the entire sheet (say column ZZ) and have a bunch of hidden cells.

Equation currently using to count only filtered values (in this case "males" and "females"):
="M = " & SUMPRODUCT(SUBTOTAL(3,OFFSET(D3:D13,ROW(D3:D13)-MIN(ROW(D3:D13)),,1))*(D3:D13="M"))

View 9 Replies View Related

Paste Data From One Sheet To Another Sheet In Same Column

Dec 12, 2008

Can someone help me with this script? What I want to do is paste the next sheets data into the next empty space in (A) of the last sheet. The script works for the first paste but after that it just over pastes the next sheets data on top of what was already pasted.

View 8 Replies View Related

IF Statement Within A COUNTIF Statement: Cell In Sheet "Summary" Count The Number Of Cells In Column DX Of Sheet "Analyses" That Are Greater Than 0

Apr 22, 2009

I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."

(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:

=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")

(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.

View 5 Replies View Related

Macro To Paste Values Until Count Reached?

Sep 17, 2012

On Sheet1, I have a list of names in Column A, with a corresponding value in Column B

NAME
VALUE

Alpha
3

Beta
2

Gamma
1

Delta
2

On Sheet2, I have a list of items that need to be assigned based on the values on Sheet1 (Assign to column would be blank, filled in by the macro/formula)

ITEM
ASSIGN TO

1
Alpha

2
Alpha

3
Alpha

4
Beta

[code]....

best way to automate the data on Sheet2? The items can be assigned in any order, it just needs to match the count on Sheet1.

View 4 Replies View Related

Conditional Sum & Count: Count Request Matching The Crateria Of Date And Other Conditions

Nov 17, 2007

see my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.

View 2 Replies View Related

Count Number Of Equal Cells With A Prefix In Col D And Insert Count In Col A?

Aug 7, 2013

I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.

Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.

Examples of the contents of cells in col D with the "Category:" prefix are as follows:

Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices

Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.

I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.

View 9 Replies View Related

Formula That Adds Count But Saves Count So Can Clear Field

Jan 20, 2008

I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.

But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.

E.g

Large Parts Current Stock = 50

(enter in) Large Parts Used = 2

Large Parts Current Stock = 48

(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)

View 9 Replies View Related

Count If Formula: Count The Number Of Nhew Stores Each Quarter

Aug 21, 2006

going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....

View 6 Replies View Related

Count If / Compare 2 Ranges And Count Where Cells In Same Row Differ

Apr 15, 2014

Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.

View 3 Replies View Related

Count Formula (count Everything Excluding 1 In One Row, While Looking At Another Row To Determine The Group)

Mar 26, 2009

I am trying to come up with a formula that will count everything excluding 1 in one row, while looking at another row to determine the group.
The attached example explains things a lot better.

I am going to have 2 formulas. 1 for the "Big" group and one for the "Small" The formula needs to look first at the column that has the group in it. Then it needs to count everything is column A excluding "Snake" And return the value.

View 2 Replies View Related

Count Function To Count From A Set Point On Recurring Basis

Jun 22, 2009

I want to count from each cell that doesn't contain "0". So if cell C2=100, I want to be able to count the number g1*2 from that cell and return a value. But then I want to start another count from c5 to the number of g1*2 and then another count from c8 etc basically any cell that contains a value other than "0", I want to start a count from.

The point of this is that the half life will expire after that count, so I want to be able to add the drug levels on an ongoing basis until the count of the half life has been reached. But there will be further dosing along the way before this half life is reached and these values need to be added to the existing value until the half life expires.

View 2 Replies View Related

Count Intervals Of 2 Numeric Values In Same Row And Return Count Across Row

Sep 23, 2005

I require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.

For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.

The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?

Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80

Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83

View 12 Replies View Related

Loop To Count Cells Until Criteria Met Then Restart Count

Mar 7, 2012

ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NO 33/5/2012NO NO 43/4/2012NO NO 53/3/2012 YES2NO 63/2/2012NO NO 7 3/1/2012 YES1YES682/29/2012 YES0NO 92/28/2012NO NO 102/27/2012 YES1NO 112/26/2012 YES0NO 122/25/2012NO YES4

I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.

View 5 Replies View Related

Formula For Multiple Count - Without Subtotalling For Each Document And Then A Count

Oct 19, 2009

I have a transactional data set with a line for each transaction and I am looking to count the number of documents (each contains multiple transactions) against criteria.....

It looks something like this.....

Column A Column B
Document No Category
11000001 A
11000002 B
11000003 B
11000002 A
11000001 A

Is there anyway to do this without subtotalling for each document and then a count?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved