# Counting Number Of Cells In Column That Are Not Blank

Mar 21, 2012I want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".

View 9 RepliesI want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".

View 9 RepliesADVERTISEMENT

I am attempting to count a number of cells in one column so long as they fall within a certain date, which is located in another cell in the same column. I'm trying to account for a number of reports that happened within a certain week.

The formula I came up with was

=COUNTA(COUNTIFS(A_DATE,">="&B2,A_DATE,"<="&D2))

But this returns 1 more then it should no matter what. Even when all cells within A_DATE are empty. it returns 1.

I know the COUNTIFS portion works to count the cells between certain dates.

Is what i'm looking to do possible or am I suffering from Excel burnout and just can't see that logicaly it makes no sense?

I am sure this should be REALLY simple, but i just can't find the answer i'm looking for. I have a sheet which changes daily in quantity of information. I want some simple code which counts up the number of populated cells in column A and returns the answer to a cell in another worksheet - or just automatically use it to print that number of pages.

I think i should be able to do the printing side, but, currently have no idea how to count up the number of populated cells in the row. If someones feeling very generous though, giving me the code for printing that number of pages too would save me some work (the worksheet which needs printing is different to the worksheet which needs the number of cells adding up.)

A column (A1:A60) is being progressively filled in with numbers, and occasionally some blank cells are between.

I need a formula to work out the number of the remaining cells (that are yet to be filled in) from the last entry till the last cell (A60) of the column.

I have this formula which is counting the number of cells in a column that fall within each calender month.

However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.

In my workbook, B/C:133 have a formula =""

I will need the formula in column E to work if there is a formula that yields a "" in column B and C.

I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.

View 2 Replies View RelatedI have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.

The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.

If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.

I have attached a spreadsheet with some tele numbers. What i need to do is to find out which column only has 1 telephone number, eg. only a cellphone number, etc. I have aboout 50 000 records that i need to check if only 1 telephone number is available. Can i use the countblank function?

View 2 Replies View RelatedI am trying to write a formula for the following can anyone help please?

I have column D with blank cells and some with purchase order numbers in them. I want to count the blank cells in column D but only if the blank is 3days older than the date recorded in column A. Once I have done this I want to count ther same on every work sheet and I have 24 off them and get one answer.

This will tell us all the outstanding purchase order older than 3days

I have a Colom with dates, some cell are coloured and others not, some of the non-coloured cells have dates and some not. I would like to count ONLY the non-coloured cells without dates in them.

View 6 Replies View RelatedI am trying to put together a table from which I'll attach a chart showing-at a glance-where open complaints are in our process:

are they open, closed, waiting for samples, waiting for QC, QC'd pending admin approval, etc.

my log consists of a lot of columns which track various pertinant info about each complaint. Such as A-complaint ID, B-date opened, C-date closed, K-initial QC investigation, L-final QC, M-admin status (pending/approved/denighed), N-notes (boiler plate notes like "pending ra samples" or "closed").

I used this formula alot in my various analyses =SUMPRODUCT(--(YEAR(Log!open)=$O74),--('ComplaintLog (101408).xls'!iqc="pending")) without issue.

Until now. I want to search multiple criteria starting with the year (2009, in this case) and whether or not the issue is closed (date in column C). Only need a count.

How do I append the sumproduct formula? I've looked at isblank but get crazy results from #value to #name to 340 (I only have 292).

PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca

Tab1

PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca

Tab 2

I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.

=IF('tab1'!E2="","",'tab2'!E2)

I have a spreadsheet that is used to capture information about Service Requests that my team handles in a 6 month period. At the end of January, the metrics for January will be added and the metrics for July will "fall off".

I need to be able to calculate the number of requests that were still active for each month. The formula I have created for this is below:

=COUNTIFS(Table1[Date Submitted],"Month Beginning of the First Month Being Reported", Table1[Date Closed], ">A Day Before Current Month Closing")

So, if my reporting period was July 2012 to December 2012, my formula for December would look like:

=COUNTIFS(Table1[Date Submitted],"7/1/2012", Table1[Date Closed], ">1/6/2013")

This accounts for anything that was opened in the months that was not closed before the month closing of the current month being reported.

I have two issues that I'm having with this formula:

1. The formula does not take into account the Service Requests that do not have a date in the "Date Closed" columns. Is there a way I can also count the items that have a blank "Date Closed"?

2. This formula will have to be changed every time a month "falls off". For example, when the reporting period changes from July to December to August to January, the formula for December will change to:

=COUNTIFS(Table1[Date Submitted],"8/5/2012", Table1[Date Closed], ">1/6/2013")

Is there a way I can have it change automatically without me having to do it manually?

I'm trying to to create a formula where if two different cells have no value (K10 & O10) a third cell will also be blank (N10)

I have the following formula which follows these steps when i evaluate it.

=VLOOKUP(K10&O10,$J$77:$K$98,2,0)

=VLOOKUP(" "&O10,$J$77:$K$98,2,0)

=VLOOKUP(" "&" ",$J$77:$K$98,2,0)

=VLOOKUP(" "$J$77:$K$98,2,0)

#N/A

How can i deliver a blank cell as the answer?

see attached doc. The graph is showing the overall % from the table above. However months april-december are blank although they have a formula in them. This is causing the graph to show thes months as 0%.

View 2 Replies View RelatedI have a simple date formula that I want to present "yes" in a cell when another cells date is less then or equal to "Today". I just can't figure out how to make it show my result cell as blank if my date cell is blank?

here is my formula....

=IF(G8 <= TODAY(), "YES", "")

Using formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.

The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?

I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.

Code:

=COUNTA(Mem!$M:M)

The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6

why it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.

View 6 Replies View RelatedThe below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.

I'm not sure how to say leave the result blank if the column index number is blank.

Excel 2010

Userform = Tab 1

Database = Tab 2

I have the following table

Team>

Team A

Team A

[Code].....

I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere

April

May

Team A

6

1

Team B

11

1

I have the following formula which counts number of days between dates in two adjacent cells excluding holidays

=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1

The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.

I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1

However if no date is in both fields it count -1 (minus one)

If a date is just in one field it counts a very high number, example below.

-1

16/07/2014

-29879

20/06/2014

08/07/2014

12

[code].....

is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?

I know this question may have been posted before, but I can not seem to get this to work with my formula. I have a formula to count the values of a column so that I can convert it to a graph. I am giving a value of 1 to cells that contain numbers between 0 and 9.5 and giving a value of 0 to cells that contain numbers greater than 9.5. It works fine except that I have some blank cells that I do not want to get rid of and it is counting those as zeros and giving them a value of one. I want to ignore the blank cells or give them a value of zero.

=IF(AND(F2>=0,F2

how can I count the number of not empty rows(and for example too many) using do.. until loop kind. I am searching on the net for about 24 hours but I couldn't find it.

View 5 Replies View RelatedMy data is as follows:

Month 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Number of Starts 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Rolling Number of Cases 10 20 30 40 50 60 70 80 90 100 110 120 120 120 120 120 120

In my dataset above the cases finish after 12 months (hence why there is a maximum number of cases).

What I am seeking is a method to count along a certain number of cells, then sum the contents of those. For example, I would like to count the contents of up to 12 cells, then sum those 12 cells.

Where it gets difficult is as follows:

- In month 6, I am just counting the contents of 6 cells (months 1-6)

- In month 12, I am counting the contents of 12 cells (months 1 -12)

- In month 18, I am counting the contents of 12 cells (month 7 - 18)

I have this data lets say id denotes a particular house and the multiple entries of the same house are for different members of a house. Now i want to calculate the total no of people who earn in a particular household i.e if a cell is filled or not.

idB C

00118000040000

001

001

001

002170000

[code].....

I am trying to count the number of unique items in a single column (~5,000 rows of data). For example, I may have the following data

a1 = apples

a2 = pears

a3 = oranges

a4 = apples

a5 = apples

a6 = apples

a7 = pears

in this case number of uniques items is 3

Right now I am using a Pivot Table to figure out the number of unique items but I am sure there is an easier way to do this.

I'd like to count the number of occurrences a value appears in a column. Hard to explain what I'm after so I will draw it out:

Column A

2512

2512

2513

2513

2513

2513

2518

2519

2519

2519

I want to add a formula in column b that will add the number of times it appears as it appears:

ColA ColB

2512 1

2512 2

2513 1

2513 2

2513 3

2513 4

2518 1

2519 1

2519 2

2519 3

Is there any way i can display the columb number without actually manually counting across.The columbs are A to Z,AA to AZ,BA to BZ,CA to CZ & DA to DN....about 120 columbs.Is there a way to have the columb number diplayed by just placing the mouse cursor on the columb letter (not press though as it will select the whole columb..going to use for VLookup function

View 3 Replies View RelatedI need to count all the cells in columns H, I, and J that contain a number either less than -.5 or greater than .5.

Separately, I also need to count all the cells in columns H, I, and J that contain a number either less than -.5 or greater than .5 if the corresponding cell in column G is not empty.

Copyrights 2005-15 www.BigResource.com, All rights reserved