Counting Number Of Cells Which Are Green
Apr 12, 2013
I have a column that shows green when a target has been reached.
On a separate sheet, in the same workbook I have the number of days which target has been reached in the month. At present I have to update this manually, is there a way to automate this?
View 1 Replies
ADVERTISEMENT
Mar 24, 2014
My data is as follows:
Month 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Number of Starts 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Rolling Number of Cases 10 20 30 40 50 60 70 80 90 100 110 120 120 120 120 120 120
In my dataset above the cases finish after 12 months (hence why there is a maximum number of cases).
What I am seeking is a method to count along a certain number of cells, then sum the contents of those. For example, I would like to count the contents of up to 12 cells, then sum those 12 cells.
Where it gets difficult is as follows:
- In month 6, I am just counting the contents of 6 cells (months 1-6)
- In month 12, I am counting the contents of 12 cells (months 1 -12)
- In month 18, I am counting the contents of 12 cells (month 7 - 18)
View 5 Replies
View Related
May 9, 2012
I need to count all the cells in columns H, I, and J that contain a number either less than -.5 or greater than .5.
Separately, I also need to count all the cells in columns H, I, and J that contain a number either less than -.5 or greater than .5 if the corresponding cell in column G is not empty.
View 1 Replies
View Related
Jan 5, 2007
I need to know wich formula or VB method, I have to use to count the number of cases in a range of colomns and rows C4:G107, have the same number. For eaxample how many times do I have number 1 and so on...
View 9 Replies
View Related
Mar 18, 2009
I like to think that I am pretty good on Excel 2003, can't stand 2007 but hey thats for another thread.
I can do most forumulas and write some pretty elaborate macros, but one thing I am trying to do has completely stumped me.
Each month I compile a Pivit table that shows by day if a product was in stock or out of stock, this is represented by a blank cell (in stock), "1" Out of stock.
All this is fine, but I want to be able to show the number of instances that a product was out of stock in any given month...
View 8 Replies
View Related
Mar 21, 2012
I want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".
View 9 Replies
View Related
May 21, 2013
I have a Workbook with multiple sheets with Data in them. I would like to Count the number of duplicate values between the sheets.
For example.
Sheet one has a list of case references Person A is dealing with.
Sheet two has a another list of case references Person B is dealing with however the also have a list of case reference's they are monitoring as part of a project.
Sheet 3 has got the total number of case references each Person is dealing with, it also contain the total number of cases Person A&B together are dealing with. however i need to find the total number of cases Person B is monitoring that Person A also has so that the total number of cases is the true number of total cases with no duplicates involved.
(References begin with VB then have a string of numbers afterwards and I would like to know the total number of cases the Person B is monitoring as well so these need ot be calculated).
View 7 Replies
View Related
Dec 24, 2013
Have been doing some sums on excel. I've managed to calculate the number of months between 2 dates using this formula.....
=DATEDIF(C3,D3,"y")&" years "&DATEDIF(C3,D3,"ym")&" months "
I then come up with a list of months calculated.
What I now want to know is, how many are equal to or more than 9 months? And if this is the case then can the cells be highlighted in a different colour?
View 2 Replies
View Related
Dec 11, 2012
I am attempting to count a number of cells in one column so long as they fall within a certain date, which is located in another cell in the same column. I'm trying to account for a number of reports that happened within a certain week.
The formula I came up with was
=COUNTA(COUNTIFS(A_DATE,">="&B2,A_DATE,"<="&D2))
But this returns 1 more then it should no matter what. Even when all cells within A_DATE are empty. it returns 1.
I know the COUNTIFS portion works to count the cells between certain dates.
Is what i'm looking to do possible or am I suffering from Excel burnout and just can't see that logicaly it makes no sense?
View 2 Replies
View Related
Aug 7, 2009
I am sure this should be REALLY simple, but i just can't find the answer i'm looking for. I have a sheet which changes daily in quantity of information. I want some simple code which counts up the number of populated cells in column A and returns the answer to a cell in another worksheet - or just automatically use it to print that number of pages.
I think i should be able to do the printing side, but, currently have no idea how to count up the number of populated cells in the row. If someones feeling very generous though, giving me the code for printing that number of pages too would save me some work (the worksheet which needs printing is different to the worksheet which needs the number of cells adding up.)
View 2 Replies
View Related
Aug 15, 2009
A column (A1:A60) is being progressively filled in with numbers, and occasionally some blank cells are between.
I need a formula to work out the number of the remaining cells (that are yet to be filled in) from the last entry till the last cell (A60) of the column.
View 7 Replies
View Related
Aug 13, 2012
I have an excel sheet which is currently 1,100 lines long and expected to increase and has a number of dates in columns W-AO representing the dates in which someone has had an onsite assessment. I wish to report in column AQ if there has been any visit activity in the month, i.e August for this month’s report. Is there an Excel function which will allow for this? Im thinking something like having a drop down list to select the month at the top of the column and then the sheet returns a value of 1 for all lines where a there is a date equal to the month selected?
I guess it is also worth mentioning that the sheet is setup as a table.
View 8 Replies
View Related
Dec 18, 2009
Look within sheet "highlowperf" column K and copy the row containing cells that are filled green in column K into sheet "overallperfomers" starting from row 9 within the "overallperformers" sheet until completed. It needs to be from row 9 as i have other data above this which i need to keep intact.
Further to this i do not require all information from the row that is found to contain a green fill. I wish to copy columns A B C D E F G K.
If this second part is not possible I can settle to just copy the whole row over and i will try and work around.
View 6 Replies
View Related
Apr 24, 2013
I need to sum the cells that are light green in color. The color is manually added. I guess I need a macro for this. I have never done a macro so be very specific.
View 5 Replies
View Related
Jan 14, 2014
I'm looking for the easiest way to count the number of occurrences within a cell range.
The formula that I'm currently using is:
=COUNTIF(D$5:D$8,"a*")
This counts the number of cells that start with 'a' and returns the sum. It seems to work fine, but when I try to make it look for more values in the range it gives me an error. For example;
When I want to find multiple values in the range and count them all, I use this formula:
=COUNTIF(D$5:D$8,OR("a*","b*","c*"))
View 9 Replies
View Related
Aug 18, 2009
I'm trying to count the number of non-empty cells beneath a reference cell and would be most grateful for a few pointers. The code I currently have (that doesn't work) is:
View 2 Replies
View Related
Jan 27, 2010
I have attached a small file with a very simple conditional formatting formula used to turn a block of cells green.
However, the formula does not seem to work properly as it only turns half of the cells green. Columns B1 to B18 are also supposed to turn green, but instead remain clear.
View 11 Replies
View Related
Nov 26, 2012
I am searching for the best way to loop thru col A and highlite cells with a fill color of green. I then wish to copy and paste these cells to another WS.
View 5 Replies
View Related
Apr 7, 2014
Excel 2002
I have a simple spreadsheet and am trying to get some Conditional Formatting to work.
Cell1 = Name
Cell2 = 1
Cell3 = 2
Cell4 = 3
If cells 2, 3, and 4 all match I want the background in cell 1 to change to green.
I've tried (Formula Is =B1=C1=D1 green) with no luck.
View 5 Replies
View Related
Dec 27, 2012
I have a spreadsheet with sales which I colour green when they are outstanding and red when they are despatched. I would like to automatically add a 1 in an adjoining column when the cell is green (eg outstanding) or zero when they are despatched so that it totals up the number of outstanding orders.
a b
172.95 (this column would be green)
024.00 (this cell would be red)
124.00 (this cell would be green)
132.25 (this cell would be green)
View 3 Replies
View Related
Dec 10, 2008
can I set a cell in excel so that if a number in a different cell is above a certain number it will turn green and another cell to turn red. I have attached the file.
View 4 Replies
View Related
Nov 22, 2007
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies
View Related
Jul 10, 2014
I have a spreadsheet for tracking jobs. Most everything is based off of week # rather than date. I am trying to get the stats page of the workbook to tally the total number of late jobs per week.The current week is taken care of because there is a function that automatically displays on time yes or no and I just set it to count the yeses or nos.The problem I am having is for past weeks.
I tried- =COUNTIF(Table2[On-time],"No"+(CountIF(Table2[Week # Hidden],"<Weeknum(Now())" but that doesn't work. I also tried isolating the < like this. =COUNTIF(Table2[On-time],"No"+(CountIF(Table2[Week # Hidden],"<"Weeknum(Now()) and that did not work either.
------ UPDATE
In response to using CountIFS I have also tried-
=COUNTIFS(Table2[On-time],"NO",Table2[Due Week '# Hidden],"<Weeknum(Now())") this just returns a zero value even when I have a late job listed three weeks ago.
View 10 Replies
View Related
May 23, 2006
I have a column for EE or SP and a column that has an amount of insurance
coverage like 10,000 etc.
I want to count the total number of EE have that level or type of coverage
My columns are like this:
C1 EE K1 10,000
CE SP K2 200,00
I have tried numerous formulas from the various discussions and I can't find
any that works.
View 11 Replies
View Related
Dec 23, 2006
How do I create a formula that will count the number of times in F7:H106,
where the number "0" occurred and had a value of "1" to occur
in the previous row in the range, if no number "1" in previous row
then ""
examples
if G22=0 and G21=1, then count 1
if G12=0 and G11=1, then count 1 more
View 9 Replies
View Related
Mar 27, 2014
I need a formula, from which I need to drag (if needed) and to fill with numbers, by following principles:
- when the left cell contain the zero, it needs to find on the same column if there exists another zero, or another one and count them, let's say if find three zeros untill find number one, return 3.
- when find a number 1, after another 1, has to return a zero.
- the formula need to initialise from the top of the column, only finds the first number 1.
I have a relevant example down bellow. I used to count them visually and sometimes errors sneak into my spreadsheets.
View 5 Replies
View Related
Aug 14, 2013
I have a table like this.........
Item Code
Ice A
Ice A
Ice B
water D
water A
water C
water A
milk B
milk D
milk C
milk C
milk C
milk B
And I would like to count the number of each letter to look like........
_______ A B C D
Ice ___ 2 1 0 0
water _ 2 0 1 1
milk ___0 2 3 1
View 2 Replies
View Related
Dec 13, 2006
I am trying to calculate the number of months between two given dates.
The spreadsheet is basically about staff and their start and end dates.
For example start dates would be in colum A and end dates would be in column B (in dd/mm/yyyy format).
I am currently using the following formula:
=DATEDIF(A1,B1,"m")
It does return the correct results when the dates are the same e.g. start date = 01/01/2006 and end date = 01/04/2006 = 3 months.
BUT when I change the end date to 31/03/2006, it returns as 2 months.
Is there a way around this? I need a more accurate number of months (with no decimal places)
View 10 Replies
View Related
Sep 21, 2009
If I generate a random number in cell A1 ranging from 1 to 3. Can I count how many times the result is equal to 2 if I was to run it 100 times and then show the results in cell A3.
View 9 Replies
View Related
Apr 1, 2008
I have an excel list with 3 columns (date, comment, cost):
I'm continously adding new entries to the list and want to see the average cost per month without remembering how many different months I already entered.
For this I need the number of months extraced from the date-column so I can devide the cost total by the numer of months.
The date format is dd.mm.yy
View 10 Replies
View Related