Create List Of Tab Names And Automatically Update When New Added
Mar 13, 2013Is there a way to automatically create list of the Tab names, and have it automatically update when new tabs are added?
View 2 Replies
ADVERTISEMENT
Automatically Create New Worksheets Based Upon List Of Names
Aug 10, 2014I have a list of names in column A, and want to automatically create worksheets within this same workbook based on the list.
List of values:
Dairy NI
Dairy SI
Sheep and Beef
Equine
Sports Turf
Water Industry
Horticulture Services
Production Horticulture
Other Agriculture
Therefore, a macro or coding to automatically create 9 spreadsheets named as per this list.... My list is approximately 50+ hence inquiring if there is an easier way!
Chart To Automatically Update When New Data Is Added
Aug 19, 2006I have attached a copy of the chart and data. My chart starts on the bottom. I had to take out a lot of data but beneath the data shown is much more data..
I want my chart to automatically update when new data is added. Here are the issues. I have several lines of headers and below that my data. Then below my data I have other data that I don't want displayed in the chart (its not shown here because of size limitation of attachmnet).
The new row will be added each time right below the header, right above the
most recent data given. So a row will be added above row 8!
How To Automatically Update A Macro To Adjust For Rows Being Added
Mar 5, 2013I have a worksheet used for a car game. Each row is designated to show one particular car that can be used in the game, so let's say that there are 40 cars taking up 40 rows.
Column A shows the car type and model; column B shows the engine that the cars has represented by a number (the higher the number the better the engine is); and so it continues, Column C shows the transmission; column D the brakes etc.
Underneath the 40 rows (lets say from row 45 to 65) I then have a table with spare-parts that can be used to replace the cars existing parts. This Parts-table is also arranged with engines in column B, transmissions in column C, brakes in column D etc...
This point of this layout is that it should be easy to compare each type of part in the spare-parts table with the corresponding type of part already used in any of the cars as everything is perfectly lined up by the columns.
About the spare-parts table: because the inventory in the spare-parts table often are added to or subtracted from, as parts are won in races or being put on the cars, I have created a macro to sort the parts in each column so as to put the best parts at the top of the table and the bad ones towards the bottom - so far so good.
The problem is this - as I add new cars, the table of spare-parts is pushed down worksheet and that means that the macro no longer will reference the right rows. So the question is this, how do I automatically update the macro to adjust for rows being added above it? I am not really interested in redesigning the worksheet.
Auto-Update Validation List When New Entries Added To Source
Mar 18, 2008how to make all cells displaying an item from the list source update with new information added to list source.
Example:
Cell "A1" on worksheet 2 displays the 3rd slot of information from list source on worsheet 5. I want cell "A1" on worksheet 2 to update when the list source information in the 3rd slot on worksheet 5 is changed.
Notes:
The list is set up by naming the columns on Worksheet 5 and is set as a validation list on the other worksheets. So on Worksheet 2 column "A" has the validation
VB:
AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".
List=(Coulumn A 's name on worksheet 5)
Create A List Of Unique Names From A List Of Multiple Names
Oct 21, 2009I have a database output file where one of the columns contains managers names, often more than once. I want to apply an autofilter on manager name and then copy the result to another sheet or sheets. My criteria for the autofilter is a variable pointing to a list of names that at present I maintain by hand; a for-each-next loop then cycles through the names.
What I would like to do, before running the autofilter code, is to create the list of names via code. This would then automatically pickup names that are missing.
The code I have so far is below:
Public Sub find_managers()
Dim managers1 As Range
Dim names1 As Range
Dim n1 As Variant
Dim n2 As Variant
In my mind it should check the names in the unique list against the imported list and add any missing names.
Create Dropdown That Will List All Names Starting With Initial Letter Of Names?
Jan 13, 2014I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.
View 9 Replies View RelatedCan Create Data Validation List Of Names Created In Name Box Or Sheet Tab Names
May 7, 2012Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedRelating List Of Random Numbers To A List Of Names To Create Rota
Nov 21, 2013I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies View RelatedUpdate Automatically, Not Manually Extending The List On The 2nd Sheet
Nov 18, 2008I have a list (external), which will be updated every month from an external source with new numbers and possibly a new size. This will be a count of services people use. On a 2nd sheet I need to allocate a cost to these services (pivotdata). This works fine if the list stays the same size, but it most probably won't so I need it to update automatically, not manually extending the list on the 2nd sheet. In brackets are the named ranges of the data in the spreadsheet.
View 5 Replies View RelatedData Validation List - Automatically Update Cells Where Used
Apr 15, 2011On Sheet2, data validation is applied to cells D21:D70 to limit data to values to a list, which is a named range on another worksheet. There are ranges on two other worksheets with the same data validation rule. The range for the list is ‘Sheet1’!D12:D26 (which is named “Processes”).
On Sheet1, the user enters a list of their processes. Then on Sheet2 (and the other sheets where the data validation is applied), they select one of the processes from the list. This all works fine until they go back to Sheet1 and modify one of the previously entered values.
For example, "Brush Teeth" is entered as one of the processes on Sheet1. It is then selected on Sheet2. Then, the user goes back to Sheet1 and changes the value to "Brush Hair." When you return to Sheet2, the value is still "Brush Teeth." It can be manually be changed by selecting “Brush Hair” from the drop-down list (“Brush Teeth” is no longer available), but it doesn’t automatically update.
Data validation was applied to a single cell (A3) and the list was on the same worksheet (B1:B3).
Option Explicit
Private oldValue As String
Private Const DVCell As String = "A1"
Private Const dataList As String = "B1:B10"
[Code]...
'This is worksheet event code, which means that it needs to be 'placed in the appropriate worksheet code module, not a standard 'code module. To do this, right-click on the sheet tab, select 'the View Code option from the menu, and paste the code in.
On Sheet2 (I assume I need to add this code to every applicable sheet), I tried editing the first part of the code as follows (changes in bold), but when I click on any cell on Sheet2 that has the data validation rule applied, VB returns the error “Run-time error ‘1004’: Method ‘Range” of object ‘_Worksheet’ failed.” If I go into the debugger, the second instance of “If Not Intersect(Target, Range(dataList)) Is Nothing Then” is highlighted.
[Code] .....
Automatically Update A Selection In A Drop Down List From A Cell Value Change
Jul 31, 2008I have two worksheets...
Sheet 1
A1: description
A2: Target Iteration
A3: Concat A1, A2.
Sheet 2.
A1: Drop down datavalidation list selected from A3, sheet 1.
On sheet 2, a user can select from the list. If a user changes the value in A2, sheet 1, I want the value that is associated and already selected in A1, sheet 2 to automatically update. There is a 1 to many relationship with the concat and the drop down. In that, sheet 2 can have multiple rows with the same value from sheet 1 A3. Is there a way when A3 sheet 1 changes, to search in A:A in sheet two and update the values for those records that match the original value in A3, sheet 1?
Create List From Multiple Names
Nov 7, 2008Have a list of aprox 50,000 names. in that list names may repeat themselves multiple times. Is there a way in excel to extrapolate from that list of 50k to display only a single instance of each name in a separate Colum?
View 2 Replies View RelatedHow To Create Sheets From A List Of Names
Mar 1, 2012I have a macro that creates sheets from a list of names. I have a template which is copied.
Sub CreateSheetsFromAList()
Dim MyCell As Range, MyRange As Range
Dim MySheetName As String
[Code]...
Sometimes I have to update that name list.
What I need is to have some addition that checks if the sheet does exist, if it does I want to skip and move on to the next name.
Create List Of All Named Range Names
Oct 17, 2006I have a worksheet where a number of the cells have been assigned names. I want to copy these cell names & create a list on another part of the worksheet. Does anyone have some code I could use to achieve this?
View 8 Replies View RelatedCreate Macro To Pull From List And Then Update Charts And Print
Nov 1, 2013I am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.
Sub Update()
'
' Update Macro
'
'
Selection.Copy
ActiveSheet.Next.Select
Range("B2").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Calculate
[Code] ......
Loop Through Multiple Files To Create List Of Tab Names
Jul 26, 2013I have a folder with 20 Excel files. I'm trying to create a master list of all the tab names. I can see all of the files opening, but it only copies some of the names.
VB:
Sub GetTabNames()
Dim wkBook1, wkBook2 As Workbook
Dim stFilePath1 As String
Dim FileList(1 To 18) As String
Dim iLoopSheet, iLoopProg As Integer
Application.ScreenUpdating = False
[Code] .....
Create Multiple Workbooks With Names Based On List
Sep 2, 2007I have some very tedious work to do in Excel:
table looks like following:
DepID name function
S1 a YY
S1 b XX
S1 c ww
S2 d oo
S3 e ii
S3 f ll
S4 t mm
. . . . . .. . . .
. . . . . .. . . .
. . . . . .. . . .
S7999 u ee
S7999 w aa
My task is to create new folders for each department according to DepID, which means if there are 7999 departments, I have to create 7999 folders, any VBA code can do this?
Create Sheets With Month Names By Date List
Jan 11, 2008I'm trying to achieve is to write a macro that can search a column of dates then open new worksheets according to the months that are present in the column of dates. So, for example, if the column has dates ranging from January to June, I need the macro to open 6 new worksheets and label them January, February, March, April, May and June.
View 6 Replies View RelatedAutomatically Create List / Table From Data That Changes Often
May 30, 2013I have a client list/table that gets new data each day. (ALL) - see file
I need to create separate lists/tables on new sheets from the main data sheet (ALL) base on certain conditions/criteria...
On the (ID) sheet I need all the clients that have ID numbers to display, on the (Reg no) sheet I need all the clients with Reg numbers to display... etc.
Like I said that the main data sheet grows each day and the lists/tables on the other sheets needs to automatically include all the new clients that's entered.
Is there a way to do this using formulas or do I need code to do this?
Excel 2010 :: Create Master List Worksheet From Lists Of Names On Several Worksheets
Jun 6, 2013I'm using Excel 2010. I have a workbook that has six or seven worksheets in it. Each worksheet has a header row, and then lists of clients at the clinic where I work. The columns are last name, first name, medicaid #, social security #, DOB. We use these lists every month to verify that each client has Medicaid for the month. Therefore, there are also columns with names like April, May, June where we mark yes or no for each client. Some of the worksheets also have information about the clients' guardian, phone number, etc., but not every worksheet has those. (I can't show you the worksheets b/c of federal privacy laws, of course.)
I really, really want a worksheet that's a master list of the data from each of the existing worksheets, and I'd like to keep it synced to the source worksheets. I'd love it if I could also add a column telling me which of the source worksheets the data originally came from.
I've tried a few things to make it happen, but nothing has worked.
I've tried using the Consolidate function built into Excel as well, but that only works with numbers, not text, and it wants to manipulate the numbers instead of just copying them over.
I've found several macros online that should have worked (including one from this site) but that I wasn't able to install to my worksheet. I followed all the steps for installation, and throught it worked, but when I went back to the Excel file to run the macro, the list of available macros remained emptpy.
Is it possible that corporate IT has disabled the ability to install macros? Is there somewhere in Options were I need to go to turn Macros on?
Update Graph When Sheets Are Added
Oct 20, 2007I am trying to make a line graph of a company's profitability. Each day I add a new page and use data I collect to determine the day's profit. I want the graph to update each time I add a new sheet. The cell that contains the day's final profit is the same cell on every sheet.
View 2 Replies View RelatedAutomatically Create List Of Column Contents Based On Criteria?
Jan 15, 2014I have a spreadsheet that lists dates in row 6, columns V through BE. We use these dates to log attendance for kids, so under each date there may be one of many symbols, such as "x" if the student was there. I would like to create a list of the dates that meet one of two criteria: either blank or containing "WR". So, let's say column Z is blank and Y has "WR" in it. In column FB I would like a list of all of the dates that were blank or WR, so I would want the dates contained in row 6 for Y and Z. Is there a function that will 1) look for a blank or WR across a row, 2) find the associated date for that blank in row 6, and 3) write the in another column in the form of a list, each date separated by commas? Here is an example of my information. I would like for a function to automatically make the list in column FB for any dates that are blank or contain "WR".
V
W
X
Y
Z
AA
AB
AC
...
FB
[code]....
List of Dates Absent
x
x
x
WR
x
x
x
1/23, 1/24
[code]....
Auto Update Graph When New Data Is Added
Jun 9, 2006I have a graph that is showing the date on "Y" axis and a value on "X" axis, when I add a new date and value to my data the graph does not update, it just shows the data when I first created the graph.
How do I get the graph to display the new data I entered ?
I created a line graph by clicking on the "A" in column "A" (Thats where my date is) then clicking on the "B" in column "B" (Thats where my values are) and clicking the create graph button then clicked finished.
Update Pivot Table As New Data Added
Aug 8, 2007I have a pivot table I am try to update. The table references another tab where my data sheet exists. If I add data to the datasheet how can I get my pivot table to recognize the additional information.
View 3 Replies View RelatedFormulas Added From Macro Code Don't Update
Mar 12, 2008I used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.
View 3 Replies View RelatedConsolidate Several Worksheets To Master With Auto Update When New Data Added?
Dec 19, 2012consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
Project Submissions.xlsx
Automatically Update Only With Numbers (ifnumber-update And Go To Next Cell)
Oct 18, 2013Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
Formatting New Rows Added Automatically
Dec 10, 2009I am working on a spreadhseet with multiple tables present on the sheet. Each table has various formatting, merged cells, formulas, and defined lists. I need to have the table add a new row below the last including cell formatting, formulas, defined lists, so I can just keep going through and do data entry. The code adds a row at the end so I don't run into the table below the present one, by monitoring how far away it is from the "Type" cell tag in column A. The code below is a compilation from viewing other threads, but it just does a copy and paste, including the data that was input so I'm looking at a duplicate row. How can I get ito to clear values in the new row? I can't seem to get it to paste xlPasteFormat and xlPasteFormulas
Is the new row in fact being added below the last? I think it's up one after the macro had run through.
Private Sub Worksheet_Change(ByVal Target As Range)
r = Target.Row
c = Target.Column
If c <> 1 Then Exit Sub
Application.EnableEvents = False
NextLineValue = Cells(r + 3, c)
If NextLineValue = "Type" Then
ActiveCell.EntireRow.Insert
ActiveCell.Offset(1, 0).EntireRow.Copy
ActiveCell.Offset(0, 0).EntireRow.PasteSpecial xlPasteAll
Application.CutCopyMode = False
End If
Application.EnableEvents = True
End Sub
Create A Spreadsheet Where A Certain Value Is Added?
Apr 11, 2014I need to create a Spreadsheet where a certain Value is added to the from of the data I enter into the cell. For example: All of my MAC Addresses start with 00:80:64. I want to be able to just type in the last three entries into the cell and have Excell automatically add the value 00:80:64 So I want to be able to add a specified value to ebvery entry in a collumn.
View 1 Replies View Related