I am trying to make a line graph of a company's profitability. Each day I add a new page and use data I collect to determine the day's profit. I want the graph to update each time I add a new sheet. The cell that contains the day's final profit is the same cell on every sheet.
View 2 Replies
I have a graph that is showing the date on "Y" axis and a value on "X" axis, when I add a new date and value to my data the graph does not update, it just shows the data when I first created the graph.
How do I get the graph to display the new data I entered ?
I created a line graph by clicking on the "A" in column "A" (Thats where my date is) then clicking on the "B" in column "B" (Thats where my values are) and clicking the create graph button then clicked finished.
I have attached a copy of the chart and data. My chart starts on the bottom. I had to take out a lot of data but beneath the data shown is much more data..
I want my chart to automatically update when new data is added. Here are the issues. I have several lines of headers and below that my data. Then below my data I have other data that I don't want displayed in the chart (its not shown here because of size limitation of attachmnet).
The new row will be added each time right below the header, right above the
most recent data given. So a row will be added above row 8!
I have a pivot table I am try to update. The table references another tab where my data sheet exists. If I add data to the datasheet how can I get my pivot table to recognize the additional information.
View 3 Replies View RelatedI used VBA to write a number of formulas into various cells in a workbook. After the VBA is done running, I change the values in the cells that are referenced by the cells I wrote formulas in. The formulas do not update after I enter this new information. My calculation is set to automatic, and F9 doesn't help.
View 3 Replies View RelatedI have a worksheet used for a car game. Each row is designated to show one particular car that can be used in the game, so let's say that there are 40 cars taking up 40 rows.
Column A shows the car type and model; column B shows the engine that the cars has represented by a number (the higher the number the better the engine is); and so it continues, Column C shows the transmission; column D the brakes etc.
Underneath the 40 rows (lets say from row 45 to 65) I then have a table with spare-parts that can be used to replace the cars existing parts. This Parts-table is also arranged with engines in column B, transmissions in column C, brakes in column D etc...
This point of this layout is that it should be easy to compare each type of part in the spare-parts table with the corresponding type of part already used in any of the cars as everything is perfectly lined up by the columns.
About the spare-parts table: because the inventory in the spare-parts table often are added to or subtracted from, as parts are won in races or being put on the cars, I have created a macro to sort the parts in each column so as to put the best parts at the top of the table and the bad ones towards the bottom - so far so good.
The problem is this - as I add new cars, the table of spare-parts is pushed down worksheet and that means that the macro no longer will reference the right rows. So the question is this, how do I automatically update the macro to adjust for rows being added above it? I am not really interested in redesigning the worksheet.
Is there a way to automatically create list of the Tab names, and have it automatically update when new tabs are added?
View 2 Replies View Relatedconsolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
Project Submissions.xlsx
how to make all cells displaying an item from the list source update with new information added to list source.
Example:
Cell "A1" on worksheet 2 displays the 3rd slot of information from list source on worsheet 5. I want cell "A1" on worksheet 2 to update when the list source information in the 3rd slot on worksheet 5 is changed.
Notes:
The list is set up by naming the columns on Worksheet 5 and is set as a validation list on the other worksheets. So on Worksheet 2 column "A" has the validation
VB:
AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".
List=(Coulumn A 's name on worksheet 5)
I am having a graph in ppt which should be updated with a data i have.. i started lyk
Code:
Set xlsApp = CreateObject("Excel.Application")
xlsApp.Visible = True
Dim path As String
path = "C:MydocumentsBook1.xls"
Set newxls = xlsApp.Workbooks.Open(path)
Worksheets(sheet3).Activate
I donno how to update it using vba code in ppt .
I have a report that has rolling week by week data (as in YTD). The graphs I have are based on a 13 week period. As I add a week (done by VBA import) I want to update graphs to lastest 13 weeks as in last 13 columns of data on data sheet.
View 4 Replies View RelatedI have a macro that extracts data from a source workbook. The data is owerwritten every time that I use the macro. Now I have a graph that everytime I use the macro does not update with the new data, Is there a clever way to do that? The code for extracting from the workbook is the following:
Sub Extract()
Dim myFileName As Variant
Dim SourceWkbk As Workbook
Dim CurrentWkbk As Workbook
Dim testWks As Worksheet
ActiveWorkbook.Sheets("CURRENCIES").Select
ActiveWindow.SelectedSheets.Delete
myFileName = Application. GetOpenFilename("Excel files,*.xls")
If myFileName = False Then
Exit Sub 'user hit cancel
End If................
I have a Big Question about the SMALL Function in Excel. I would like to know if it is possible to use a syntax that will make the small function update my graph dynamically.
Personnel transfer out of the Department on know dates... but they come in to the Department all the time. I would like to know if I can increase the "range of my data" even if I don't have data in the cells (i.e. B2:B6 have data, I want the range to include B7:B16, which has no data)... When I have no data in the cells I get errors/ circular references...
Ideally, I would like be able to add or remove personnel and the SMALL function would "organize/update" my graph dynamically. Is this possible?
A colleague recorded this macro to insert a row into a column of data which a graph is plotted from to automatically update the graph each time more data is added. I can't figure out how to simplify the VBA and stop it adding a row on row 57 rather than the bottom of the graph.
Code:
Sub Button1_Click()
'
' Button1_Click Macro
'
'
Rows("56:56").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
Range("B57:F57").Select
[Code] ........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Sheets("Sheet1").Range("B3").Value >= -Date And Sheets("Sheet1").Range(" B3").Value
I created a macro that inserts a new worksheet to my workbook and formats the sheet when I push a button on a summary sheet. Everything works except I also want the macro to link information from the new worksheets (formed by the macro) to the summary sheet. But I want to same information from the same cell on each new worksheet to be put into a different cells next to each other on the summary sheet but I don't know if this is possible.
View 4 Replies View RelatedI have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedCould you have a look at my attached sheets?
2 sheets here, one is "TEMP" the other is " SUM".I want to have a command button in the "SUM", in order to do the below actions
1.compare the right now A columns between "SUM" and "TEMP";
2.If it does not exist in "SUM",i.e. it is new,then move the row to the last row of "TEMP";
3.If it exists already in "SUM",then update the row.
I have a big spreadsheet with a number of sheets, some with dynamic lists which take up a lot of processing power, but which I only use rarely. Consequently the whole spreadsheet is running very slowly. Is there a way to set certain sheets to not automatically update, but retain automatic updating on others? I know you can set Calculation to Manual in the Options, but I need to retain automatic calculation on some sheets.
View 9 Replies View RelatedI know I can update the content of a cell on any sheet from other sheet using for example: =SHEET!$G$22. This works ok for text and numbers, but how to get the same result for a function?
Example: in sheet1, cell B3 I have =SUM(A5:A9). When I modify in sheet1, cell B3: =SUM(A1:A9) I need his formula to change on other sheets as well. How to do that?
I don't know why i'm having such trouble with this. I keep getting "Invalid Call or argument". All i need is to loop through sheets 2 to 9 and set the year of 8 pivots per sheet to 2005.
View 2 Replies View RelatedI have a few excel sheets that we use to keep up with clients and the hours spent working on projects for them. We add and delete clients almost every week, and every time we make these changes we have to update all of the linked sheets. I am wondering what is an easy way to have sheets update themselves as we add and delete clients.
View 9 Replies View RelatedI have a excel workbook with One Master Sheet.
The data entered in the master sheet is automatically updated in the sub worksheets through direct links created . Each sub worksheet is a branch of organization. almost 100 branches are there.
The data is entered for all the branches in the Master Sheet at different periods continuously which is to be kept as such.
For example In first day 10th, 15th branch data may be entered in master sheet first and second row, which is getting automatically updated in the respective branch worksheets. But the problem is when the data is entered for any branch( for example 6th branch) in 5th row of Master sheet, in the respective 6th branch sheet also, it is updated only in 5th row only, leaving the first four rows blank. But i want the updation in the branch sheet continuously without any blank rows.
For updation i have used the simple direct link between the cells of Master worksheet and Branch sheets.
How to get the updation in branch worksheets while entering the data in Master sheet without any blank rows.
I've a workbook and it has two sheets. Suppose, I want to link A1(sheet1) and a1(sheet2). If I update any of the cells in any of the sheets the other one will be updated automatically. How can this be possible? Or are there any other alternatives?
View 14 Replies View RelatedI have already got an anwer for this long back from this site. The code was writted by Mr. Krishnakumar
the thread is here :[url]
i need some changes to be made in this code. The existing code creates and updates the details in the sheets automatically from the master data. I just need the sum of Column I in all the sheets after the last row of Column I.
selecting all the sheets and typing the formula in I column is not possible because, the last row in Column I is different in all the sheets.
In sheet 1, the last row of Column I is Row 15, in sheet 2 Row150 is the last row.
I guess something could be done in macros.
follwing is the existing
Sub TestIt()
Dim sWS As Worksheet
Dim Sellers As Range, Seller As Range
Dim lRow As Long, fRow As Integer
Dim CopyRng As Range, ws As Worksheet
I have 3 sheets: 1: master entry sheet that fills data in 5 different excel docs. Then there is another doc that aggregates data from the 5 and presents totals on the data. I am trying to get the end result without having to have 7 different excel files open, but when I enter into the master entry sheet, the data doesn't seem to be "pushed" up to the 5 different docs until each one is opened up. Obviously, the master aggregator is not updated since the 5 don't have the new data. When the files are all opened at the same time, the data flows perfectly, I'm just trying to find a way to avoid having to open the 5 docs in the middle of the process.
View 9 Replies View RelatedEach monday i get a new price list from our supplier. My job is to compare this list with ours and update if neccesary. The reason, why I'm writing here is simple -I need to automate the process. Since their and our pricelist is somewhat different, it's only possible to use selection comparison. So, I need something that can do this:
1. First I open those two files and make a selection on both of them (like all the apples on the supplier list and all the apples on our list)
2. Push a button that executes a code
3. The code compares a value in the first column
4. If it finds a match, compares the data in second column
5. If data is same, color the cell (or the text) lets say yellow
6. If data is different, update field in our pricelist and color the cell (lets say red), so I can find and recheck it later
7. If the supplier has a _new_ product, the code will insert it somewhere in our list. Doesn't matter where, it may as well be a new sheet
8. Compare the next cells in selected area
I have multiple sheets all of which are identical except for the number of rows containing data. I have been trying to create a macro to update these sheets into one 'Master' sheet but I'm having great difficulties due to me needing to leave Column A and Row 1 blank.
I have uploaded example data of what I am after, sheets 2 - 6 need to be automatically updated to the 'Master' sheet when the macro is run.
I am trying to modify the macro that I have put together so that it executes only specific worksheets within a single workbook. In this example, I would like the macro to update worksheets A, B, and C but I have more sheets in my actual file. I am only able to get the macro to work on the active sheet. Attached is my workbook.
VB:
Sub HideColumns()
Application.ScreenUpdating = False
Dim myRange As Range
For Each myRange In Range("B5:M5")
[Code] .....
I have a workbook that I would like the same operation on all sheets except the first sheet in the book every time I update it (which is once a week).
I get data (currency format) for all of my employees on a weekly basis. Unfortunately this data is shown as a negative number and I need to invert these values. (So I use the formula below)... but I have to do this manually for about 35 sheets and I figure I could automate this somehow with a macro. Here's what I do usually and what I would like the macro to do automatically:
I want to insert a column after column G.
I would like to enter the following formula into H2:
=IF(G4="u", "u", IF(G4
