I have a table of data with three columns. In the first column I have different values, but they can also repeat. How can I have VB look at my table and for every distinct value in the first column create a sheet with the value name and paste all the data into that same sheet?
View 9 RepliesI have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL
ATL
ATL
ATL
CEN
CEN
JCK
JCK
etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
I am running a Macro to fix my hyperlinks in excel, and I have several worksheets that I want to preform the same function for but with different new and old strings. The code I'm running is the hyperlink fix code:
Sub Fix192Hyperlinks()
Dim OldStr As String, NewStr As String
Dim hyp As Hyperlink
[Code].....
Code that will autofilter my sheet for rows that contain either a 1,2,3, or 4 in Column "Z". Then, create a new workbook for each unique value in column "O" and save that to a folder on my desktop named "Contracts". Next, while still filtered by by "Z" and for every unique value in column "O", filter and name a sheet in the new workbook for each unique value in column "B". Finally, while the main sheet is filtered I need to copy and paste the visible cells (minus header row) from columns C,D,E,F,G,H,S, and U to consecutive columns in the newly created worksheet beginning in cell "A9".
I am using excel to create some contracts for a few partners. Each partner could work with several of my clients and I need to give each partner a personalized contract for each of my clients with which they work.
I hope my description of the problem is not too confusing. If so, let me know and I will try to clarify exactly what I am trying to say.
I have tried to combine some code that I already have but, being a newb with loops, I can't seem to get it to do everything.
I am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)
View 4 Replies View RelatedI am currently creating a database which involves using a macro to create new worksheets in the workbook. When the macro is run and a work sheet is being inserted, an input box asks the user for a worksheet name.
As you can imagine, the worksheet does not like it when the worksheet name input by the user, is the same as one already existing and so throws up a 1004 error.
In order to resolve this error I have included an error handling code to request the user to input a differnet worksheet name, as the one previously inserted exists.
My problem: It all works fine until the user types in an existing worksheet name twice, so once initially and again when the error handler has prompted a second attempt. On the second incorrect input a 1004 error warning is displayed.
I would like the error handler to keep repeating until a worksheet name that doesn't exist is inserted by the user. Is this possible?
My code so far:
Sub NewTrancheSheet()
'
Sheets("Tranche Sheet Template").Visible = True
Sheets("Tranche Sheet Template").Select
Sheets("Tranche Sheet Template").Copy Before:=Sheets(1)
Sheets("Tranche Sheet Template (2)").Select
Sheets("Tranche Sheet Template (2)").Move After:=Sheets(Sheets.Count)
Sheets("Tranche Sheet Template (2)").Select.................
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx
Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View RelatedI m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies View Relatedi have a workbook blank template for my colleagues to fill in, they fill in this blank template and save it under the serial number of the item they are creating. However a lot of errors exist when they input the serial number inside the workbook where the serial number is a duplicate of a former serial number.
Anyhow i was wondering is there any way when they input the serial number into the worksheet that i could get it to save in a separate workbook and then have conditional formatting to check those serial numbers in the workbook to see if they match?
I need to find a way of updating cells in two separate worksheets. The cell address can vary.
Right now I am using a "button" which when clicked updates the cell value by an increment.
I have a workbook which have worksheets say A to J. I wanted it to be separated into 10 different workbooks A.xlsx, B.xlsx, C.xlsx and so on in drive C. Could anyone help me here?
View 6 Replies View RelatedI have two worksheets and each one has it's own number. Sheet1 has "100" and Sheet2 has "101" and they're located in "A4" on each. Each sheet will have a control button that will be pressed when a sheet is complete. The control button will clear a range of cells "B5:C20" and increase the sheet number in "A4". So if you press the control button on Sheet1 the range will be cleared and the number will change to "102" since Sheet2 is already using "101".
View 2 Replies View RelatedI have two worksheets with one row of 'accounting' type numbers in A1:A100 (it can be shorter or longer) on both sheets. I need to run a search on worksheet one to see which of them exactly match any on the second worksheet and then highlight them.
It can be a macro or it can highlight each entry a different color. Something so that I can determine which two numbers go together and I can run the thing only once.
There most likely will not be multiples on the same worksheet but if there are it will be few. If multiples happen it is ok it just needs to be matched to the second worksheet in a different color than the other similar numbers.
Another thing is if there is no match in either worksheet that is ok it can just skip to the next number in the list and check that one. There does not need to be a match.
I have a workbook with multiple sheets and I want to make these sheets into separate workbooks. I need them to be saved in the same path as the original workbook and automatically named (same filenames as worksheet names). I tried a code from a VBA book, and I got "Object needed" error message.
View 3 Replies View RelatedI have a spreadsheet with these columns:Group_Name
Contact Name
Company Name
Contact ID
Situation:
The Group Name Column has the name of the group that the Contact Name is a member of. The Contact Name could be a member of many Group Names and therefore there may be many rows of the same Contact Name one with each Group Name that they are a member of. I have manually created separate columns for each Group Name in the spreadsheet that is attached.
Goal:
I would like to have a macro that will look at the Group Name column and create a new column for each distinct group. I then would like the macro to go down the Contact Name column (I believe that I will have to have it sorted)and look at the Group Name that is listed in that row and put "True" in the Group Column that was created in the above step. Then, go to the next row, if the Contact Name is the same, look that the Group Name column and put "True" in the corresponding Group Column in the FIRST ROW OF THAT CONTACT NAME. Then Delete that row.
I have the following spreadsheet Columns on master sorted by Column J:
A--------------E-------------J
SUPPLIER----CARRIER------LOC CODE
BELGIUM-----HAM-----------BP
HYDRO-------MSC-----------BP
DAINIPPON---NNR-----------BP
BELGIUM------YM-----------BR
BELGIUM------YM-----------BR
HYDRO-------MSC----------CA
BELGIUM-----HAM-----------CA
HYDRO-------MSC-----------CA
HYDRO-------MSC-----------DE
DAINIPPON---NNR-----------DE
BELGIUM------YM-----------DE
BELGIUM------YM-----------DE
What I need too do based on the Codes in Column J is create a separate workbook for each different code.
How can I code to create a copy of a worksheet in an excel file I am using a macro on, after the macro is done processing? In other words, when the macro completes processing, create a copy of the worksheet labelled "Output", and save it in a directory that the user chooses? Also, would it be possible to create a .pdf file?
View 9 Replies View RelatedIs there a way to compare specific data from three separate worksheets to see if they are equal?
I receive three daily reports that contain some of the same information that must match in order to correctly compile an Executive Report. Currently, I am doing this manually. Is there any way to automate the process to have a warning or something similar pop up if the numbers do not match?
i have a worksheet that has information filled in columns A-N and rows 3-7262 (not including title and labels)
i need a macros that will separate this data into multiple worksheets based on the word in Column A; these words could be HDA, CCR/NHT, GRU/ATU (essentially dividing this data up by area name, there will be 14 worksheets)
i would also like to be able to update this master worksheet and have it be reflected in the multiple worksheets that are divided by their areas.
I have multiple files in a folder.
The files are named:
File1.xls
File2.xls
File3.xls
....and so on; the number of files varies. I am trying to write a macro, to combine all *.xls files in one workbook having each file as a separate worksheet.
I have a macro below which splits the data in my workbook (Attached) into seperate workbooks on the basis of each change in data, and saves the new workbooks with the value available in column A. Everything else works perfectly with this code I just want the code to take the workbook name from Column B, not Column A as it is currently taking.
Sub Test()
Dim Sh As Worksheet
Dim Rng As Range
Dim c As Range
Dim List As New Collection
Dim Item As Variant
[Code] ......
I have a spreadsheet of ~5000 rows of data that I would like to separate based on the product code column (11 product codes - 43,301,304,313,332,334,979,984,985,986,992). As it stands, I've been copying the sheets, then removing the data by filter, but doing this every week seems to be a waste of time.
View 9 Replies View RelatedThe following code takes a large range of data (currently 20K+ rows) and breaks it out into separate worksheets. This takes a while, and I have been trying to insert a progress bar into this macro, but the progress bar goes in reverse (from 100 to 0) but the userform will not unload at the end.
Sub MoveCells()
Dim objBook As Workbook
Dim objSheet As Worksheet
Dim lngRowSpace As Long
Dim strName As String
Dim lngTimeRow As Long
Dim lngStartRow As Long
Dim lngInteration As Long
Dim strDataSheet As String
Dim boolError As Boolean
Dim counter As Integer
Dim PctDone As Single
I have a data sheet of 190,000 lines. It is a telecommunications bill with has approx 15 columns.
I need to separate the spreed sheet into the respective "call types" and put this data onto separate tabs, at the moment I do it all manually with Excel 2007.
Is there a way of automating this separation of data
I have a code that will create separate sheets from “SDL_Calendar” sheet for each team and its working fine. Modify the code to create sheets for each Team BY YEAR based on user selection in Cells “H6”, “H7” and “H8” in “P6_Report” sheet. For filtering BY YEAR Column "D" Can be Used in “SDL_Calendar” sheet.
I have attached the work book of what I am trying to accomplish :
[Code] ......
CreateSheetsByYear_new.xlsm
For Each wksht In ActiveWorkbook.Worksheets
i = i + 1
ReDim Preserve wkshtnames(1 To i)
wkshtnames(i) = wksht.Name
x = wksht.Range("A1:B2").Value
Next wksht
I need to split the data into worksheets (see attached) by the Advertiser column and then by the deal year and deal code columns. I need each worksheet to be named per advertiser and deal year_deal code. I took off and replaced the data since it is sensitive information.
creating a macro or implicating one into the workbook to run for future reporting.
I am looking to split data in a worksheet into separate sheets based on Column C which contains Either Babycare or Homecare or Industrial or Professional. Eventually there maybe more names. If possible I would also like to name each sheet.
My VBA skills is limited to this particular task.