I have a workbook with multiple sheets and I want to make these sheets into separate workbooks. I need them to be saved in the same path as the original workbook and automatically named (same filenames as worksheet names). I tried a code from a VBA book, and I got "Object needed" error message.
View 3 RepliesI have a workbook which have worksheets say A to J. I wanted it to be separated into 10 different workbooks A.xlsx, B.xlsx, C.xlsx and so on in drive C. Could anyone help me here?
View 6 Replies View RelatedI have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets
2. Open Workbook A-2014 paste the sheets
3. Save and close Workbook A-2014
4. Close workbook A without saving
then doing the same for Workbook B, etc.
I am looking for the VBA code to copy worksheets (with formatting) and save to a specific folder. The steps I am need to follow are:
Create a copy of the first worksheet
Save it to a specified folder and name it with the worksheet name
Repeat with all worksheets until the end of the workbook
I'm trying to copy worksheets from different workbooks to one workbook, but it doesnt work. This my code, can anyone spot the error?
The problem is that it stops at the workbook that all the worksheets are supposed to be copied to.
Sub Makro11()
'
' Makro11 Makro
' Makrot inspelat 2008-03-17 av White
'
' Kortkommando: Ctrl+w
'
namn = ActiveWorkbook.Name
ActiveSheet.Select
If ActiveSheet.Range("B3") = "" Then
ActiveSheet.Range("B3") = "v 16,"
End If
If ActiveSheet.Range("B3") = "v 15," Then
ActiveSheet.Range("B3") = "v 16,"
End If
ActiveSheet.Copy Before:=Workbooks( _
"KI.xls").Sheets(2)
Windows(namn).Activate
ActiveWorkbook.Save
ActiveWorkbook.Close
End Sub
I have a master workbook that has three sheets: Application, Equipment, Storage. I have over 500 other workbooks that have those same three sheets in them. Those workbooks also have other worksheets that I do not want. How can I create a macro that will open every one of those workbooks and copy over the data from each one of those 3 sheets into it's counter part in the master workbook?
View 3 Replies View RelatedAll i need to do is copy all worksheets in lots of workbooks into one workbook with multiple sheets, easy right!!
View 2 Replies View RelatedHave a workbook with approximately 25 worksheets in it.
I want to copy/paste/value each worksheet and save it as it's own workbook.
My code doesn't work, it hangs up on ws.copy every single time, on Excel 2007 and prior versions.
Sub SaveWS()
Dim wb As Workbook
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
ws.Copy
Set wb = ActiveWorkbook
wb.SaveAs "t:dir1expenses" & ws.Name & ".xls"
wb.Close False
Next ws
End Sub
I am trying to copy worksheets from a master workbook to numerous other destination workbooks. I would like the code to check if the destination workbooks already contain any of the sheets being copied and if this is the case, miss out that sheet and move on to the next. Currently, if duplicate sheets are present, a second sheet is created and copied to the destination file.
VB:
Sub CopyTrend()
Dim Filename1, sFileNameAndPath, sThisWorkbookName As String
[Code].....
I have an application where I create up to 400 worksheets based on imported data.
These worksheets are named programatically with a main name and a sheet index number (to ensure no duplication of sheet names).
Typical Sheet names are "VARIOUS (1)"; "VARIOUS (2)"; "PART 1000 (3)"; "PART 1000 (4)"; "PART 1001 (5)"; "PART 1001 (6)" etc.
I want to be able to loop through all the sheets and copy similar named worksheets to seperate workbooks. So all the VARIOUS go to one workbook, all the PART 1000 goto another, and all the PART 1001 goto another. I can only determine the worksheet names by looping through all sheets - as I am not sure what they will be called because it is done programmatically. ALL sheets will contain a "(n)" where n is the sheet number, so I believe can extract similar names from the string preceding the left bracket.
At the moment I just lump ALL the worksheets irrespective of name to a single workbook creating an array and using the SPLIT function. This is very efficient and what it does, and I still want to use the SPLIT function and arrays.
this is the code I currently use, any help much appreciated!!! Please tell me how to modify this existing code to clump together similar names and copy - I guess I will need to loop multiple times to achieve this.
For Each mySheet In ActiveWorkbook.Sheets
Range("Arc").Value = "'" & Range("Arc") & "," & mySheet.Name
If Left(Range("Arc").Value, 1) = "," Then
Range("Arc").Value = "'" & Right(Range("Arc").Value, Len(Range("Arc").Value) - 1)
End If
Next
Sheets(Split(Range("Arc").Value, ",")).Select
Sheets(Split(Range("Arc").Value, ",")).Copy
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
Also some of the rows and columns are merged.
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx
The following code won't let me copy from the first workbook. I get a run time 1004 error stating "That command cannot be used on multiple selections".
I would rather not have to copy this by column for each of the 4 workbooks
[Code].....
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies View RelatedI have 24differnet workbooks each with one sheet with data. Each sheet has the sae headers with differen amounts of info under the headers. I am looking for a quick way to get all 24 sheets in to one workbook instead of copying and paste.
View 3 Replies View RelatedI have 2 separate workbooks and I would like the Vlookup function to look for the value in "DO" after matching the both "Job Sheet". I have attached 2 files for better understanding.
View 4 Replies View RelatedI am trying to find a way where I can just enter the information into one and have it flood to the other.
worksheetA is the master sheet which contains data on all accounts - the order and number of entries on this account changes monthly.
worksheetB shows data only on a single account.
What I am looking to do is to take the account name from worksheetB find the data I entered in worksheetA and have that flow to the apporitate cells in worksheetB.
Something like this
cell on worksheetB displaying number of vehicles - if worksheetB(cell with the account name) = worksheetA(range of cells with multiplenames) if the two match somewhere on the list then display the number of vehicles from a cell in another coloum same row.
sorry if its confusing, tried my best to explain it. I'm sure it can be done with VB but just don't know that one much, is the syntax and language similar to the old ms basic?
I would like to separate data into multiple workbooks based on a unique value in the column. For instance if I have Departments in Column F, that has data of accounting, HR, etc. I would like to put all accounting data into a accounting workbook and all HR data in a HR workbook.
View 4 Replies View RelatedI have 2 workbooks open and I want to set up formulas from one linking to the other. When I toggle on the task bar between the 2 workbooks they replace each other within the same window so I can only see one workbook at a time. How do I set it up so I can have 2 separate windows open at the same time, one with each workbook in it? I tried 'side by side' in one window but the viewing area is too small.
View 9 Replies View RelatedI have workbooks based on the date. Here is an example "Daily Numbers Report - Summary_2014_02-18-06-02-30"
All of the files are formatted this way. Then, in a master file I have dates going horizontally for the entire year in the following format Tue Jan 15, etc. How could I do a lookup that would grab from all of the open files and match the date BUT subtract 1 day from that date for all the lookups, so Feb 18 would look at 2-17?
I have a large workbook with many worksheets which are all grouped into pairs - i.e. Sheet1 & Sheet2 go together, Sheet3 & Sheet4 go together; Sheet5 & Sheet6 go together, etc. etc.
I need a macro to divide this workbook into separate workbooks where each group of worksheets has a separate file of its own and I want to name the new workbooks after the second sheet in each group:
i.e. A new workbook for Sheet1 & Sheet2 called Sheet2.xls; a new workbook for Sheet3 & Sheet4 called Sheet4.xls; a new workbook for Sheet5 & Sheet6 called Sheet6.xls; etc. etc. etc.
I have 5 worksheets in file Z on drive J which are full of VLOOKUP formulas pulling data from several files on drive K. Each worksheet pulls data from it's own file on drive K...ie, worksheet AB pulls all of it's data from file AB_2008, etc. On worksheet CD there are two rows which populate with #N/A when I open file Z, but if I open file CD_2008, the #N/A's automatically populate with the correct values. Any ideas??? I am not a programer but I have pretty fair excel skills...but this one has stumped me.
Here's my formula:
=VLOOKUP($A19,'K:sopworkbookssop_2008[sop_2008_rt.xls]11-RT-PPR'!$A:$BQ,C$34,FALSE)
I have created a workbook for a co-worker. The way it works is data comes from an outside source with customer names in Column A and their Account Reps in Column H. This data is pasted into a template that I created with a very simple macro recording that filters on each Account Rep and is copied and pasted each into a different workbook. Then I had to go through each workbook (because of the info being sensitive) and create a macro that deletes the unwanted data because when the data is pasted it transfers all of the data and you can unfilter to see the full sheet.
I know there is a better way to extract data on each change in column H into a new workbook. Does anyone know how to do that? Another issue is the original data is not very clean so there are blank rows in the list. For Example:
CustomerTechnology SegmentOpportunity Dollars ($)Opportunity StatusAction Item(s)(ST) or (LT)Due dateAcct RepCustomer 1Action 1ST3/30/2008ACCustomer 2Technology 1Action 2LTTBDACCustomer 3Technology 2$10,000FindAction 3LTTBDACCustomer 4Technology 3FindAction 4LTTBDBHCustomer 5Technology 4FindAction 5LT1/31/2008BHCustomer 6$30,000Action 6LTTBDBHCustomer 7Action 7LTTBDMJCustomer 8Technology 5$10,000QualifiedAction 8ST3/1/2008MJCustomer 9Technology 6QualifiedAction 9ST2/28/2008CGCGCustomer 10Technology 7$18,000FindAction 10ST3/1/2008CGCustomer 11Technology 8$10,000QualifiedAction 11ST3/30/2008BHCustomer 12Technology 9FindAction 12LTTBDACCustomer 13FindAction 13LT3/15/2008AC
I'm trying to automate a search and match function between two separate workbooks using VBA and am having some problems. I'm using the following line:
search_results = Application.Match(temp, Range("E1:E900"), 0)
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
View 2 Replies View RelatedI'm linking some data from 2 workbooks in the same folder (using excel 2013)
I have a main rota that works great, called "Main Rota.xlsm" I then have a separate basic file called Email Rota.xlsx without all of the bells and whistles of the Main Rota, purley made to email out to staff.
I store both files in the same folder "Site Rota" and it works fine.... until I rename the folder or move the folder to my laptop.
The link in the Email Rota looks like so to start (calling cell A3 from the Main Rota) ='[Main Rota.xlsm]Planning Rota'!A3
As I said it works fine until I move the folder onto my laptop the link then changes to
='D:DesktopSite Rota[Main Rota.xlsm]Planning Rota'!A3
And I have to keep updating the link, I have read online that it isn't supposed to work like this and its supposed to read the file "cleverly" in the same folder ?
I would ideally like to keep both files in the same folder and to update from visa versa without having to update the links if I move it from PC to laptop with I do daily .
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
I have 30 xlsx files in a folder and I want the first sheet of all that files to be merged to a new workbook. The thing is I don't want the macro to copy paste the value in to the same sheet of the new master sheet like Ron's excel merge tool does. I want a macro to create new 30 sheets on the master file and copy the data from source files. And I want the newly added sheets to be renamed as the source file name. This works well except the sheet renaming thing.
Sub Merge2MultiSheets()
Dim wbDst As Workbook
Dim wbSrc As Workbook
[Code].....
I need to write a macro to split an excel file into separate workbooks and automatically email our project managers.
View 1 Replies View Related