Creating List Of Items Selected (Yes) Without Duplicates
Jan 19, 2014
I have attached a sample of what im trying to do here.
A2:A10 i have items, B2:B10 they can selected "yes" or "no" and C2:C10 the values
What I would like is, is "yes" was selected, i would like the item name added to a list. so basically:
=IF(A2:A10="YES",A2:A10)
And then I can just add the value to each item later but I need to remove duplicates and obv have this carried throughout the cells.
Attached File: TEST.xlsx
View 10 Replies
ADVERTISEMENT
Jul 17, 2009
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
View 9 Replies
View Related
Mar 2, 2014
I've created a range B3:B12 in which each cell returns TRUE of FALSE. There corresponding values are listed in C3:C12. I have the same thing again in D3:D12 and E3:E12. Checkboxes link to the TRUE/FALSE cells. Attached is a stripped down file to show this.
I want to create a formula that lists each item in the one cell (no spaces required inbetween) for use with a search. I know a long winded way to do this involving many IFs but any array will be much more tidier, thing is I hardly use arrays and have struggled with this one.
I'm thinking it will be along the lines of =IF(B3:B12="TRUE",C3:C12,"")&IF(D3:D12="TRUE",E3:E12,"") but exactly what it should be is beyond me.
EDIT: The original file attached was corrupt for some reason, the new attachedment is the same except instead of TRUE/FALSE cells I've set them to 'x' for quickness (lost my work...!).
View 3 Replies
View Related
May 22, 2009
I have 2 sheets, 1 sheet has a list of materials that require Certifications. The 2nd sheet is actually a report of which materials is needed for the specific job at hand. Column C will be linked to check boxes on a different sheet in the future (thats why i used True/false instead of Yes/no). What i would like to happen is when a cell in Column C is TRUE the information in column B be sent to the Certifications sheet in a list from C8 to C34 with no spaces.
View 3 Replies
View Related
Apr 23, 2014
I have a list of names and an associating number with those names. I'd like to create a dynamic top 10 list, but my problem is that I have duplicate values, here's a sample:
[Code].....
I tried to use LARGE and INDEX to create a top ten list like this:
=LARGE(Names,ROW(1:10))
=INDEX(Names,MATCH(T2,Count,0),1)
But, when the list comes out, it shows only the first entry with a duplicate result:
[Code] ....
How I can get it to grab the second "Name" with the same value as the first?
View 6 Replies
View Related
Aug 22, 2014
I have a global list in B column and I want to create a text about the list. If I put "1" in A column, I want my text to be on B11 for the selected items. So excel should do a loop for the selected range and combine the selected items in a new line and give me as an output.
You may see the picture Untitled 1.jpg
View 2 Replies
View Related
Jun 1, 2006
I need to count the unique for a customer. The areas to be counted are separated by blank lines. At present, I am using sumproduct(1/countif(range1,range1), to count the unique items. This formula works perfectly except that it takes me almost an hour to do this for all the measurements. Is there a macro that can provide me with the same results -- putting the same values where I am presently have the formulas (the cells that before the blank lines)?
View 6 Replies
View Related
Aug 16, 2013
I have a product list where each row of the worksheet has an image, product details and suggested lists/retails for each local currency.
Some products are not available in certain countries and each market doesn't care to see the other market info. (There are hundreds of items and dozens of countries.)
How can I create a drop down selector so that a user can choose their market, i.e. "Australia," and only the rows and columns relevant to them appear?
Can this be done without macros,? This sheet is distributed among 100+ people and needs to work for lowest common denominator.
View 3 Replies
View Related
Dec 26, 2013
I am wanting to create a list where I can select multiple items within that list and then print only those selected items. I have created something similar thru data validation, but I can't get it to print.
In addition, I would like to be able to subdivide the list into multiple categories, then select items from these multiple categories and print them.
View 3 Replies
View Related
Jul 13, 2009
I have a list of line items and I want to be able to see how many duplicates in Column A and B.
Column A has text field and column B is a numeric field
I thought I could use INDEX MATCH but I'm unsure.
View 2 Replies
View Related
Dec 3, 2011
I need to add items to a combobox without adding duplicates or empty data. I am able to add without empty data but how to ignore the duplicates.
Here is what I have...
Code:
Dim GL As Range
Dim ws1 As Worksheet
Set ws1 = Worksheets("Main")
For Each GL In ws1.Range("MainGL")
If IsEmpty(GL) Then
'do nothing
Else
ComboBox2.AddItem GL.Value
End If
Next GL
View 3 Replies
View Related
May 16, 2006
I have 2 huge lists. One is " the Master list" which I have to extract items that are not already listed on the second list . I don't want to remove duplicate entries,I want to remove the duplicates completely. in both lists, so that I only have items that are not in the second list...
like this..
List 1:
# $ % & * ! @
List 2:
# & @
so I want to end up with:
$ % * !
View 8 Replies
View Related
Feb 27, 2014
I have a (MultiSelect) ListBox1 that is populated with Customer Names for the user to select from. I want the user to be able to hit the CommandButton1 adjacent to the ListBox1, and the selected Customers copy into/get added to the ListBox2.
I have the following code, adapted from other code, but it is not working:
[Code] ........
View 2 Replies
View Related
Sep 22, 2008
I have the following code that carries out a selection and then brings up in a print preview.
View 13 Replies
View Related
Jun 5, 2009
I have a listing of schools, some records selected with a "Y". When all of the desired schools have been selected, I want to run a macro that will scan through those cells and, for each one that is selected, put the school name into a string. I want that resultant string to be written to a cell.
Here's an example of the data:
View 2 Replies
View Related
Dec 5, 2007
I have a listbox with several items selected. Is there a way to automatically show the selected items in the worksheet (as values in cells)?
View 8 Replies
View Related
Feb 10, 2014
I have an excel sheet with data where I have column A index number, B company name, c empty, d data , e with item.
[Code] ......
What I trying to do is I made a dropdown for company list and i select comp1 then i want to populate items list with out duplicates .
View 2 Replies
View Related
Mar 16, 2014
I am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
Here's what I have so far...
[Code] ......
View 2 Replies
View Related
May 15, 2013
I have a treeview box w/ multi-select enable. My question is how do I display in a message box of all the item I've selected.
View 1 Replies
View Related
Feb 28, 2014
Returning items selected from a ListBox. I have a Multiselect Listbox with 15 items. Additionally, I have a worksheet with 15 columns (each one corresponding to the 15 ListBox items). I'm looking for code that will do the following:
After a user selects values from the ListBox (can be more than 1, thus the Multiselect), I would like for "TRUE" to appear in row 2 of the worksheet for each column. (IE: Column A is for Bikes, if a user selects "Bikes" from the ListBox and hits a CommandButton, I would like for A2 to say "TRUE".
View 5 Replies
View Related
Jul 3, 2007
I have listbox of information set up to have a user choose several items. I want the items to then transfer to another worksheet. I am using the code I found here:
Private Sub CommandButton2_Click()
Dim lItem As Long
For lItem = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(lItem) = True Then
Sheet2. Range("A65536").End(xlUp)(2, 1) = ListBox1.List(lItem)
ListBox1.Selected(lItem) = False
End If
Next
End Sub
But it is only moving The first item in a column, instead of all the columns of information. What do i do to get it to move all the information??
View 9 Replies
View Related
Jan 22, 2008
When i tranfer my listbox content to sheet the selected item remain selected in listbox
Dim i As Long, j As Long
For i = 0 To Me.ListBox2.ListCount - 1
If Me.ListBox2.Selected(i) Then
j = j + 1
Worksheets("Workings"). Range("AA" & i + 2).Resize(1, 1).Copy Worksheets("Print").Range("B" & Rows.Count).End(xlUp).Offset(1)
ListBox1.Selected(i) = False
End If
Next i
View 2 Replies
View Related
Feb 14, 2008
The following code populates a forms' second listbox (Elements_lbx) with True. No amount of diddling (by me) can get the selected items from form's first listbox (Content_lbx) moved over to the second. (NB. the list box isn't the standard VBA listbox but an open source: ListEX from Marco Bellinaso.)
Private Sub CommandButton2_Click()
Dim lbx_Sel As Long
' loops through ListBox to test if it is selected
For lbx_Sel = 0 To Content_lbx.ListCount - 1
If Content_lbx.Selected(lbx_Sel) = True Then
Me.Elements_lbx.AddItem Me.Content_lbx.Selected(lbx_Sel)
'
'Clear the selected item
Content_lbx.Selected(lbx_Sel) = False
End If
Next
End Sub
View 9 Replies
View Related
Jun 4, 2012
I am trying to create a large range composed of smaller ranges. Some of these ranges may overlap so I want to make sure when I add cells to the range they don't already exist. I know how to make sure the same value doesn't exist in a range, but not the same cell.
View 2 Replies
View Related
Apr 6, 2007
Looking to create a drop down list on the top of a column that will find all entries with that numerical value. For example, lets say I have four entries with the value 1234 spread out through the columns. When I click the drop down menu, it should only have 1234 once and when I click it, it shows me all the rows with that entry.
View 2 Replies
View Related
Feb 21, 2014
I am trying to create a document that runs a scenario based on the two drop down choices selected that determines which worksheet in the workbook autopopulates over to sheet one based on the selection. I tried doing an if statement but did not have any luck.
View 1 Replies
View Related
Oct 25, 2009
i have a multi select listbox that i want to be able to remove the selected items in one hit.
i have not been able to convert code for removing single selected items and could not find a working example.
this is probley the closest though cos its removing items it plays havoc with the listcount
View 7 Replies
View Related
Sep 26, 2013
I have two pivot tables, both of which source the same sheet of data. Each record in the data has two fields, Region ID of person and Region ID of facility, that reference the same list of Region IDs via vlookup (it's just numbers 1-12). Either one or both can be blank. One pivot outputs counts by person Region ID, and the other, by facility Region ID.
Using a combination of nested IF statements and vlookups, I tried making a third Region ID field that could be used as a slicer to control both tables, but what I end up with is an undercount in one of the tables. The only thing that works so far to output the correct counts is having two separate slicers, the facility Region ID being the slicer for one and the person Region ID being the slicer for the other. If the end user wants to see counts for one Region ID, they have to manually set one slicer equal to the other. But what we want is just for the end user to be able to control both tables just by pushing a single number, Region IDs 1-12.
I can make one of the slicers hidden but then how do I get the hidden slicer to automatically select Region ID values equal to the nonhidden slicer? Alternatively, I could somehow program a combo box or list to control the two different slicers, then the slicers would be hidden and the user would see only the combo box/list. (I guess in either of these alternatives, I could just use a report filter instead of a slicer; either way, I still have to get items in one to automatically select based on the user's selected items in another).
FYI, some of the options I looked up involved PowerPivot, which I do not have access to. VBAs/macros are ok.
View 2 Replies
View Related
Aug 9, 2014
I have a userform in excel....the listbox "listbox1" has over 1000 items....and i have a label "label5" also.
What i want is if I select for example 10 items from the listbox1 to be shown in the label5 directly....and of course if i select or deselect any item will be applied in the label
For example...selected items from listbox are;
5
6
7
8
9
the label will show me the same
5
6
7
8
9
Code while noting that the list box has many columns...so i want to select which column to be appeared in label.
View 2 Replies
View Related
Jun 22, 2012
I have a pivot table which I want to force the all of the pivot table items to be selected for a particular pivot table field. One would think that this would be as easy as unlocking all cells on the sheet with the exception of this pivot field and then locking the worksheet. This doesn't work though as I am generating multiple pivot tables on the same workbook for the same range and I get this message: "this command cannot be performed while a protected sheet contains another PivotTable report based on the same data source...".
My thinking is that I can do something along the lines of this:
Private Sub Worksheet_PivotTableUpdate(ByVal Target As PivotTable)
Dim oPI As PivotItem
Application.ScreenUpdating = False
If Target.PivotFields("Item Sold").PivotItems.Count Target.PivotFields("Item Sold").VisibleItems.Count Then
[Code]..
This is failing right away though on the If Target.Pivot.... line.
View 1 Replies
View Related
