I have an excel sheet with data where I have column A index number, B company name, c empty, d data , e with item.
[Code] ......
What I trying to do is I made a dropdown for company list and i select comp1 then i want to populate items list with out duplicates .
I have code that pulls data from multiple sheets in a folder and throws a time stamp in the row/col. The data can have duplicates when adding to the master sheet. What I would like is to delete the duplicate row that is furthest from the NOW date.
Criteria for duplicates are based off of Col A. Time stamp is in Col G.
Highlighted rows would be deleted:
Sheet1
*
A
B
C
D
E
F
G
1
Item
*
*
*
*
*
Imported
2
112
a
b
c
d
*
Apr-5-2013 08:53:19
[Code] ..........
I'm trying to set up a diet/training spreadsheet so that when a client enters foods and exercises they don't want/can't do, those foods and exercises are made unavailable in dropdown menus (on my programming sheet) so that I can't inadvertently put them into their plans. I have a webform they fill out, which automatically puts the data into a spreadsheet and I know how to pull data from there into the clients' workbooks...
View 2 Replies View RelatedThe file is attached here. I would like to be able to autopopulate cells based on a dropdown. The first tab has the final report and the other 2 tabs are the raw files.
KMPH_Inventory.xlsx
I have a list of staff in cell A1 in a drop down list. In cell A2, I would like Excel to populate automatically the branch from which the staff is from when I choose the staff name in cell A1.
View 3 Replies View RelatedI found many examples on this forum of how one can pull in data from closed workbooks, or copy it and have it stored in the active sheet. So far so good, but I need a solution which would do the opposite - I need the macro to take a range of data form the active sheet store it in a closed workbook and save any changes in the target workbook without opening it.
View 2 Replies View RelatedI have attached the sheet :
Certain job descriptions require certain training. Drivers needs these two particular trainings and an office employee only needs that training...
I have a reference sheet with what trainings are required for what job. I then want the next chart with each employee name and subsequent job title to have the required trainings automatically checked. (I can take care of the conditional formatting after that).
Job Desc.xlsx
I've been trying to get a table to populate based on a couple of criteria. However, I've not come-up with the solution yet.
I have my dropdown selections in cells C2 & C3. The objective is to populate the table below the dropdown with data from the sheet named (very unimaginatively) 'Data'. Currently you see the selection AA-11 & Mar-14 in the Contract ID & Month cells. If I change this, the table below should auto-populate.
I've attempted using Vlookup, Index-Match. But it does not give me the desired result.
Also, the number of Products can change each month (although the file shows 4 for each month & each Account).
I have a dropdown list selection on the form for types of machines. The list of machines, their sizes and related noise level are in a chart on worksheet 2 and I'd like to automate the form so that when the machine is selected, the related noise level auto populates.
The dropdown box has been put in the form using the data validation function.
I have a workbook with 7 different Sheets to pull data from. On Sheet 3 named "PMP Mileage Linear". I have 4 drop down boxes. In one drop down labeled "Drop Down 4" there are 21 different choices to choose from. Based on the choice I would like to hide or unhide Rows. Example: if a user chooses "3yr/36,000 Miles". I would like to hide rows 16:51. If a user chooses "3yr/60,000 Miles". I would like to hide rows 29:51 (hence un-hiding 16:28). If a user chooses "5yr/100,000 Miles" I would like only rows 41:51 hidden and so on until a user hits the max of 125,000 Miles (5,6 or 7Yr) whereas no rows are hidden. I would have attached the spreadsheet but I don't have permission from the people who own the data.
View 7 Replies View RelatedI am trying to tell the spreadsheet that if column G *and* column V are both identical to another row's column G and V, then the entire row is a duplicate and to highlight and delete it. I also want to record a macro of this process to apply to all spreadsheets.
Here are the tutorials I am looking at, but whatever I am doing is not working the way it is working for them.
Conditional Formatting, find duplicates with multiple columns [URL]...
I am highlighting cell A2, and under Conditional Formatting, I select "Formula Is" =SUM(COUNTIF($G:$G,G2),COUNTIF($V:$V,G2))>1
Then I select the format as light orange text, but it is only highlighting A2....
That is as far as I have gotten, and I still do not know how to go about deleting the duplicate entries. I have also read there are issues with recording a macro when trying to find duplicates using more than one column in the formula, but I have not gotten that far so I can't test it.
As is likely evident in my formula and process, I am not very experienced with Excel.
I have Workbook A populated with skus from a report and I want to remove all rows in this workbook that do not have a matching sku in Workbook B. Each workbook contains only one sheet and the skus are in column 1 of both workbooks.
Also, I am looking for a good resource/tutorial for working with workbooks, worksheets and ranges within. I don't anticipate this being the last time I will be confronted with this and would like to learn more.
I have the catalog #s of some products in column A, and I have the brand in column B, Product name in Column C, and the model # in Column D. I want to create a formula that if I select the catalog # it should autopopulate the brand in column B, product name in column C and the model # in column D!!
And I have the brand/product & model # in a different sheet!!
For example, I have a master sheet that has a drop-down list of the months January and February, which have their own sheets. I am trying to populate the sales of the week 1, 2 ,3 ,4 in the master sheet based on the same data for the month chosen.
View 2 Replies View RelatedHow to populate data between 2 linked file based on the Dropdown Validations?
View 10 Replies View RelatedI'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
[URL]....When I select a name in column B, it populates column C's dropdown with that name's list of units. When I select a unity type in column C, I'd like it to automatically populate column E in the same row with the value associated with that unit. The values associated with a particular unit can be found to the right of the sheet. So if in row 2 I select Blake in column B, then Unit 5 in column C, I'd like column E to be populated with 14.
Edit: using Excel 2007.
I attached stripped down version of the sheet which is small enough to post. None of the things I removed should affect the topic at hand. The full sheet is available at rapidshare.
I'm trying to Count duplicate text on sheet 2 and populate the number of times repeated on sheet 1.
On sheet 1 I have A3:A128 and would like the number of times these respective cost centers are repeated in Sheet 2 to populate Column B of Sheet 1.
File attached.
Not sure which formula to use. I tried CountIF but didn't work with 2 sheets.
I have a list of line items and I want to be able to see how many duplicates in Column A and B.
Column A has text field and column B is a numeric field
I thought I could use INDEX MATCH but I'm unsure.
I have a combo box (from the Control Toolbox toolbar). I like this to be populated with the contents of column A. however, in column A there can be duplicates. I obviously don't wan't any duplicates in the combobox.
View 9 Replies View RelatedI would like to populate the captions of checkboxes in a userform with the items listed in a drop down menu located in cell A1. Lets just say I don't know exactly how many items in the dropdown there will be, but I do have an estimate number. Maybe between 20 and 25.
View 9 Replies View RelatedI have attached a sample of what im trying to do here.
A2:A10 i have items, B2:B10 they can selected "yes" or "no" and C2:C10 the values
What I would like is, is "yes" was selected, i would like the item name added to a list. so basically:
=IF(A2:A10="YES",A2:A10)
And then I can just add the value to each item later but I need to remove duplicates and obv have this carried throughout the cells.
Attached File: TEST.xlsx
I need to add items to a combobox without adding duplicates or empty data. I am able to add without empty data but how to ignore the duplicates.
Here is what I have...
Code:
Dim GL As Range
Dim ws1 As Worksheet
Set ws1 = Worksheets("Main")
For Each GL In ws1.Range("MainGL")
If IsEmpty(GL) Then
'do nothing
Else
ComboBox2.AddItem GL.Value
End If
Next GL
I have 2 huge lists. One is " the Master list" which I have to extract items that are not already listed on the second list . I don't want to remove duplicate entries,I want to remove the duplicates completely. in both lists, so that I only have items that are not in the second list...
like this..
List 1:
# $ % & * ! @
List 2:
# & @
so I want to end up with:
$ % * !
Hi all. I need to create a dropdown list that can handle more than the standard eight rows that data validation allows. My list requires 75 different items in the dropdown. Is there any way that I can do this?
View 14 Replies View RelatedI am trying to take selected items from a listbox and put the selected items into an array. Basically I am trying to put the selected items into a variable that I can pass to other modules. I am close but something is off. I can't tell if it's the variable declaration or the code.
I get Run Time error 91. Object variable or with block variable not set
Here's what I have so far...
[Code] ......
Populate Adv Filter Criteria from Inputbox with valid data
I've set up a macro to extract 3 different sets of data using Advanced Filter (same data range, different criteria & extract ranges)
There are multiple options (different individual dates) to satisfy the criteria (a date) for each of the 3 extracts and I want the user to select the criteria (a specific date) from the range of unique values in the data range upon which the Advanced Filter criteria is going to be applied. (A bit like the effect provided by Autofilter)
My initial attempt was to capture the criteria date from the user and populate a cell, and then have a vlookup function in another cell check if that crieteria value exists in the specified range. I then ran a loop in the VBA code until the value is valid (ie. exists in the range). However, to streamline this I was hoping to allow the user to see a list of the valid (available) dates when they respond to my Inputbox request for the criteria.
I have an excel document that looks like this: Capture.JPG
I need it to look like this: Capture2.JPG
As you can see, the batch #, document #, amount, debit and credit all duplicate based on the number of debits that appear for each document #.
Is it possible to scan through column A for duplicates if found delete the row that has not got any data in either column D E or F? If Duplicates are found and neither have any data in D E or F Delete all but one of the duplicates.
View 8 Replies View RelatedI have a sheet that looks like this.
JOE D.02082008/28/199 H PAnnual Increase06/05/2006
JOE D.02082008/28/1995 H PReclassification06/11/2007
JOE D.02082008/28/1995 H PReclassification02/11/2008
The name is in Column F the employee Number is the 020820 and we want to only have the latest date in the last column.
So out of this data above. The bottom one with the 2/11/2008 is the one we want to keep.
And delete those other 2.
The next group has duplicate names 10 of them. But only want to keep the most recent.