I would like to do a find in a column for “yes,” and if it is True I want it to cut the row where it was found as well as the one above it to Sheet2. I need it to loop through the sheet appending to the ones that were found previously in Sheet2.
View 9 RepliesI am trying to develop a macro in excel that CUTS AND PASTES rows of data from one worksheet in to the next available row in a new worksheet if there is a date in a particular cell. If the cells that are being checked for a date are empty, then the routine would skip these rows of data.
Here is an example of the worksheet. All rows containing a date in the Scanned column, would be cut and pasted in to a new worksheet. And any rows that have an empty cell in the Scanned column are ignored. If the Scanned column is filled at a later date, then when the macro is run, the data in that row would be cut and pasted in to the next available row in the new worksheet.
TasksNameIDRespPhaseDueScannedImportedSamLLLLO119/04/201003/04/2010KM12/02/2010BMJoe123DH1JOD12/02/2010BMAnn456WS117/03/201003/03/2010JOD12/02/2010BMJohn789DH401/03/201015/02/2010JOD12/02/2010BM
In column A I have the age of a sale i have completed (compared against todays date) and from B - N of the same row i have the data that coresponds to the sale. As Column A changes daily by 1 i would like to only keep the rows whereby column A is between 1 - 10. For any that are above 10 I would like to cut and paste to a second sheet, strangely entitled "older than 10 days" !
as there are formulas after column N which calculates the data i would only like to cut columns B - N of the specific row.
I think I need to create a macro that first sorts column A so I have the oldest data at the top and then a loop to check if these are above 10, i then want to cut from B - N and paste into another sheet.
I have to look through an entire table and find certain criteria (eg. "STEVE'S PIZZA SHOP"). It might be in columns G or H, or it could also be in Columns C or something of that nature. What I'd like to do is search through the table, find each instance of said criteria and cut each row the criteria apperas in to a different sheet. I'd like to do this as a macro, so I can set it up for other criteria as well. In addition, if I can include in the macro a way to create a header row (which I'm pretty confident I can myself), as well as change the title of the sheet the information is moved to. I have looked up Do-While loops, For-Next loops, If-Then loops. I am at a total loss.
View 9 Replies View RelatedLike say I have a column which begins with an indeterminate number of blank cells before there is an indeterminate number of cells with numbers or blanks in them. I need to leave the beginning blanks alone, and perform a sort on all of the rows below. How to code up a macro to do this, but I don't know jack about that, so I was wondering if there is some kind of function or conditional sorting I could record as a macro?
View 2 Replies View RelatedWhenever you insert / delete row or cut cells out in Mon/Tue sheets it's causing issues in the table in the Weekly view tab.
Is there any way to prevent it? I don't mind redoing whole spreadsheet, it was done ages ago in a very fast manner.
I gave you an idea by deleting a row range in Mon tab which causes #REF error.
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....
I have some files on disk where I need to copy a part of the file name to make a search in our database. The files are PDF. They can have a long name of short. The only thing that does not change is the last part.
The last part ends like this:
1234_vw golf_Es_1234567_20140321.pdf
I'm interested in the part in red to be taken out and put in a cell to the right of the file name.
I used the below code that I found googling. Now I just to cut the part out in red to be able use it in my search in a easier way.
[Code] .....
I have seen a worksheet/workbook in the past that only contains (for example) Columns A:H and Rows 1:150. The rest of the columns and rows do not show. Unfortunately I cannot find the example I was looking at and I cannot find any information on how to achieve it.
View 3 Replies View RelatedI have some values in column A which looks like those in table which is shown down bellow. I have somewhere in the middle of that column one empty cell. Of course i have empty cells after the last value. I want formulas or macro or anything which will cut that column in that empty cell and all cells bellow the empty one put in column B from A1, and all cells above the empty one put in column C from A1. I tried everything but i have problem because i dont know how to eliminate empty cells bellow the last cell with value.
ABC
117
228
339
44
55
7
8
9
I have info displayed like this in cell c3
Bat 6Fm C6Hc 1K
Asc 8Gd C13yG1 198K
Chs 10GS C13yG3 34K
What I want is in cell J3 to return the first 3 letters and the numbers next to them three letters so in the example above it would return
Bat 6
Asc 8
Chs 10
I've inherited this monster of a spreadsheet that is consistently being added to and updated. Everyweek a new column is added and data entered. When one row is done, it gets cut and pasted to the Inactive sheet; however, the problem I am encountering if that the rows all have different amounts of columns, depending on when they were added and how long the items were on the sheet.
For example:
A
B
C
D
E
F
G
H
I
[code]....
So when I go to move row 1, when it becomes inactive, to the Inactive sheet, I have 8 columns of data that I need to cut and paste to make it line up with that sheet, which goes monthly. Is there any way to automatically cut out the empty columns of data for each row so that it can be condensed, rather then going through each one?
I've set up a spreadsheet structure at work which is three workbooks linked together.
I created this initially within My documents saved locally to my machine. Now though, I need to move the folder containing these workbooks onto the server to be accessed by others. My problem is that when cutting and pasting the folder, the formulas within the three spreadsheets still refer to their original location within My Documents rather than following the folder to their new location.
I'm pulling data from my servers (alarms) and have roughly 10 alarm points, reporting 9000 alarms. I've been able to pull them off the server on an excel file, have been able to sort them, but would like to venture into the hope that there is some sort of formula that would take the duplicate alarms(cell a1-a9000), delete them, and report how many duplicates were removed from the list in cell b1-b10
xyz
xyz
xyz
xyz
123
123
zzz
---
somehow it could be turned into
"xyz 4"
"123 2"
"zzz 1"
AS you can see in the attached file, I have several collumns of data going form 2012 to 1992. I would like to know the quickest way to invert this so the data is presented 1992 to 2012.
View 5 Replies View RelatedI am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
I am baffled because one worksheet I can cut/paste and none of the reference cells whether they are dependents or precedents change--in other words, all formulas remain exactly the same. I switch over to another tab in my back-end and the formulas change when cutting/pasting cells.
View 1 Replies View RelatedI just spend 30min dealing with this stupid Cells.Find function and still cannot get any results.
Could someone please tell me how to search for the text (is displayed via formula on my active sheet) named "lonstaying" and then select this cell as my activecell? (there is only one cell with this word)
I want to set the RowHeight for the row containing that cell and the row afterwards to 15px.
Is there any way to create a script or macro to "find" a number from column A that is in column B, then select it that row? Then it willl repeat that process with the next number in column A until the end....
View 14 Replies View RelatedI have a sheet with dates on it, when i open my userform and select a date i want it to go to the sheet and look for a match on the date and select the cell where the match is. There will never be 2 dates that's the same. I have attached an example.
View 2 Replies View RelatedAttempting to hide columns (of cities) via VBA generates an error when that same city is reselected (either individually, or as part of the group) in the list box, upon clicking the 'Hide' button.
The error happens at this point: ...
I've got two listboxes
Listbox1 has
A
B
C
D
E
Listbox2 has
1
2
3
4
5
6
7
8
9
10
If someone clicks "A" in listbox1, I want to select "1" & "4" in listbox2.
If someone clicks "B" in listbox1, I want to select "2" & "3" in listbox2.
etc.
how does one go about finding a specific valuein a worksheet, then selecting the value in the next column, then pasting the value in a different worksheet?
For example, I want to find a particular person's name in a worksheet, upon finding the name, I want to select the number associated with the person which is in the column to the left of the name. I then want to copy and paste the number in a different worksheet.
I am trying to work out how to select a range from a formula.
One formula works out when a specific number in a list of rows is reached, and returns the number of values it counted before it reached the number.
MATCH(TRUE,INDEX($A$2:$A$50>=B1,0),0)
With the figure returned from that can I then select the range from the first row, to the number of rows counted. And with that selection find the highest number within that range, specifying the highest number as the result?
I am having issues with a VBA script. The Spreadsheet is linked to a SQL DB and updated with data from scripts that are executing throughout the day. This is then fed to a dashboard. We have a Baseline that shows in the Date column as 0/0 and 1/1. I need a way to ensure that the 1/1 is always in the last row of the chart so the baseline shows across the entire range of dates. The current method is to declare a variable and add 1 to it whenever we iterate through the sort for the other dates. However everyday the 1/1 baseline column ends up further to the beginning until it is next to the 0/0 in position 2.
So I am trying to find a way to have the macros find the last row of the Date field and then set the position to be equal to the last row.
I want to know how to find certain String and select the cell it on finding the String.
View 10 Replies View RelatedI am trying to find a table of text, and copy it to another worksheet. I want to copy it as a range, not as rows or columns. Using Find, I can get to the 1st row of the table. Using Find again, I can get to the last row of the table.
What I don’t know how to do next is select the range.
For example; The table is in cells A10:F20. “Start” is in cell A10, and “End” is in cell A20.
Starting from cell A1, how do I find and select the range A10:F20.?
I will be doing this twice in the same macro, as there are 2 tables. Each of the 2 tables has the same “Start” and “End” text, as described above. The 2 tables will not always be located in the same location within the original WkSht.
I am trying to achieve something like this :
Find a specific text in my column B (example : "Proposal ID"), when "Proposal ID" is found, select this cell and offset to the column C (Offset(0, 1)). Then copy this cell value in another sheet.
This will be repeated with different texts (always in the column B), so if the text is not found, I need the macro to continue running.
When recording a macro, how would I have it record me searching for a word in a cell, then select the two rows beneath it so that I can hide/unhide the hidden rows?
The reason it has to search for the word in the cell is that with changes above, the rows keep getting bumped further and further down (i.e., a moving target).
how i can go about finding the next empty row (and select the first cell of that row (column A))? edit: It probably should be noted that there are cells in Columns A through P. There are rows where all and/or just one cell contains data per row. So i cannot use a " lookup" based on a single column.
View 2 Replies View Related