I have seen a worksheet/workbook in the past that only contains (for example) Columns A:H and Rows 1:150. The rest of the columns and rows do not show. Unfortunately I cannot find the example I was looking at and I cannot find any information on how to achieve it.
View 3 Repliescode to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range
[Code]....
I am trying to develop a macro in excel that CUTS AND PASTES rows of data from one worksheet in to the next available row in a new worksheet if there is a date in a particular cell. If the cells that are being checked for a date are empty, then the routine would skip these rows of data.
Here is an example of the worksheet. All rows containing a date in the Scanned column, would be cut and pasted in to a new worksheet. And any rows that have an empty cell in the Scanned column are ignored. If the Scanned column is filled at a later date, then when the macro is run, the data in that row would be cut and pasted in to the next available row in the new worksheet.
TasksNameIDRespPhaseDueScannedImportedSamLLLLO119/04/201003/04/2010KM12/02/2010BMJoe123DH1JOD12/02/2010BMAnn456WS117/03/201003/03/2010JOD12/02/2010BMJohn789DH401/03/201015/02/2010JOD12/02/2010BM
In column A I have the age of a sale i have completed (compared against todays date) and from B - N of the same row i have the data that coresponds to the sale. As Column A changes daily by 1 i would like to only keep the rows whereby column A is between 1 - 10. For any that are above 10 I would like to cut and paste to a second sheet, strangely entitled "older than 10 days" !
as there are formulas after column N which calculates the data i would only like to cut columns B - N of the specific row.
I think I need to create a macro that first sorts column A so I have the oldest data at the top and then a loop to check if these are above 10, i then want to cut from B - N and paste into another sheet.
I had a data sheet that used about 20,000 rows, down to AF20000 or so. I deleted about 16,000 rows and now want to reduce the size of the worksheet so that when I hit Control+Shift+End, it takes me only to AF4000, not to AF20000. Can this be done without replicating into a new worksheet?
View 4 Replies View Relatedsome spreadsheets i open dont have 65536 rows , they only a 100 or 200 its seems the worksheets have been cut down. how can i do this based on the last row in the e coloum.
Ie last entry in the e coloumn is 500 the worksheet to only be that big
whats the correct syntax for Font Size as a Label property? I am attempting to change the font size of all Labels on a particular sheet via vb
View 9 Replies View RelatedI have a rather large spreadsheet that takes a long time to calculate. One sheet has the data (about 2800 rows by 650 columns), with samples in rows and data for each sample in the columns. A second sheet has functions to group the data according to predefined patterns. That second spreadsheet is about 800 columns wide and as many rows as I need it to be, as the samples don't need to be analyzed all at once.
Ideally I would like to do all samples at once by making the second spreadsheet 2800 rows high, but the calculation time is just way too long. And there's the problem. The calculation time seems to increase exponentially with the number of rows I calculate at a time. I ran a few tests making it different sizes, and here are the results:
rows
time(seconds)
100
3.5
150
12
200
23
[Code]...
I tried both HLOOKUP and INDEX/MATCH functions and it didn't make a lot of difference. These numbers are for INDEX/MATCH.
Graphing these numbers show that it follows an exponential curve pretty closely. What is interesting is that the progress indicator at the bottom of the screen finishes in a few seconds, about 5 seconds for 350 rows, and I can see the new data after those few seconds. But then it sits and appears to do nothing for the rest of the time. So, for 350 rows, it looks to be done with the calculations within 5 seconds, but then it freezes for another 2 minutes with CPU usage maxed out before I can do anything with the program. That actual calculation time seems to scale linearly with the number of rows I calculate, but the time after it finishes calculating before it finishes whatever else it's doing scales exponentially.
The spreadsheet does have a macro and a couple of other sheets and a macro that do some later analysis and I wondered if that had something to do with it. To check that, I created a new spreadsheet and set it up the same as the original one, with the data in one spreadsheet and the INDEX/MATCH formulas in the other. I copied the data over, but setup the formulas new without copying/pasting anything. It didn't make any real difference.
I have used Option Buttons and Combo Boxes on my worksheet. When I print my worksheet, the controls which contain values do not print properly. They only print a fraction of their actual size relative to the rest of the worksheet. The properties are set so that they are printable. What setting do I need to change for them to print properly.
View 2 Replies View RelatedI would like to know if it is possible with VBA in Excel 2007 to select objects based on size (or above a certain size).
I would like to select all the picture objects but not the small checkboxes on my worksheet.
I know that I can select the items one by one with home -> find/select -> select object but how I could make this "find/select" conditional.
I have some files on disk where I need to copy a part of the file name to make a search in our database. The files are PDF. They can have a long name of short. The only thing that does not change is the last part.
The last part ends like this:
1234_vw golf_Es_1234567_20140321.pdf
I'm interested in the part in red to be taken out and put in a cell to the right of the file name.
I used the below code that I found googling. Now I just to cut the part out in red to be able use it in my search in a easier way.
[Code] .....
I have some values in column A which looks like those in table which is shown down bellow. I have somewhere in the middle of that column one empty cell. Of course i have empty cells after the last value. I want formulas or macro or anything which will cut that column in that empty cell and all cells bellow the empty one put in column B from A1, and all cells above the empty one put in column C from A1. I tried everything but i have problem because i dont know how to eliminate empty cells bellow the last cell with value.
ABC
117
228
339
44
55
7
8
9
I have info displayed like this in cell c3
Bat 6Fm C6Hc 1K
Asc 8Gd C13yG1 198K
Chs 10GS C13yG3 34K
What I want is in cell J3 to return the first 3 letters and the numbers next to them three letters so in the example above it would return
Bat 6
Asc 8
Chs 10
I've inherited this monster of a spreadsheet that is consistently being added to and updated. Everyweek a new column is added and data entered. When one row is done, it gets cut and pasted to the Inactive sheet; however, the problem I am encountering if that the rows all have different amounts of columns, depending on when they were added and how long the items were on the sheet.
For example:
A
B
C
D
E
F
G
H
I
[code]....
So when I go to move row 1, when it becomes inactive, to the Inactive sheet, I have 8 columns of data that I need to cut and paste to make it line up with that sheet, which goes monthly. Is there any way to automatically cut out the empty columns of data for each row so that it can be condensed, rather then going through each one?
I would like to do a find in a column for “yes,” and if it is True I want it to cut the row where it was found as well as the one above it to Sheet2. I need it to loop through the sheet appending to the ones that were found previously in Sheet2.
View 9 Replies View RelatedI've set up a spreadsheet structure at work which is three workbooks linked together.
I created this initially within My documents saved locally to my machine. Now though, I need to move the folder containing these workbooks onto the server to be accessed by others. My problem is that when cutting and pasting the folder, the formulas within the three spreadsheets still refer to their original location within My Documents rather than following the folder to their new location.
I'm pulling data from my servers (alarms) and have roughly 10 alarm points, reporting 9000 alarms. I've been able to pull them off the server on an excel file, have been able to sort them, but would like to venture into the hope that there is some sort of formula that would take the duplicate alarms(cell a1-a9000), delete them, and report how many duplicates were removed from the list in cell b1-b10
xyz
xyz
xyz
xyz
123
123
zzz
---
somehow it could be turned into
"xyz 4"
"123 2"
"zzz 1"
AS you can see in the attached file, I have several collumns of data going form 2012 to 1992. I would like to know the quickest way to invert this so the data is presented 1992 to 2012.
View 5 Replies View RelatedI am trying to cut all rows with the date less than 2 days older than the current date. Cut and paste it into a new worksheet in same workbook and save it into a specific folder.
[Code] ....
I am getting an error on the line :
[Code] .....
Saying Object doesn't support this property or method.
I am baffled because one worksheet I can cut/paste and none of the reference cells whether they are dependents or precedents change--in other words, all formulas remain exactly the same. I switch over to another tab in my back-end and the formulas change when cutting/pasting cells.
View 1 Replies View RelatedI have to look through an entire table and find certain criteria (eg. "STEVE'S PIZZA SHOP"). It might be in columns G or H, or it could also be in Columns C or something of that nature. What I'd like to do is search through the table, find each instance of said criteria and cut each row the criteria apperas in to a different sheet. I'd like to do this as a macro, so I can set it up for other criteria as well. In addition, if I can include in the macro a way to create a header row (which I'm pretty confident I can myself), as well as change the title of the sheet the information is moved to. I have looked up Do-While loops, For-Next loops, If-Then loops. I am at a total loss.
View 9 Replies View RelatedI have a problem where I extended a formula down to over 40,000 records which has increased the file size substantially. I only need it to scroll down to a few thousand rows now that I realized that there is alot less data to populate the worksheet. Is there any way to get it back to a scroll range that is more modest in size?
View 1 Replies View RelatedWhenever you insert / delete row or cut cells out in Mon/Tue sheets it's causing issues in the table in the Weekly view tab.
Is there any way to prevent it? I don't mind redoing whole spreadsheet, it was done ages ago in a very fast manner.
I gave you an idea by deleting a row range in Mon tab which causes #REF error.
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedI am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
Excel Q.xlsx‎
I have an Excel 2007 workbook with several sheets, and various cells in several of the sheets have column headers with a description in the same cell enclosed in curly brackets, e.g. Header{Description}. I would like to to keep the column headers in their respective cells, but move (cut) the descriptions along with the brackets to the respective cell comments.
View 1 Replies View Relatedwhat size monitor do you use?
I'm thinking about upgrading my 17" to a 23" monitor so I can see more cells without zooming
Anyone currently use a 23" for Excel?
I'm looking for a way to use VBA to set the window size upon opening the workbook. When the document opens, there should be two windows, each taking up half the screen and each on a particular tab.
Currently, if I save the workbook with the window settings I want, when I open it, both windows are maximized. When I hit the restore button, they go back the settings with which they were saved, which is what I want it to look like as soon as it's opened. Also, a bonus would be for the code to determine the screen size, so it can fill the screen no matter what monitor/computer it's opened on.
I am having some problems with some charts that are being created via VBA.
If I create the chart at 1600 x 1200 screen resolution at 100% zoom then my chart is fine but if I am at a different level of zoom or a different screen resolution the code for position the top and left and width and height of the plot area does not work as expected.
I have the outside of the chart set at 600 wide by 600 tall and no matter what resolution i'm in it seems that it always stays this way. I just seems the plot area and the legend move around.
I am working on a Listview. Every time I open the file, the ListView doesn't appear to be of the same size I intend it to be. Although I kept the size of the ListView big enough to show all my data, the ListView still goes back to much smaller size.