Delete Row If Two Corresponding Cells Match
Jul 25, 2007I am trying to make a VBA code that will delete an entire row if two cells match. An example would be if F4 and G4 are equal then delete row 4.
View 5 Replies
ADVERTISEMENT
Search A Sheet For A Match And Then Copy All The Cells To The Right Of The Match
Jul 13, 2009I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedIf Two Cells Contain Specific Text - Match Or No Match
Jul 10, 2013I am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
Match Cells & Shift Rows Down If No Match
Dec 7, 2006Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
Delete Entire Row If Value Match?
Dec 11, 2012 I written one code to delete Entirerow if value match. It's working fine .the code delete all match except one match.!
-------------------------------------------------
Option Compare Text
Sub delete_duplicate()
Cells(Rows.Count, 1).End(xlUp).Select
Range(ActiveCell, Range("A1")).Select
For Each cell In Selection
If cell.Value = "Already updated" Then
cell.EntireRow.Delete
End If
Next
End Sub
-----------------------------------
Delete Rows Where The Numbers Don't Match?
Mar 3, 2014column "b" in the attached file has numbers that match some numbers in column "c" I need to delete all the rows that done match the numbers in column "c" that are used in column "b"
for example no " 53" is in column "c" but not column "b" so they need deleting
Delete Rows That Match Criteria
Feb 2, 2009I would like a macro that scrolls through each row and deletes it if it contains the word "Account" in column B.
View 5 Replies View RelatedHow To Delete A Row Based On Partial Match In Column
Jul 19, 2013I am using VBA
I have an input box pop up to ask the user for a base item number. The way the excel sheets part numbers work for example is TM-T88VP-GRY, the last part 'GRY' changing based on the variation of the item that someone ordered. So, the base item number would be TM-T88VP, and what I want to do is search through a set column (Column G) and delete any row that contains that base item number.
How To Delete Multiple Rows But That Match In Columns
May 22, 2014ertret.jpg
I am trying to delete rows that contain the same addresses BASED ON COLUMNS.
Do you see how in columns C and D they all match EXCEPT for row 4? How do I delete allllll the rows that when c and d match.
I want to keep the ones that DO NOT MATCH.
P.S I HAVE 4000 ROWS I WOULD HAVE TO GO THROUGH
Find A Match From Sheet1 In Sheet2 And Delete
Jun 12, 2014Any way to do the following macro. I am trying to search column A on Sheet 1 and see if it finds the match on Sheet 2. If it finds the match it will delete the row on Sheet 2 and move all the information up and then move onto the next value in Column A in Sheet 1.
TestSheet.xlsx
VBA Delete Duplicate Rows If Entire Row Is A Match
Feb 25, 2014I'm trying to put together a script which on the sheet "Resource" compares every cell in the range B:U, starting at row 8, and where all cells match, keep the first row, but delete the duplicate proceeding rows.
I've found the code below here: [URL] ...., which I thought I may be able to adapt, but for me to include all the columns in the 'If.Evaluate' section of code seems to perhaps not the most efficient way of doing this.
[Code] ......
Delete Rows That Dont Match Criteria
Jun 19, 2007I have a file which has some data I want to keep and some data I want to strip out.
The data I want to keep will always have either a date or a string “Overdue” or a string “> 1 year” in the first column, anything else I want to remove.
Example file shown below
23-Apr-0812341234123412341234
30-Apr-0812341234123412341234
19-May-0812341234123412341234
27-May-0812341234123412341234
> 1 year12341234123412341234
Overdue12341234123412341234
Comparing Two Columns And Want To Delete Row, Dont Match
Jun 25, 2007Application.ScreenUpdating = False
Range("B:B").Select
For Each c In Selection
If c.Value = Range("A4") Then c.Rows.Interior.ColorIndex = 36
Application.ScreenUpdating = True
I got this code so far that highligts the rows that match but range a4 needs to go down the column to a5, a6, a7....so it only checks the first cell in column a. I need it check all cells. Then i was going to delete the entire row in column B where it was not highlighted.
Checking Date If Match Then Copy And Delete
Apr 11, 2007I have been trying to write a script that when a workbook is opened it promts you if you want to archrive old data.
If the use selects yes the script will run and checks all dates in column AG8:AG60 on status worksheet if it matches that criteria(older than 30days from today, and it is underlined) then it copys and paste all the data in that row from "A" to " AI" to the next available row in the archive sheet in the same workbook.
This is what I have but since i dont quite understand VB that well i cant find where my mistake is.
Private Sub Workbook_Open()
Dim iReply As Integer
iReply = MsgBox(Prompt:="Do you wish to archive old Data now?", _
Buttons:=vbYesNo, Title:="Remove Old Data")
If iReply = vbYes Then
MsgBox "I will know run chkdates"
Run "ChkDates()"
ElseIf iReply = vbNo Then
Exit Sub
Else
Exit Sub
End If
End Sub ............................
Delete Rows Based On Partial Match
Aug 11, 2007I currently have a speadsheet that looks similar to the following:
REF DATA1 DATA2
SVRW_67 784598 475395u
SVRW_34 fdsjsjdf 734978
CAT_56 ghdrhad gaghadh
CAT_67 48578 8943539
I'm trying to create a macro that will delete all rows with "CAT" in the REF column.
I've searched this site and struggled trying to adapt other methods listed and got nowhere.
Delete Columns / Rows By Partial Match
Feb 19, 2008i would like to find code for a macro(s) to delete selected columns and delete row by partial string..
due to my novice excel skills i would prefer in two separate macros so i can trigger from another macro if poss..
Match & Delete (find And Remove Identical Rows)
Feb 24, 2009I have over 2000 rows with 20 columns and i need to find and remove identical rows. I can do a match with MATCH() by concatenating the columns and comparing them as a whole but i need to apply this to the whole table and i need it to remove all the duplicate rows it finds.
View 5 Replies View RelatedFormula To Delete Column If It Doesn't Match Criteria
Jun 2, 2009I have a column of cells (Column I2:I1063) with zip codes in it and I want to keep the row if the zip code matches one on the list in a column B2:B100 on a separate sheet (Sheet1).
View 4 Replies View RelatedDelete Rows If Column Has Fewer Than X Matches To Part String Match
May 5, 2008I have data sets on multiple worksheets within a workbook (over 70). Based on the begining of a string, I need to count all instances with that begining, and if there are fewer than 12 instances, delete the entire row.
Data set example:
In this example, I need to count each instance of rows starting with 1/* - 9/*, and delete rows as mentioned. In other data sets the string might start Gi1/*, and so on. In the following code, if I do not loop, and only test against 1 value type, and ONLY run it once, it works. As soone as I try to loop through all possibilities, or run the macro a second time, it blanks out the entire worksheet, starting at row 3.
Dim c As Long
c = Worksheets(i).Range("A" & Rows.Count).End(xlUp).Row
With Range("A3:A" & c)
If Application.WorksheetFunction.CountIf(Worksheets(i).Columns(1), "1/*") < 12 Then
. AutoFilter field:=1, Criteria1:="1/*"
.Offset(1).Resize(.Rows.Count - 1, 1).EntireRow.Delete
.AutoFilter
I have also tried to concatenate a variable with my CountIf criteria, but that fails miserably.
Increase Speed Of Macro: Match In Font Color It Will Fill The Top With Orange And Delete The Bottom
Dec 12, 2006My macro works fine but I'm interested in seeing if I can speed it up. What I'm doing is starting at the bottom and comparing it with the row above and if they match in font color it will fill the top with orange and delete the bottom. This works but usually takes several minutes.
Public Sub ADMINCompareList()
Dim varTest1, varTest2
Dim lng As Long, i As Integer, iTest As Integer
Application. ScreenUpdating = False
Worksheets("ADMIN").Activate
For lng = ActiveSheet.UsedRange.Rows.Count To 2 Step -1
If Not Range("M" & lng).Font.Color <> Range("M" & lng - 1).Font.Color Then
Goto newrow
End If
varTest1 = Intersect(Range("J:W"), Rows(lng))
varTest2 = Intersect(Range("J:W"), Rows(lng - 1))
For i = 1 To 14....................................
Count Number Of Blank Cells In Range Starting And Ending Will Cells That Match String Values
May 13, 2013I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
2 Cells Match Count A Load Of Cells
Oct 3, 2013Basically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1
Mon/02/09/13
Tue/03/09/13
Wed/04/09/13
Thu/05/09/13
Fri/06/09/13
Weekly Total
[Code] .......
Highlight Cells If Match Another Sheet Cells
Dec 6, 2006I have a lottery pool in sheet 1 in which i have the names of the people and their number picks. In sheet 2 i have the lottery results.
All i want is to be able to highlite(adding a backround color in the cell) to the matching numbers in sheet 1.
Macro To Find Match Delete It From The Cell Display It In Different Cell
Apr 23, 2008I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies View RelatedMatch Cells In One Column To Cells In Another
Sep 10, 2007I want to try and create a macro that will start with the value in the first cell of one column and find it another column and highlight both itself and the other value and then move onto the next value in the cell below and repeat the same process until it reaches the end of the column. This would result in leaving unhighlighted cells as new items as it were that did not exist before.
View 2 Replies View RelatedFind And Match: Delete Any Row On The Old Side That Is Not Contained On The New Side
Jun 3, 2009i have 2 excel worksheets. One of them contains over 20,000 rows of entries (old side) and the other contains about 900 rows of entries (new side). Both contain the same 9 column headings. I've shortened the list in my workbook example.
What i need to do is excel to delete any row on the old side that is not contained on the new side. I don't need the rows to match fully but the column A's (Doc number) are what i want it to check against. I've included a summarised version of the database and the old and new are separated by a heavy blue line. Need to be left with the same rows on either side of that blue line at the end.
Find And Match The Data In Column In A With Column B And Delete Both
Mar 28, 2014I need to find the data in the sheet SKU & match it to the data in import_215 column F if it matches then delete the entire row (see Attachment SKU3)
View 12 Replies View RelatedDelete Multiple Rows :: Match In Multiple Columns
Oct 29, 2008I need to find all rows that have columns that match in all 3 of the columns.
I then need to delete all but the last row in each "group" of rows.
like:
1 q w e
2 q w r
3 q w r
4 q w r
Delete rows 2+3
Add If 4 Cells Don't Match
Nov 23, 2009I have four columns of data that I'd like to compare. If none of the cells match, then I'd like to add all the cells together. If all the cells are different, then I'd like the number to match the others. Here's the problem: if two or three cells match, but the others are different, I'd like to take one of the matching cells and add it with the cell(s) that does not match.
Examples (each number is a cell):
1 2 3 4 = 10
1 1 2 3 = 6
1 1 1 2 = 3
1 1 1 1 = 1
Match Cells?
Aug 5, 2006I'm looking through the threads and found an interesting line of code (IMO anyay)
copy row of data if match is found in other worksheet.
v = Application.Match( Cells(i, 2), r, 0)
Why is that when I type 'application.' match doesn't appear using intellisense?