I'm looking through the threads and found an interesting line of code (IMO anyay)
copy row of data if match is found in other worksheet.
v = Application.Match( Cells(i, 2), r, 0)
Why is that when I type 'application.' match doesn't appear using intellisense?
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies View RelatedI am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
Basically i need to work out if a3 matches one of the dates in column 1:1 i need it to calculate and give me the sum for the weekly total of b3, d3, f3, h3, j3, l3 and so on if column a4 matches one of the dates in column 1:1
Mon/02/09/13
Tue/03/09/13
Wed/04/09/13
Thu/05/09/13
Fri/06/09/13
Weekly Total
[Code] .......
I have a lottery pool in sheet 1 in which i have the names of the people and their number picks. In sheet 2 i have the lottery results.
All i want is to be able to highlite(adding a backround color in the cell) to the matching numbers in sheet 1.
I want to try and create a macro that will start with the value in the first cell of one column and find it another column and highlight both itself and the other value and then move onto the next value in the cell below and repeat the same process until it reaches the end of the column. This would result in leaving unhighlighted cells as new items as it were that did not exist before.
View 2 Replies View RelatedI have four columns of data that I'd like to compare. If none of the cells match, then I'd like to add all the cells together. If all the cells are different, then I'd like the number to match the others. Here's the problem: if two or three cells match, but the others are different, I'd like to take one of the matching cells and add it with the cell(s) that does not match.
Examples (each number is a cell):
1 2 3 4 = 10
1 1 2 3 = 6
1 1 1 2 = 3
1 1 1 1 = 1
I have a list of account numbers is row A. If the numbers match I want to go to column D and sum the total. I have searched the forum and can't find anything formulas specific to add a column when the criteria change (in column A). Is this possible in VB.
I am trying to find a way to match formulas from two cells (not the value but the formula). I am creating a smaller excel test where they can enter a formula (C3) and directly see if it matches the correct answer (F3) All I have found is formulas containing value comparison.
View 4 Replies View RelatedI have 2 sheets of data one for data the second for input and calculations.
SHEET 1 (Data)
HEADINGS - FROM / NUMBER
A / 81
C / 99
E / 01
SHEET 2 (Input & Calculations)HEADINGS - FROM / TO / FROM val / TO val
I want to be able to stick "A" in Col1 (FROM) and the number 81 to automatically appear in Col3 (FROM Val). I am unabel to use LOOKUP as my Pocket PC doesen't recognise it.. VLOOKUP and HLOOKUP are ok though, I just can't seem to get them to work for me.
In this workbook Test1.xlsm my active cell (in this case) is "E2" and i am trying to insert the word "INVOICE" in cell "E2" using a macro. Now, the adjacent cell to the left is "D2", i would like that for every cell in column "D" that matches cell "D2" to also have the word "INVOICE" inserted in its adjacent cell under column "E".
[Code] .....
i currently have a spreadsheet that uses vlookup and match to identify data that matches 2 criteria.
so there is a table with names on the left and dates on the top, and the dates change over time. this reference another table with the data for the names at all dates. therefore, the formula does is a vlookup with a match inside it.
this works well.
so say today is Jan 1.
Columns 1, 2 and 3 are Jan 1, Feb 1, March 1
On Feb 1, columns 1, 2, and 3 are Feb 1, March 1, April 1
in column 4, i want it to equal the sum of the data for all dates beyond the date in column 3.
does this make sense?
i attached a small sheet i was working on to play around with these functions. in the sheet i just used numbers (1,2,3) instead of the dates for simplicity
I'm trying find a way when running a report that continues to grow weekly - to either run with a script or a specific formula. There's certain cells that I'm trying to capture but the main thing is it's very time consuming and is tracked onto a separate workbook. Here's what I'm looking for a hand on:
Weekly list of 20,000+ rows - includes customer information - names, addresses, phone, account #, order #, etc I sort my list by address and then look and manually count the duplicates. Once duplicates are located I enter on a separate workbook along with the most recent order number. There has to be a faster way.
So Column A has First name, Column B has Surname Column C is empty Column D has list of firstnames, Column E has list of Surnames, Column F has User ID
I want to Look at the Surname in Cell B2 see if I can find a match down Column E, if I do I want to look at the First name next to it in Column D see if that matches Cell A2 and if both match put the User Id in Column F into cell C2
This formula keeps giving me an #=N/A result and i'm not sure why
=VLOOKUP(D968:D999,E968:E999,K3,FALSE)
Cell: D968 to D999 has numbers from 100 down to 0-69
Cell: E968 to E999 has dollar amont from $8,360,000 to $450,000
Cell K3 is the numer that should match from cells: D968 to D999
and give me the dollar amount.
replace row of first cells match
replace row if 1st column match
But that's only a very small part of my question.
1. I have an original list of IP addresses which contain many duplicates.
2. I used "The Duplicate Finder" Add-in and created a unique list of IP addresses from the original list.
3. I did proprietary search on the unique IP list to get an approximate geographic location of each IP address.
Now I want to match all the IP search information to all the duplicates in the original list.
It's difficult for me to craft an exact question without knowing the proper terminology, so I'll "illustrate" a few point below.
Original List of IP addresses in a single column (IP Address)
IP address
12.34.56.78
12.34.56.78
98.76.54.32
95.62.84.37
95.62.84.37
95.62.84.37
95.62.84.37
55.11.99.225
55.11.99.225
23.56.89.14
78.56.12.43
78.56.12.43
Unique list of IP address with additional info in 3 more columns (4 columns total)
IP Address Country State City
12.34.56.78 USA CA SomeName
98.76.54.32 USA NY AnotherName
95.62.84.37 GB England Ye OldeName
55.11.99.225 MX EL SmokyCity
23.56.89.14 USA WA RainyCity
78.56.12.43 USA FL ViceCity
What I want to do is if an IP address in the original list matches the IP address in the unique list, the original IP row is replaced with the matching IP row in the unique list.
Hi, I am using this formula - SUMIF(X!$A$1:$A$107,"*"&A3&"*",X!$B$1:$B$107) in Excel to match cells on the source tab to a range of cells on the target tab X. Both ranges of cells contain place names so for example the cell A3 above on the source tab references a number of cells on the target tab X containing "Glasgow" but I need the formula to exclude any cells that contain "Glasgow Mobile" as at the moment it is adding them together. This needs to be draggable so that it will pick all place names but none containing the word "Mobile"
View 9 Replies View RelatedI am trying to match up data in two cells and then return the value in a third
Cell1 Cell2 Cell3(Return Value)
acc. pos
12345 1111 a
12345 5555 b
55555 2222 c
Match these cells to above anywhere in an array and return value in aboce cell 3 if found.
Cell1 Cell2 Return here
acc. pos
12345 1111 a
12345 7777 leave blank
I am trying to make a VBA code that will delete an entire row if two cells match. An example would be if F4 and G4 are equal then delete row 4.
View 5 Replies View RelatedMy workbook has 3 worksheets in it, Data Entry - Components – Jobs. The first worksheet contains 2 buttons to enter new data via user forms. The second worksheet has 3 columns in it, component code, date, quantity and they are populated via a user form. The third worksheet has 4 columns, component code, date, quantity and Job number and it is also populated via a user form. When a person enters the data into the job user form and then clicks the command button to add it to the spreadsheet I need it to also find the matching code in the component worksheet and subtract the job quantity from the component quantity. So if the component worksheet has Envelope1 with a quantity of 25,000 pieces and I enter a job that used 10,000 of Envelopel1 the component worksheet would be updated and only list 15,000 pieces.
View 2 Replies View RelatedIm trying to cross match two cells from two combobox's,
Allong the top there are test names, and down the side is staff names,
On a user form there are two combobox's one with staff names the other test names
Untitled.jpg
How can i make it increase the number in a cell where the name and test match the combobox's value
I have Attached an example file,
How to check for a partial match looking in one cell, A1 for example, and checking to see if the contents of B1 show a partial match (example attached).
I can't use the vlookup because I only want to look at cells specifically, not a table/list. Please also note that the attached example has no formulas.
Forum Example.xlsx‎
I have 570 records in one sheet and 330 on the other one. They are the same data and I want to match them but i have been doing so manually because in the one w/ 330 there are missing values, so I have been copying and pasting but takes too long. The 570 is complete, i took it from the census data and the 330 is not.
I want to be able to match them in the same row including missing values so I can use it in ArcGIS
I have tried to match w/ the match function but have not had luck...
I would like a formula that will take the info from 2 cells (not adjacent to each other or in the same row) and then look these up in a table giving the answer in the 3rd column somewhere else on the worksheet.
View 5 Replies View RelatedI have text values in 2 different columns A and B. I can use the conditional formula to find and highlight duplicates but only if they are an exact match. How do I modify if they are not exact match but for example start with the same 3-4 text values?
View 1 Replies View Relatedhttp://www.excelforum.com/excel-gene...-criteria.html target="_blank">Color Cells Which do not match criteria
i m having a problem similiar to the above.I tried using the nested ifs in Conditonal formatting but i m getting errors.Can anybody complete my formula
I am analyzing a quota schedule. I need to count the cells in a row until I hit a value in one of the cells in that row (lets say cell>=30). Then I want the formula to evaluate the next two cells in front of that cell to determine if either is >=30, if so then the formula counts up to the original cell. This will determine # of days out for a install or trouble call lets say.
I have messed with a combination of IF, CountIF, and Match statements and just seem to hit a dead end. Any thoughts, even if it is that I may need another approach, is welcome.
Here is some code I have tried to no avail: ....
I have a condundrum that having trouble solving hoping someone may be able to help...
I am trying to return the contents of all cells that match a value based on another cell.. I have managed to achieve with the forumla below but it only returns the first value matched.
what I wish to do is return all values in ROW E where the value in ROW B equals Deliver and combine into one cell [F1].
ie.
B E F
DELIVER VALUEW VALUEW VALUEY
COLLECT VALUEX
DELIVER VALUEY
The formula I have currently uses index but only returns the first value found. I need to find all values and place in one cell. C5 holds value 'deliver'
=IF(ISERROR(INDEX( 'Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0))),"",INDEX('Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0)))