I want to delete the rows containing a subtotal of zero and the rows above it related to that grouping.
PO numbers are assigned to the data so the grouping is on the PO number column.
The subtotal numbers are two columns over.
The workbook is close to excel's row limit so I want to eliminate the PO rows that have zeroed out. So, the row with the value of zero and the rows with the same PO number.
I have a large spreadsheet with 25 columns.
I need a macro to delete prior rows if SUBTOTAL in column K equal zero.
I have attached sample of a series of massive spreadsheets that I am working on.
Item Numbers in Column A
Flag in Column D
Values in Column P
I want put the total of the values in P for each group of item numbers in column C where the flag is YES.
Unfortuantely I prefer not to use excel's subtotal functionality or array formulaes here because of the logistics of how these are used.
I want to take a list of data and then subtotal the value by certain groups eg Toys. I then want to sort those subtotals by value descending. I then want to rank the sub totals
So basically i want to first select the group total and if that subtotal is the highest rank it. Its almost as if I need two subtotals (although Excel only gives me one)
Is it possible to separate a range of cells with numerical values into "n" groups that have equal (or as close to equal as possible) total sums?
Ex. The range A1:A30 includes 30 random numbers between 1 and 12 (obviously there are duplicates). I need excel to auto-generate 6 groups of 5 cells each with each group having the same (again, as close as possible) total sum. Preferably, I'd like the numbers in each group to be similar from top to bottom, but I'm not overly concerned about that.
I have a list of 600 figures (this may vary) but i need a formula that will look a one particular figure in this list and return if it is one of 5 equal groups. e.g in this example the lowest 125 figures in numeric order would be in group 1 up to the highest 125 figures would be in group 5.
I realise if I limit it to 4 groups then i could use the 'quartile' functions but i am stuck with 5 groups.
I need to distribute a list of data into 10 even groups of data. Here is the scenario.
I have 10 salespeople on my team with a list of accounts that need to be evenly distributed based on two criteria
- Each sales person needs to have the same number of zipcodes , with the closest TOTAL # of accounts and TOTAL $ value as possible
Any VBA code to delete rows in a subtotalled list?
The subtotal line and the associated rows should be deleted when subtotal equals zero.
Import Financial System -Recaps Trial BalanceFrom Date:31-Jul-2011,To Date:27-Aug-2011,
Requested By:Jenny Drumm,30-Aug-2011 9:28 AMAge Range: 0 - 30, No. of recaps: 231
Broker File NumberAgeVendor/Co/DeptFirstBankAssistsFRTBRODTYLoadsInvInvClaimsGL AcctTRUETRUEBalanceCostFeeRecptsAdjRecptsROE VarLC Var
[Code] ........
There are more age groups, & some groups have hundreds of lines. Each of the total line in the report has a number plugged in by the system, which, because of rounding, may be off by several cents. I figured out how to move the rows with Broker File Numer, etc & the row after it up above the first Age Range.
What I need to do next is:Delete all rows between "Age Range: ....." and the start of that range's data.Delete all blank rows between "Totals" and the next "Age Range: ...."Delete 5 rows after "Grand Total"Put a formula in the row immediately above each age range's "Totals" for each column, summing all the data for that column, in that age range. (Hopefully with the word Total in column B of that row, too)Put a formula in the row immediately above the "Totals" after "Grand Total" that adds together each of the Age Range totals.(I did figure out how to get the "Balance" cell in each row to sum that row going right to left, so at least I got a start! For that I'm using
Code:
LR = Range("C" & Rows.count).End(xlUp).Row
With Range("R10:R" & LR)
.NumberFormat = "#,##0.00_);[Red](#,##0.00)"
.HorizontalAlignment = xlRight
.VerticalAlignment = xlTop
.FormulaR1C1 = "=IF(ISNUMBER(RC3), Sum(RC5:RC17), " & Chr(34) & Chr(34) & ")"
End With
I'm trying to filter and delete everything that is less than or equal to zero and everything is text in column C (filde3).
and need to filter and delete dates are less than 10/06/2013 (DD / mm / yyyy)
Code:
Sub Mult_Filter()
[A1].Select
Selection.AutoFilter Field:=3, Criteria1:="=Prejudicado", Operator:=xlOr, _
Criteria2:="=Verificar", Operator:=xlOr ', Criteria2:="=06/10/2013"
[Code]....
The code below is an attempt to delete all rows where the cell in column A is not equal to the value of B1. B1 is text if that somehow makes a difference.
Dim n As Long, lastrow As Long
lastrow = Range("A65536").End(xlUp).Row
For n = lastrow To 1 Step -1
If Cells(n, 1) <> Range("B1") Then Cells(n, 1).EntireRow.Delete
Next n
Do I need to specify that B1 will always be the cell to reference (ie $B$1). Edit: Just had an epiphany, I also need it to stop after Row 3. I have some headers and such that I don't want removed.
I am trying to search a column for specific values.... if the cells in the column equal X, Y, or Z then I want to keep them. Anything else, should be deleted....and not just the cell the entire row that it is in.
So I'd like it to search column E for a number of different values, if equal keep the data. If not (say E6 is not any of those values) then delete that row (all of row 6)
Located in column W are amounts. if this amount is les than or equal to zero, I want to look at column A to see what account number is associated with that amount. then delete any row with that account number and also any empty row that may be directly above it.
i have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?
View 4 Replies View RelatedI have a very big range of data from B4, to a variable other end from which I would like to delete all entries equal to 0.0000 leaving just those with an entered value.
I guess it's just an if question cycling through the rows and columns? Slight complication is it's on the 3rd sheet of a Workbook, as set out in the sample file.
After this manipulation has been done, I then wish to copy the data from the range B4: end of data into the same cells in the output sheet.
Starting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.
View 4 Replies View RelatedI need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)
So far I got.
Code:
Sub FillDownFormula()
Code:
Range("L2").Formula = "=RC[-3]-RC[-2]"
Range("L3").Select
Columns("l:l").Select
Selection.NumberFormat = "h:mm"
Dim rng As Range
[Code] .........
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedI need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View Relatedway to do this but i have a sheet that is into 5 - 6 thous rows, in one of the columns (names) i sort it by names and then order it by subtotal for certain values.
What i need to know, is there anyway i can take just the subtotal values out and put onto another spreadsheet without copying and pasting it all as there are lots of subtotals and this would help alot as the other info is not nec. just the subtotal'd info. either that or is there anyway i can highlight the subtotal'd row info in yellow/bold text anything like that that would make it stand out without having to do it manually?
I’m trying to get my sheet so that at each change in month it creates a sum of the value but I want to sum to show up in the subtotal value column.....
View 10 Replies View RelatedI have a sheet where i want to delete duplicate rows where column A and column B combined are equal, i.e. range(Ax:Bx) where x is the current row. I am using the macro below but cant seem to get it working as I keep getting a type mismatch error and Im not sure why.
View 2 Replies View RelatedI have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies View RelatedI would like to create a VBA code where it will delete the entire column if the cell value is equal to value in D2
For example:
Sub Delete_Columns()
Dim rng As Range, cell As Range, del As Range
Set rng = Intersect(Range("G2:S43"), ActiveSheet.UsedRange)
For Each cell In rng
If (cell.Value) = D2 _
Then
If del Is Nothing Then
Set del = cell
Else: Set del = Union(del, cell)
End If
End If
Next cell
On Error Resume Next
del.EntireColumn.Delete
End Sub
======
But I think this line is wrong but I am not sure how to fix it - If (cell.Value) = D2 _
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies View RelatedHow to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
I have a sheet of over 60000 rows a small section of which I attach..
I need a formula in cell d2 to give the total for c2 to c10,d3 to d10 will contain this same total...cell a11 starts the next group and the formula for the group total will be in d11 to d18 etc
Trying to do a Subtotal in VBA...
View 13 Replies View RelatedI seem to be experiencing a problem using the SUBTOTAL formula. Is it not possible to use subtotal in a running command? ie [A2] = SUBTOTAL(102,A$1:A1) then drag for a couple cells vertically. "0" is displayed for ALL dragged cells.
View 9 Replies View Related