Delete Visible Rows After Auto-Filter & Exclude Headings
Sep 5, 2006
I am asking if it is possible to delete filtered rows? With code.
What I mean is after setting a filter, then deleting all shown rows except row 1, (Titles)
I did a search but nobody seams to have asked this yet, so recorded it, but that did not seam to enlighten me much either.
Or is this the wrong approach, should I delete using a loop, using the filtered criteria as to say delete row, or move on to the next row?, this would be far more time consuming as when all can be deleted at once if possible of corse.
I have tried and tried to get the VBA code working that will tell me the number of visible rows in an autofiltered set of data, but the result I seem to be getting is always "1". Below is the most simple form of the code that I am using (it is based on previous posts and tutorials on this site). (I have also attached a workbook with sample data and the code)
With ActiveSheet Set rnData = .UsedRange With rnData . AutoFilter Field:=1, Criteria1:="5" .Select 'demonstrate that the rnData range is valid lcount = .SpecialCells(xlCellTypeVisible).Rows.Count End With End With
I'm working through a filter macro to delete unecessary rows of data from my dataset.
- I have a Dynamic Range for my dataset called "CanadaData" - I'm trying to delete rows from the 5th column of my dataset for cells containing "DIRECTSHIP"
The macro filters the range fine, but when if comes to deleting the row, the macro stops.
Sub CanadaWarehouseFilter() x = Range("E" & Rows.Count).End(xlUp).Row If Application.WorksheetFunction.CountIf(Range("E22:E" & x), "DIRECTSHIP") > 0 Then
I'm using auto filter to gather information from a giant list. I'm able to use Subtotal function in Row(1) )to gather all the numbers for a person.What I havent been able to do is figue out a way to get the value of the person that I am auto filtering.
Example Row 1 contains my subtotal formula's Row 2 Header Row Row 3 Auto Filter Buttons Row 4 All The Data
Column(A4:A65000)has the names of the people So when I use the Auto filter by Name how can I get the first visible cell name to show in (A1)?
I use currentRegion to add the item to the combobox, but i don't know how to add without including the first cell in the range,as usually, it is the field name.
I have an excel file with multiple sites and I need to delete empty rows base on two repeated words in column A. Empty Rows need to be deleted between the cells in column A called Litter and Community. There are other empty rows that need to stay in so only rows between "litter" followed by "community".
I can't understand how Delete works when applied to a table.
Here is my table: Number Letter Test
[Code]....
If I use "EntireRow.Delete", I have an error. If I use "Delete" only, it works for A and B, but for C, it suppresses the Letter column.
By the way, I don't understand why I have to include header (Table1[[#Headers],[#Data],[Letter]]) when I filter to find unique letters at the beginning of the script.
I have a range that has been formatted as a table. Once I've applied a filter, if I try to select all of the rows, and delete the visible rows the option is greyed out.
Is there no way, short of vba, that I can just simply delete the visible rows?
I'm trying to clean up several long worksheets by removing rows that don't contain a visable number or letter.
I want to remove all rows that only contain either empty cells, formulas that evaluate to a empty text string (""), cells that contain error values, or cells that contain zeros, or any combination of the previous.
I've stumbled onto the following, but it does not work.
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product F1020 F1023 F1025 F1120 F1123 F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120 F1123 F1125
TO
F1020 F1023 F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
When I run the macro, some columns are already hidden. The macro doesn't seem to autosize cells correctly. For instance, one cell in a row appears to have some contents hidden (or below the reading area of the cell). In other instances, the rows are auto-size to huge heights and widths.
I am using the following code to filter for data I do not want and then to delete those rows and show remaining data. It works fine except when the filter comes up empty and there is no unwanted data to delete.how to improve this code to accomodate this situation?
Selection.AutoFilter Field:=4, Criteria1:=">" & dweekend, Operator:=xlAnd Range("A2").Select Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select Selection.EntireRow.Delete ActiveSheet.ShowAllData Thank you for reading
I have written some code that will allow me to filter and delete any rows where there is a value in a column ( column J in this instance ) more than 2500. The problem is that it only wolrs when i press F8 and step through the code, and not when i press the commnd button and run it.
Sheets("CAIZOLY9").Select Range("A1").Select Do Until ActiveCell = "Payment Amount" ActiveCell.Offset(0, 1).Select ActiveCell.Select Loop
Do Until ActiveCell.Value = "" ActiveCell.Offset(1, 0).Select If ActiveCell > 2499.99 Then Selection.EntireRow.Delete Else End If Loop Range("A1").Select End Sub
I just came across an error in one of my workbooks where I had duplicate headers on a few columns
So When I used AdvancedFilter to " cut" the data into several workbooks for end users, the data in the first column was pasted 2x and the second columns was ignored altogether.
Headers since changed and that fixed the problem.
I'm just curious why the second column was ignored altogether
Take a look at the attached which shows a quick sample of a set of data and an accompanying criteria box. I'm trying to run an AdvancedFilter on it, but nothing seems to work. When I run the filter, I get zero rows returned. I've tried filtering using the headings in the criteria box and tried it without... but not much luck. I'm guessing the problem has to do with the data itself, and not the criteria box.
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
1) Highlight column A, and do a search on the word "Item" 2) Once it finds the word item, move 2 rows above it, and delete all rows above the word "Item"
The word Item at times can be on any row, and its very random, but its always in column, A. I tried doing it with a regular macro, but it seems to remember the row that I used, rather than two rows above the word "Item".
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
I have a sheet for addresses (Column 1 = Name, Column 2 = Address line 1, Column 3 = City, Column 4 = Postcode) and I run a macro that Filters that data based on the the city to different Tabs. This works fine except that sometimes, once the data is filtered I will find one or two addresses on my new filtered sheets that I really wanted to exclude. As my main address Tab information changes regularly, Ideally, I would like to see the Item on the City filtersheet, Double click it, and this would have the effect of deleting it from the City filtersheet but also copying it to an "Exclusions" Sheet which I could use before I run my normal filter macro to filter out these bad addresses.
I have a spreadsheet that I use throughout the day and have to send an email to another person when a customer makes a payment. The number of products they pay for will be different each time and I have the code to copy the right cells into an email and the code to insert the right number of rows for how many things the customer is paying for however as I use it multiple times through the day, I need the code to insert the right number of rows, copy it over to the email then automatically delete the rows it has just inserted so it is back to basics so I can use it again.
The code I have for the inserting the rows (from searching through forums) is:
Sub PRows() Dim NextRow As Long Dim NrOfCopies As Long Dim i As Long Const NrOfCopiesDefault = 1 Const NrOfCopiesMaximum = 9
I have a spreadsheet that includes a column with location names and a column with location numbers. What I need to do is count the visible unique numbers and names (seperately) in a certain column when using a filter. I have found the formula to count the unique values and a formula to count the visible cells, but not a formula that does both.
I have values in cell B2:B50 with values such as Quality, Eng, Purchasing etc. When i go in Auto filter based on Coulmn A2:A50 (with July only) and count "Quality" manually under B2:B50, the answer is 26. But if I write formula Countif(B2:B50, "Quality") I get answer 41.
Is there a way to use Countif function, if I am in the Autofilter mode so as it counts only that rows which are visible under Autofilter and not ALL rows.
In the code below, I found out how to make the column widths automatically adjust on a worksheet based on the text entered. This code works great but it also reveals the hidden columns on the worksheet. Can i prevent it from doing that?
Private Sub Worksheet_Change(ByVal Target As Range) With Me.Cells .Columns.AutoFit End With End Sub
Found here: Automatically Adjust Row Height & Column Width
