I am using the following code to filter for data I do not want and then to delete those rows and show remaining data. It works fine except when the filter comes up empty and there is no unwanted data to delete.how to improve this code to accomodate this situation?
Selection.AutoFilter Field:=4, Criteria1:=">" & dweekend, Operator:=xlAnd
Range("A2").Select
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select
Selection.EntireRow.Delete
ActiveSheet.ShowAllData
Thank you for reading
I am aware this is probably very simple, but I haven't been able to find a usable macro yet. I would like the data in the workbook that is not "Tuesday" (column L) and is not "3" or "4" (column I) to be deleted. All rows that have "Tuesday" and either "3" or "4" should not be deleted. Each row that is not deleted must have Tuesday in column L. All other cells are blank intentionally. The workbook will remain the same titled WKBK1 (no need to put the output data in a separate workbook nor separate spreadsheet).
Do you know what the macro would be so I don't have to copy and paste a formula over a large number of cells?
I want to delete some unwanted rows on closing my excel file. the blank rows are between set of datas. so it has to check all the blank rows, delete it until the last one. example
data blank rows data blank rows data blank rows data
My spreadsheet has 600rows and the vertical scroll bar ends at row 459424. I have attempted to delete all of the extra rows by holding SHIFT and CTRL, striking the down arrow then right-clicking on the left margin of highlighted row numbers and choosing delete.
But the unwanted rows are still there and my vertical scroll bar is not correlated to the 600 rows.
I have a sheet for addresses (Column 1 = Name, Column 2 = Address line 1, Column 3 = City, Column 4 = Postcode) and I run a macro that Filters that data based on the the city to different Tabs. This works fine except that sometimes, once the data is filtered I will find one or two addresses on my new filtered sheets that I really wanted to exclude. As my main address Tab information changes regularly, Ideally, I would like to see the Item on the City filtersheet, Double click it, and this would have the effect of deleting it from the City filtersheet but also copying it to an "Exclusions" Sheet which I could use before I run my normal filter macro to filter out these bad addresses.
I have written some code that will allow me to filter and delete any rows where there is a value in a column ( column J in this instance ) more than 2500. The problem is that it only wolrs when i press F8 and step through the code, and not when i press the commnd button and run it.
Sheets("CAIZOLY9").Select Range("A1").Select Do Until ActiveCell = "Payment Amount" ActiveCell.Offset(0, 1).Select ActiveCell.Select Loop
Do Until ActiveCell.Value = "" ActiveCell.Offset(1, 0).Select If ActiveCell > 2499.99 Then Selection.EntireRow.Delete Else End If Loop Range("A1").Select End Sub
I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
I'm working through a filter macro to delete unecessary rows of data from my dataset.
- I have a Dynamic Range for my dataset called "CanadaData" - I'm trying to delete rows from the 5th column of my dataset for cells containing "DIRECTSHIP"
The macro filters the range fine, but when if comes to deleting the row, the macro stops.
Sub CanadaWarehouseFilter() x = Range("E" & Rows.Count).End(xlUp).Row If Application.WorksheetFunction.CountIf(Range("E22:E" & x), "DIRECTSHIP") > 0 Then
I am asking if it is possible to delete filtered rows? With code. What I mean is after setting a filter, then deleting all shown rows except row 1, (Titles) I did a search but nobody seams to have asked this yet, so recorded it, but that did not seam to enlighten me much either. Or is this the wrong approach, should I delete using a loop, using the filtered criteria as to say delete row, or move on to the next row?, this would be far more time consuming as when all can be deleted at once if possible of corse.
I have a spreadsheet that i manually edit each and everyday e.g.
A B C EABGL/UD NDT254892 MRMR/RUS/ELQNS259762 LSL/UW/B LQNS267259 WWEX/UQ bbr263666 LWL/KL/B 270407 MYTCJ/UB NDT271774 LNL/SB/UB HLC - 271955 SMMQD/WT HLC - 269516 EACO/TN/UGBBR257827 NILVA/UC EUi273645
For everything that doesnt equal EM, LN, LW and TH in column A, everything should be deleted in column B.
For the remaining EM, LN, LW and TH, i would then like it to delete / (forward slash and all characters after this) so that this would make my life easier.
I am using an autofilter to delete chunks on unwanted data, by using Range(Selection, Selection.End(xlUp)).Select however it picks up the header row. Is there anyway I can either get the selection of data to select one less line, or a way to get it to leave the header line?
I'm using excel 2010. I'm working with columns of values where most of the values are numbers - which is fine, and there are some numbers that have a "p" at the start of them.
e.g. Column has 49, 52.2, p56.7, 34
OK, I want to preserve the 56.7 but I want to delete the "p". I'm thinking I've got a mental block as to how to delete the unwanted "p"s but I can't think of how to do it at the moment! My code goes as follows:
If Left(Cells(1,1),1) = "p" then 'delete the "p" and leave the remaining number in tact End if
I have a spreadsheet that only contains 1500 rows but excel acts like it is is using the full number of rows available. I have a print area defined and I have tried deleting the unwanted rows but nothing seems to work.
I work every day with big amount of item numbers and lists in excel and I need some macro or code to automatically remove rows, containing unwanted text.
Need to find out how I can restrict a worksheet to show only the columns and rows that I want. For example, I want to show columns A to H, and rows 1 to 25, and nothing else - I don't want there to be a column G, or a row 26, just blank grey space. I know it's possible, because I've seen it done : D . But the closest I can get to is: View > Page Break Preview, which isn't quite what I'm after.
After doing some searching I found a macro here which imports multiple text files into one workbook, keeping each text file as a seperate worksheet, each worksheet named the same as the original file name (minus the .txt extension).
However, it adds a blank line between each line of text. So I get this:
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62
Reply from 172.27.133.29: bytes=32 time=62ms TTL=62
Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
instead of this:........
Pinging 172.27.133.29 with 32 bytes of data:
Reply from 172.27.133.29: bytes=32 time=232ms TTL=62 Reply from 172.27.133.29: bytes=32 time=62ms TTL=62 Reply from 172.27.133.29: bytes=32 time=65ms TTL=62
This doesn't happen when I use the import wizard, or when I just open the file from the File -> Open menu.
My text files are always the same format (number of lines, etc.), so it's easy to delimit and insert forumlae as needed, but those extra lines are breaking a macro I've previously written to parse the data.
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
I have an excel file with a table in it. It contains 2051 records (attached). This is just a sample, the original file has around 30,000 rows.
When I start using filters, I run into problems:
Step 1: Filter by Unit, condition (e.g.) Unit_23 Excel shows in the status bar the following message: 437 of 2050 records found.
Step 2: If I scroll to the bottom of the table, the row numbers are colored in blue (normal for a filtered list) however the last row is not colored and it actually should not be shown since its unit is not what I filtered for (its unit is Unit_25)
Step 3: Clear the filter of Unit
Step 4: Sometimes (depending on what I filter for), one or more of the bottom rows are hidden!!!
I am new to to VB Scripting, filter the records. In the attached file there are multiple records which needs to be filtered. Once all the records are filtered, i want to delete the entire row of that record(s). I want to filter column 'F' with the values mentioned in Sheet2. I tried recording a macro, but it is not allowing me to do so as the macro has some limitations. The search and delete row loop The main purpose is to delete the row of the value, if not found, move on to next value in Sheet2.
removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
