Determine If Value Found In Autofilter
Dec 24, 2007
I have worksheet that is used as entry log. In this log I have a month column that the month number is entered into based on the month of the entry. I have vba code that filter on this month column and copies the visible results to another worksheet for just the month that is filtered. The problem I am having is that if the month I am filtering on is not found it is pasting the information from the previous search. I am guessing there are two ways to solve this problem:
1. I need code that in the form of an ElseIf statement where the if the value of the autofilter's criteria isn't found then do something
2. I need code that clears the clipboard of copied data after it pastes the data so that when the first occurance of a value not being found occurs nothing is pasted.
I'm totally uncertain as to how either of these codes should be written.
View 4 Replies
ADVERTISEMENT
Apr 5, 2007
DETERMINING ROW NUMBER FOR DATA FOUND WITH VLOOKUP IN VBA
I have a user form with a combobox (called STKCODE) that calls up a vlookup routine to search for this item in a named range on a worksheet and retrieve related data to display on the userform. All this works fine.
What I would like to know is how to easily determine the row number on the worksheet, representing the row the data is stored in, if thats at all possible....
View 9 Replies
View Related
Nov 29, 2006
WHEN I FILTER FOR WORDS BEGGINING WITH LETTER I. THERE IS NO DATA...SO I HAVE SOME CODE THAT WILL POP UP MSG BOX. AND IF THERE IS THEN COPY DESIGANTED RANGE..HOWEVEER WHEN I FILTER USING THE BELOW CODE...IT DOES NOT RECOGNIZE THAT THERE IS NOTHING AND JUST GOES THROUGH AS NORMAL..
Sub START()
Dim rng As Range
Dim rng2 As Range
Dim worksheet1 As Worksheet
Set worksheet1 = worksheets("MAIN")
Selection.AutoFilter Field:=4, Criteria1:="=I*", Operator:=xlAnd
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Set rng2 = .Offset(0, 18).Resize(.Rows.Count - 1, 1)
.SpecialCells (xlCellTypeVisible)
On Error Goto 0
End With
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else
worksheets("noms").Cells.Clear
Set rng = ActiveSheet.AutoFilter.Range
rng.Offset(1, 0).Resize(rng.Rows.Count - 1).Copy _
destination:=worksheets("NOMS").Range("A1")
End Sub
View 8 Replies
View Related
Jul 10, 2014
How do I determine if AutoFilter is turned on when I open a sheet? I tried FilterMode with no luck.
HTML Code:
Sub macro2()
Dim t As Boolean
s = ActiveWorkbook.Name
t = Worksheets("SO_PO_14").FilterMode
End Sub
The FilterMode call always return False,
View 2 Replies
View Related
May 9, 2014
I would like to determine if the VisibleDrowndown is TRUE in the attached table.
The current macro sets it to FALSE in field 1. However, I want to identify when it is TRUE so I can run this macro.
Attached File : V1.xlsm
View 1 Replies
View Related
Sep 25, 2009
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies
View Related
Aug 20, 2014
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
View 4 Replies
View Related
Jan 16, 2007
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies
View Related
Dec 12, 2007
i need to have this information entered in the row below each time which may or maynot be empty. i need a message box with error handling to ask if the user wants to enter more products or finish and another message box if the entries (which start at cell B4) go past B10 that they have to exit and start a new sheet. I have put the code below and attached the workbook so it may be of use to others
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Data
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
If rngFind.Row > 1 Then
ListBox1.AddItem rngFind.Value
End If....................
View 5 Replies
View Related
Jun 27, 2009
if it doesn't find the value give a msg box stating that "Schedule Not Found".
View 2 Replies
View Related
Sep 30, 2008
I can use vlookup to find the info I want, problem is the I need to grab a value from the column before it. I was hoping that i could use Index/Match combo, but the data is not sorted. I was also hoping that somehow, in conjunction with vlookup, I could the CELL() function to at very least tell me which row it found its data in, but I guess CELL() doesn't work that way.
Bottom line: Is there someway to find out what row a value is found on. I already know which column I need and I figure if I can determine the row, I can use INDIRECT() to create the reference. My boss said VBA solutions are not permissable in this case otherwise I could have solved this issue.
View 9 Replies
View Related
Sep 14, 2012
Right now in my code I'm using the below section to determine the column in which to search for dupes, and the last column of data for that range. However, I make the user select only part or one column through IF statements above, so there's no need for the user to input this information. I'd like to replace the choice part with and automated routine that determines the DupeCol from the column section selected, and determines the rowend from the last used cell to the right in the rows in that column selection. But I don't know how to do that and keep the values as strings.
VB:
Dim RowEnd As String, DupeCol As String
Dim LastRow As Long
DupeCol = InputBox("Type in the letter of the column you want to look for duplicates in.", "Fill in the Info")
RowEnd = InputBox("Type in the letter of the last column you want colored.", "Fill in the Info")
View 4 Replies
View Related
Jan 14, 2014
I have a big serie of charts (parabolas - open down) that i need to find the max value.
View 8 Replies
View Related
Jan 6, 2014
I would like to choose an option (C, Q, T) and get a result in 1 column.
In other words, if I type C in H6, I must get a different result in I6 as opposed to if I choose Q or T in the same column. However if I leave it blank I should have nothing or a 0 in I6.
In the attachment above you will see that I gave a sum for C (A3), Q (A4) and T (A5). The sum for each one is broken down into a percentage rate and a flat rate.
These rates are dependent on the initial amount entered into G6. C, Q, T stand for Cash, Cheques, Transfers. The form of transaction determines the % and flate rate to be charged.
View 11 Replies
View Related
Mar 21, 2006
I have a spreadsheet with Ethnicity (White, African American, hispanic,
Asian, other) in column A and Time (hh:mm:ss) in column B.
I trying to determine by how many White, for example, have spent less than 5
hours, >5 hrs but less than 10 hr, etc.
My plan is to make a chart of the data.
I've been looking at sumproduct and COUNTIF but I can't quite figure it out.
View 10 Replies
View Related
Mar 26, 2009
I'm working with box quantities and would like to get a formula that would take the box quantity and return the largest value based on some parameters. Here are my parameters:
Box Quantity
- 375 pieces
Break down options
2 - 187.5 pieces
3 - 125 pieces
4 - 93.75 pieces
5 - 75 pieces
Obviously options 2 and 4 are no good as I can only work with even break downs. This leaves me with either 3 or 4 and because I want the largest, I would choose number 3. What I need is help on a formula that will take the value of the box quantity and return the largest whole number. I think for the time being I would like to leave the break down between 2 and 5 as well.
View 5 Replies
View Related
Dec 13, 2011
What do I do if I want to determine whether an input is within a specified range, and then for there to be an output of a certain value from another cell?
For example, with tax brackets: if income (D) falls within B and C, return value A(from a separate column)?
Here is the data I have:
Column A
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
"Formula referencing D1"
[code]....
Column D, cell D1 is where you would input a number (income) Column E, cell E1 is where I want the output value.
Basically, what I would like is a formula to put into column E that will do two things. First, to determine if the value in D1 is within either (B1-C1, B2-C2, B3-C3, B4-C4, or B5-C5). Second, to then output the value of either A1, A2, A3, A4, or A5, for each respective range.
View 9 Replies
View Related
Feb 2, 2012
I want to write a function that goes out and reads a cell, waits a few seconds, then reads the cell again, since it is constantly changing. Then report back the difference between the two readings of the same cell. The following code does not work since t0 and t1 always come back the same value.
Code:
Function ReadTime(t)
t0 = t
DoEvents
Application.wait Now() + TimeValue("00:00:15")
t1 = t
ReadTime = t1 - t0
End Function
View 3 Replies
View Related
May 16, 2007
formula I can use to determine age between date of birth (in one cell) and an event date (in another cell)., i.e. birthdate 3/15/2000 with an event date of 3/2/2007.
View 9 Replies
View Related
Apr 5, 2009
I am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two.
I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this
=LastRow(D6:D27)
The result would be row 10 (the first blank row).
I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.
View 9 Replies
View Related
Nov 8, 2006
i have this code behind a command button in a userform
Private Sub cmdCalculate_Click()
If Me.txtLength.Value > "6.021" Then
lbM2.Caption = Val(txtHeight) * Val(txtLength)
End If
End Sub
the calculations work fine up till i enter anything over 9.999 in the textbox called "txtLength" Can any one see why this will not perform calculations when the entry is more than 9.999 in text box "txtLength"? i tried replacing the label control with a textbox!
View 4 Replies
View Related
Jan 20, 2007
Determine If A Number Is Even Or Odd. i would like to Determine If A Number Is Even Or Odd...?
View 3 Replies
View Related
Feb 14, 2007
I want to easily determine the max value of the stocks I own by only changing the daily value but i cannot bypass the circular reference problem. Example:
Stock|Today's Value| Max Value
A | 1 | 1
B | 3 | 3
Tomorrow i'm going to change today's value and my goal is that the max value remains unaltered if today's value is smaller. like this:
Stock|Today's Value| Max Value
A | 2 | 2
B | 1 | 3
View 4 Replies
View Related
Dec 4, 2007
at present i have the following code that does as intended.
If number < pr1 Then
number = 0
End If
how would i alter this so that it changes the 'number' if number is between pr1 and another number pr2?
View 9 Replies
View Related
Dec 20, 2007
I am working on a spreadsheet where individuals must enter a value between 1 - 4 or n/a. I would like to include a formula for each question where if they enter a value between 1-4, this scores 1 and if they enter n/a this scores 0. Does anyone know a simple formula I could use, I have tried IF formulas but keep getting muddled.
View 2 Replies
View Related
Jan 19, 2009
Attached is this massive excel spread sheet. It has been pruned so that it can be attached to this posting. It has 27 tabs, users input orders into home unit page (ie Tercero), other sheets interface to form sheets used for deliveries (See Terc Del), production (see Friday), and summary overview (see Campus).
I would like to, using VBA, create a pop-up window that pulls up a print command box that will allow the user to print by day, or by week, print one worksheet or print all. I currently use macro buttons but print the entire page on a given tab. When asked to print a page, It would be great to be able to print column (Fri for ie.) a day say, and print only a item in a column/row that has a numeric value inputted into a cell, all the way down the page. So in this case, see the Terc DEL, print only Friday and only those fields with a number inputted into a cell.
Another option for the DEL sheets could be to print only rows with Data found in columns B,D,F,H,J,L,N tells the macro to print that entire row, to which includes A->O, if that makes sense? By doing this, my hope is to have the document print in a larger font, and column width, as there would be less info per page to deal with, and reduce the amount of paper waste. The headers of the page which is 1->5 would have to be repeated as the document printed. The first actual data field would be row 5.
The source document has a total of 200 rows (see Tercero). Other tabs will have comparable row settings, such Terc-Del, Friday, Campus.
View 4 Replies
View Related
Nov 17, 2009
After entering the vba code, testing it and successfully running it, I simply 'saved as" in the excel menu, changing the name.
Now I can't run the macro any more, because the macro is looking for the file with the old original name. I can't even find any references to the old name anywhere whatsoever, within the code itselt, etc. Why does the macro code even know/remember that old name?
I've kind of found similar questions, but I do not understand the answers that people have offered. It seems someone will suggest a chunk of code to add that will say at some point "c:\temp..." etc, but this doesn't make sense to me sense I intend of storing my excel file in a number of places and it won't always have the same reference location.
For now I'd like to ask if there is some general code I can enter or some good code to use as a reference.
View 7 Replies
View Related
Feb 4, 2013
I want to select only the cells that have colorinterior = 4 (Green)
Dim Cell As Range
For Each Cell In [G:G]
If Cell.Interior.ColorIndex = 4 Then b = Cell.Address
Next Cell
but this code only selects the last cell with green format, my idea is to select the first and the last cell on column G, making b the last cell and a the first cell, to delete afterwards what is between, is there a way on the above code to select only the first cell and not the last one, making the a = first cell and b = last cell?
View 3 Replies
View Related
Apr 18, 2013
I have a sheet call Paste and one called look up -
On the lookup tab there is a list of accounts (the numbers of which varies perday) in column B - Using VBA I wish to do a vlookup on tab Paste looking in Column B and returning Column Cs value -
I have tried a few Codes that I have found online but in all cases whenever an account is not found the cose just stops rather than moving to next account
View 1 Replies
View Related
Dec 10, 2006
I'm looking up a value and would like to replace the #NA error with text "No Match".
=INDEX(Sales_Assignment_Query_WW0612.xls!$F$4:$F$35384,LOOKUP(10^307,CHOOSE({1},MATCH(M9,Sales_Assignment_Query_WW0612.x ls!$C$4:$C$35384,0))))
I was trying to use =IF(ISNA(entire_formula_above),"No Match",entire_formula_above) but can't get it to work or struggling with closing off brackets with number of arguments.
Another user in the newsgroup suggested this sample code but I've been unsuccessful in figuring out how to use correctly.
=LOOKUP(REPT("z",255),CHOOSE({1},"No Match",INDEX(D2:D10,LOOKUP(10^307,CHOOSE({1},MATCH(F2,A2:A10,0))))))
View 9 Replies
View Related
