I have an existing User form with a drop-down list. If I open the user form, I can't select the drop-down list? Each time I move the cursor inside the User form, it wants to add another drop-down list?
View 2 Replieshow to disable X button in the Userform?
View 2 Replies View RelatedHow to disable different parts of a userform?
I dont really want to go through each control as I reckon it will be handy code to have in the future if I need to add more but so far my code is:
Private Sub UserForm_Activate()
With Sheet2
n = 3
[Code].....
I have two option buttons on a user form, one for a temperature of <250 & one for a temperature >250. I want the option button >250 to be greyed out or have it so that you cannot choose it & option button <250 selected if a certain criteria in a list box is selected. The list box is called Valve_Model & the criteria i want it to work on is if the valve model HPBV Soft is selected & HPBV Soft AC.
View 14 Replies View RelatedHow can I put the webbrowser disable so that is impossible to clik in it?
View 7 Replies View RelatedI have below code for prevent to close a user form:
[Code] ....
But this work to me only one time, when i make a second press on close button user form close. I think i have to make a loop or something but i really don't now how?
A list in A2 of Sheet 1 of workbook has values "Select", "Yes", "No". How can I get the functionality using VBA so that until a certain rule is met (say A1 becomes 1) selection of items in the list is disabled? (Or any selection of items in the list returns a value of select only?
View 4 Replies View RelatedI have produced an order form and one of the columns is 'availibility' with all cells in this column set to a validation list containing 'Yes,No'.
If the user selects 'no' for a particular item's availibility, i want that row of cells to disable in some way. i.e change colour to grey and become locked.
If the user selects 'yes' the row for that item will remain unlocked and will not change colour.
I have a userform and want to disable the command button unless a text box contains text. what I need to do?
View 2 Replies View RelatedI would like to take a List of numbers, which come from a separate spreadsheet, place them into a UserForm text box and then use a command button to input the list of numbers into a column of cells. The list would often vary, between 1 and 10 entries. But if I could do this, I would be able to resolve an issue with my spreadsheet that continues to haunt me (the dreaded number stored as text.....). I know that you can assign a single textbox value to a single range-cell value. But if I could input a list at a time, it would obviously save a lot of effort.
Example
In spreadsheet #1, I would copy the list below.
25466
87550
66985
44252
In the user form I would paste these numbers into the text box and they would be input into Sheet #2
B6 = 25466
B7 = 87550
etc. etc.
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
I have a userform that loads with when excel starts. The workbook has a second and third sheets with names from A1 to A20. The form is used to add information to the first sheet. There are two list boxes on the form the reference via VBA the names on sheets 2 and 3. When form initially opens the list boxes are void of data. I also have a macro that reopens the form without having to close the workbook. When I close the form and reopen it the list boxes are populated as they should be - so the list boxes are working correctly just not being populated initially. In the open form module I have code that sets the rowsource for the data on sheet 2 and 3. Why the userform does not populate when the workbook initially opens?
Here is the code in my open userform module
Sub openuserofrm()
ActiveWorkbook.Sheets("VILLAGEvisits").Activate
Sheets("VILLAGEvisits").Unprotect Password:=""
Sheets("OldVisits").Unprotect Password:=""
[Code] ....
I have a user form called frmAddRepresentative. Under the Initialize event I have the following code.
Code:
Private Sub UserForm_Initialize()
'This procedure runs when the frmAddRepresentative form 'is initialized. The procedure sets the repInformation
'sheet as the look sheet sends the focus to the combo box 'used to enter the name and updates the combo list
Set WS = calcRepInformation
UpdateComboLists
Me.cboRepName.SetFocus
End Sub
I am getting the following error: Could not set the List property. Type mismatch. I have the exact same code on other sheets and it works fine.
Some Background info:
This is my first post! I am a total novice when it comes to VBA in Excel (but I'm a fast learner!), so please bear with me if my question is either obvious or easy (or if this is a question that's been asked 14980213 times already). I have some programming experience, but all in C or C++, not in VBA--this makes the project challenging. I also have to hand this off in a few months and trust that it'll never break, ever--more challenging.
I'm trying to make a Participant Tracking System for some workshops we offer. The intent is to make a userform so that an administrator can input all the information for the participant in question. One important question on the form is which course the participant intends to take; the snag is that the current list may change over time.
The Spreadsheet is set up with Course headings starting at R8C8, and continuing across for all 16 courses we currently offer. The data for the participant is entered into Rows 1-7, and the date they completed the course in the appropriate column for that course. There are some formulas in Rows 1-7, the important one here counts up the number of classes currently offered.
So, below is the code i'm trying to use, at least to start. I am making a combobox that has all of the available classes.
Private Sub UserForm_Initialize()
Dim ClassList() As String
'R5C6 contains a formula that calculates the number of classes offered. The value is currently 16
Redim ClassList(R5C6)
iCount = 0
y = 8
Do While iCount > R5C6
'R8C8 is where the class list begins.
'It continues horizontally along the rows for the 16 titles offered.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
y = y + 1
iCount = iCount + 1
Loop
With ClassListBox
.Clear
.List = ClassList
.ListIndex = -1
End With
End Sub
I used to have a line that replaced the following chunk.
Range(R8Cy).Select
ClassList(iCount) = ActiveCell
It read
ClassList(iCount) = R8Cy
and did nothing for me at all.
When I initialize the userform, I get a blank combobox. It doesn't do what I want it to do, but that's probably because I'm telling it to do something weird.
I must say I have learned quite a lot from this forum. So, a vey big Thank You to the folks who are managing this forum and those who are contributing possible solutions. I have a question about copying data from a spreadsheet to a List Box in a User Form (Pls see attached). First, I select the Account from the drop-down cell in the Main sheet. Then I click on the CommandButton and a UserForm will pop out with a List Box that draws relevant data from the Remarks sheet according to the Account that I have selected. The data in the List Box must be in this format : "Date1 : Remark1"; next line "Date2 : Remark2; line 3 "Date3 : Remark3"........until the last available entry.
View 2 Replies View RelatedI have five comboboxes in userform1, they are link to Column A, Column B, COlumn E, Column G and Column Z of "Reference" worksheets respectively. The values in each column could contain duplicate values. However, I'd like to only display the unique values in those combo boxes and I have no clue how to achieve this.
View 7 Replies View RelatedI am trying to make a userform that will update a list in the spreadsheet. Basically if a user types into a multiline textbox numbers (separated by line) like so:
5
10
15
20
then the macro will paste that data at the end of a list so that each number is in a new cell. The only thing I have that comes close is Range("A1").value = listbox1.value The problem with this is that it will input the entire list into one cell. I have attemped various things, like trying to get the list into the clipboard and pasting, but I haven't really had much luck.
How do I allow the user to select from a dropdown list but disallow them from entering value into the textbox?
View 1 Replies View RelatedI've setup a list of names that is populated from a userform, this works OK. I have then tried to use a combobox (on a separate form) to use these names as its values, I first used the rowsource property but this only returned the first name in the list and after searching for the last few hours and trying different methods it's still not working.
Here's what I have;
To populate the list;
Dim irow As Long
Dim ws As Worksheet
Set ws = Worksheets("Clients")
'find first row in database
irow = ws.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
With ws
.Range("A" & irow) = txtNewClient.Value
I have also tried the userform_initialize, with no joy either,
I have designed a multiple list box on my userform and display it on one of the cells in the spreadsheet but with each list item separated by a comma when its display on excel.
The problem with my code is the delimiter appears at the first list item, but it should only appear if more than one list item is chosen.
|Apple|Orange
I was thinking if there is something like if gItem = 0 then only display sFruits Else display what I have below???
VB:
For gItem = 0 To FruitsList.ListCount - 1
If FruitsList.Selected(gItem) = True Then
sFruits = sFruits & delimiter4 & FruitsList.List(gItem)
End If
Next
.Cells(gRow, "AO").Value = sFruits
I have a sheet that creates a list of columns that may need to be updated or edited as necessary. Column A is a list of names that are alphabetized automaticaly from column D, so any change in column D would need to be reflected in column A. The attached sheet will (I hope) make things clearer.
I have 10 comboboxes - all require exactly the same list. Rather than having to copy the list 10 times in the coding - and changing the combobox name from listcode1, listcode2 etc, is there a loop code which I can add to do this for me??
Private Sub Userform_Initialize()
'Empty txtdate
txtdate.Value = ""[code].....
I am trying to populate a listbox in a userform using a dynamic list of data in column Y or worksheet "varhold".
Here is my code:
Code:
Private Sub Userform2_Initialize()
With UserForm2.listbox1
RowSource = ThisWorkbook.Sheets("varhold").Range("offset($y$1,0,0,counta($y:$y),1)")
.BoundColumn = 1
.ColumnHeads = False
.ColumnCount = 3
End With
End Sub
When I run this procedure, the box is blank. There is no list.
I have been working on large project using Excel VBA for several days. My code seems to be working correctly, but I have more to do and now, when I drag an object from the toolbox onto a UserForm, the object is not added to the list of objects on the form. If I go back to versions of the project that I was working on several days ago, there is no problem. If I run "Workbook Rebuilder", the objects that I have dragged onto the form are then added to the object list, but I still can't add new objects to forms from within the VBA editor. Is the project corrupted, or is there some other explanation, and are there any fixes? The code runs about 50 pages, and there are over 20 forms, so redoing from scratch is only a last resort option.
View 3 Replies View Relatedi want to use a listbox or combobox on a userform with the values coming from column A in the MAIN sheet. what i need is if the colour i want is not there i type the new colour in it then adds the value to the end of values in coloumn A and too the list for the next time i use the userform. is it possible to do this and how?
View 3 Replies View RelatedI am not sure if this can be done easily but essentially what I have is a userform that fills out a form that will used by several different people and saved to a central location.
There is a blank combobox currently labeled "Supplier:" that each person fills out each time on the userform (there are no dropdowns yet).
What I am wanting to do is for every person who saves (I have coded the save button) with the "Supplier:" combobox filled out to save what they entered and input that into the combobox dropdown so when the next person uses the userform the entry the previous person entered would be in the combobox as an option to select.
Essentially, a combobox populates itself based on what previous users have entered into it.
Currently I have a database in an Excel template. After a user creates a new workbook from the template, a macro button on sheet 1 brings up a window (a userform) to allow selection of items from the database sheet. The item selected is entered on sheet 1 by means of VLookup. That works fine, but to edit the database correctly it is necessary to open the template itself. This is not a user-friendly method.
I figure the best way to solve this dilemma is to separate the template from the database. That is, make the database sheet into a workbook. This I've done. Here's the problem: What code is there that links the list box in the userform (of the template) with the closed database workbook? Is it even possible? If a file path type code is required, it may work on my computer, but when I use my template and database on another computer, the code doesn't work.
Another problem, and similar is this: I'd like to be able to have a macro button that opens the database from the new workbook (which was created from the template) in order to edit the database. If having a template seems to be my problem, I must have it since each workbook created from it is a different project.
Excel 2007 and very new to VBA...
I have a userform (named "QAReviewForm") with a combobox (named "cboSupName"). I want it to populate with my named range "SupList".
FYI, the SupList is found on sheet 2, "Administrative Menu" in column E. E1 contains the heading "Supervisors", and my named range formula is
Formula:
[Code ] .....
When it runs, my form opens and the combobox is there, but nothing appears as options for me to select (yes, I have some values in column E).
I have a list of employees that can be assigned to tasks, the list is large enough that I cannot remember who is assigned to what.
All the employees assigned major tasks are automatically filtered out but these are employees with administrative tasks that should only be assigned as a last resort. I would like to assign the employees with administrative tasks a gray, italic, strike-out or some other font to indicate that they are different.
I assume this is done during the Add Item process...
I want to select items in a listbox and transfer those items via command button in a textbox. The listbox is already filled. I have no idea how to realize that.
Attached is the form I created so far. I copied everything together and matched it up for me. It's probably not the best way but it works. I marked the section where I need help in yellow.