I have a list of numbers in sequential order. There are numbers missing. Is there a way to have Excel insert rows for the numbers that are missing in the series.
example:
1
2
3
4
8
9
becomes
1
2
3
4
8
9
I have a long list of numbers (1 to around 3000) in Column A and I need to print out only the numbers missing from that list. The numbers are sequential (except the ones missing) and there are no blank or missing cells, only missing numbers.
EXAMPLE:
1
2
4
5
7
.....
So I would only need to print the number 3 and 6. - it can be all in one cell, or in one column, it doesnt matter.
I am trying to insert the missing numbers/rows on a numerical acsending column. I have a spreadsheet that has a list of 8000 parts that I want to put into numerical acsending order, however numbers are missing. For Example:
Column A is a numerical part number and column B is the description for the part number in column A. My spreadsheet used to be in perfect numerical order however over the years some rows have been deleted which makes my spreadsheet look like the below example.
ColumnA ColumnB
1 -------Part A
2 -------Part B
3 -------Part C
5 -------Part E
6 -------Part F
As you can see part number 4 is missing is there a way to insert the missing part numbers into column A and keep column B in order associated with column A? My goal would have the result look like this below.
ColumnA ColumnB
1 -------Part A
2 -------Part B
3 -------Part C
4
5 -------Part E
6 -------Part F
I am looking for a quick solution for this as there are 8000 rows. I have tried the MATCH function and can't seem to get that to work.
The excel file has industrial information arranged by sector. The sectors are represented by six digit codes that are not strictly sequential. For example, a typical example of consecutive codes is 120011,120012,120030,120040,130011. There are upwards of three hundred sectors.
The data I am using is missing certain sectors - sometimes more than 30 at a time. I would like to find a quick way to identify the missing sectors and insert rows there, preferably with the first cell in the row being the missing sectoral code.
I have a similar problems with columns as well. But I can always just transpose the data and use whatever solution works for the rows.
I have two columns of numbers (this week - Column A and last week - Column B). What I need to do is look at the numbers and pull two lists out in Columns C and D. In columns C a list of the numbers that are missing from last week in column D numbers that are missing that were added from the previous week. The two lists consist of about ten thousand rows of data.
******** language="JavaScript" ************************************************************************>
Microsoft Excel - Book3___Running: 14.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp
(A)boutA1=ABCD1This WeekLast WeekMissingAdded
21002103110311002310271032103210274103310331034104051035103410361055610371036
165571038 81040 91055 101655 Sheet1 [HtmlMaker 2.42]
I want to ask that I have got a workbook with different number series i want user form where i can enter its start number and end number and then it finds and delete shift cells up said series number i have entered in user form please see mentioned below example.
Series
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
and i want to delete 1 to 5 numbers delete to shift cells up.
I am currently using MS Excel 2007. Is there a way in VBA to automatically insert missing columns based on a defined series or range of values?
For example, we have a report that displays columns of: Year 2004 to Year 2012 per column (9 columns in total).
Sometimes, it displays missing a year or years (thus; our report has less columns). For example, it only shows 2008 to 2012 (missing 2004 to 2007). At times, it misses some years in between. What we do is manually add those missing years by manually inserting columns then inputting the missing year as their column headers.
Is it posisble for VBA to check if the columns contain all of the defined Year range (for example, you've initially defined: Year 2004 to Year 2012)? Afterwards, all missing columns are automoatically inserted (in chronological order or based on your defined values or range).
I am newer here and I want a macro in mentioned title. I have a number in column a2 and in column b2 quantity if in column a2 number is 2101400 and in column b2 i write quantity 50 so said number automatically fill series in column a like mentioned below...
View 9 Replies View RelatedI have a huge spreadsheet with addresses in column A and number in column B. Each address needs to have a ceirtain amount of lines inserted below, depending upon the number in column B. for example:................
With the new space inserted. the numbers i have range from 34 -2. does anyone have any code that will insert the number of rows depending on the number in column B? i HAVE had a look through the forums, but there are so many topics!
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
this is exactly what i am looking for also, can you please explain how i can use that code in 2007? I have attached a list of the numbers i'm working with, please can you have a look for me?
I've tried entering it ion visual basic but i keep getting:
COMPILE ERROR
INVALID OUTSIDE PROCEDURE
In column A, I have numbers from 1000 to 8600.
I want to identify (in a separate worksheet is fine) what numbers are missing inside the ranges 2500-2599, 3100-3399 & 3700-3799.
I have a 5x5 table which is filled by random numbers ranging from 1 to 99. I need to make a function that shows me all the numbers that are missing between 1-99.
View 1 Replies View RelatedI have a file with approx 3600 rows. In Col B there is a 13 digit EAN-13 code. I would like to find out which numbers are missing. I have to compare each cell from top to bottom in the B-column to the cell below and find out if there are some missing numbers. If the numbers are incremental then goto next cell. But if there's a gap in the numbers then it should insert the missing numbers with an increment of 1.
I think the logic statement should look like this:
i = 1
For x = 1 to last row
If the gap between B(i) and B(i+1) < 1 then
Insert a row and put the missing value in the cell on the new row.
Endif
i = i+1
Next x
The comparison has to be made from the 5 digits in place 8-12 in the code.
Here's an example (i've dimmed the digits that shouldn't be compared):
7330985920714
7330985920721
7330985920738
7330985920776
As you see there's a missing number between the third and fourth row. Here the value should be 733098592074 + the checksum that is a bit tricky to calculate.
Between the fifth and sixth row there are four missing numbers that has to be filled in.
The checksum is OK to leave out at this moment. The important thing is to get the 5 digits.
Excel 2003. As I entered 720 names/addresses in a spread sheet, I stopped and started repeatedly. When done, the row numbers go from 1 to 728. Puzzled, I carefully reviewed all names and the row numbers assigned. Row numbering skips eight numbers, 432-439. How do I get Excel to reassign the row numbers so they reflect accurately the number of entries?
View 2 Replies View RelatedIs there formula that I can use that would have Excel count the numbers in a colum and return the numbers that are missing, 1,2,3,5,6,7,9,10 and excel returns 4,8?
View 2 Replies View RelatedI have a sheet where one column has sequencial numbers from lowest to highest with some missing. So for example: A1 1, A2 3, A3 5, A4 6. Is there a formula that will display all the numbers that are missing from this column without skipping rows? So let's say: B1 2, B2 4 ect.
Basically I will be putting this on a different tab, so someone can go to that tab and see what numbers have not been used. It is a large range and is difficult for someone to scan through it all.
The current method I'm using to get the results I need in Excel are a bit manual and excessive. is a simple all in one formula for what I'm trying to do,
The data is 3 rows. We can also assume the data is in the first three columns starting from A1.
698
885
499
As you can see in the above set from 0 through 9, the numbers that are not listed are 0,1,2,3,7
And As you can see the numbers that are listed are 4,5,6,8,9.
How do I find and show which numbers from 0 - 9 are not in the set.
How do I show the number that are listed in the set Example:
Note: the special characters aren't needed.
698 4,5,6,8,9 --- 0,1,2,3,7
885
499
Note the the evaluation is for every three rows. So the three rows in the example are from a table with 150 rows. Each row begins a new evaluation for the next three.....Example:
698 and the following two starts the next set
885 and the following two starts the next set
499 and the following two starts the next set
and so on ......
i had a worksheet in which i had a column Named Cheque No. i want to print the missing cheque no's in a series of cheque no's.The logic here is that there will be different series of cheque nos for different transactions.Just check out my worksheet.
View 9 Replies View RelatedI'm trying to create a list of missing numbers in a range, but I can't fiure out how to do it. The problem lies in that the range of numbers is in the middle of a larger number. ie. xxx-xx-0001-xx would be number 1, and xxx-xx-0500-xx would be number 500.
I need to scan multiple sheets containing these numbers, and produce a list of the numbers missing from that range.
Example:
Sheet1 has xxx-xx-0001-xx through xxx-xx-0009-xx, and xxx-xx-0018-xx through xxx-xx-0042-xx.
Sheet2 has xxx-xx-0053-xx through xxx-xx-0062-xx, and xxx-xx-0067-xx through xxx-xx-0072-xx.
Sheet3 needs to have a function that produces a list showing xxx-xx-0010-xx through xxx-xx-0017-xx, xxx-xx-0043-xx through xxx-xx-0052-xx, and xxx-xx-0063-xx through xxx-xx-0066-xx.
I need to be able to do this without VBA. The list doesn't necessarily have to have a different number per cell, it could even show them all on 1 cell if it's easier, but it would be more presentable if it was 1 number per cell in a row or column.
Attempting to do a spreadsheet for my golf club, to record scores, etc...
Managed to get it to pretty much what I want despite some very extreme looking formulae! So for some scores such as 56,56,57,57,54,54, Rank would just give me 3,3,5,5,1,1, so I have put a second column next to 56,56,57,57,54,54 where I input scores to seperate ties (better back nine scores), so in the above I would have for example 30,29 next to the two 56s, 27,29 next to the two 57s, and 27,28 next to the two 54s, so the rank would return 4,3,5,6,1,2. I have gone three stages further, so if, the back nine score was also tied, I have a column for the last 6 hole score, the last 3 hole score and even the last hole score. This is some serious formulae at this point. However, I now want the OPTION to rank the original data as 2,2,3,3,1,1 if I don't put any data in the back nine column.
This is so that I can input doubles scores on the same spreadsheet as singles scores, so if two people shoot the same score in singles I can input the back 9 scores etc to decide who comes out ahead, but in doubles I would just leave the back nine score blank, and then two people would share 1st in the rank, but then I need two 2nd ranks NOT 3rd ranks as it currently is.
Just so you can see how complex it is the current forumlae in the rank is here is an example:
=IF(O7="","",IF(K$2="MEDAL",RANK(O7,O$7:O$255,1)
+SUMPRODUCT(--(O7=O$7:O$255),--(P7>P$7:P$255))
+SUMPRODUCT(--(O7=O$7:O$255),--(P7=P$7:P$255),--(Q7>Q$7:Q$255))
[Code] .....
There are other things in there to sort out a few other issues as well, but I cant see the wood for the trees so to speak, to get it todo what I want!
I have also attached a sample from my spreadsheet to better demonstrate what I want!
i need to find the missing numbers from 12 rows of 20 numbers.
ie, i have these numbers (only between 1-80) and need to find the *normally* 2 numbers that are not in that list between 1-80. there are 14 rows in this example
134810131417182832464855565758596475
412131417212223303235374044545861707880
57101117202528303435363940495155606264
35121823254148495051565860646670767879
311161719212225262829404447586063697578
126713162326353638394652535863707678
710172021272930414445464750515569727374
[code].....
these numbers wont be the same every time, but in theory after i enter 12 rows there should be only 5/6 numbers left max.
i need a script so that when i copy/paste 12 rows, i can be presented with the numbers not in that field. or even if i have a field of 1-80 displayed, then i copy paste my numbers in the fields below and can somehow highlight which numbers between 1-80 aren't in my pasted fields on the 1-80 field.
btw the numbers missing here are 24-68
ps im using excel starter 10 if that makes a difference
Is there anyway to find missing numbers from column by excel formula?
Here is an example:
A
B
C
01 06 44
01 31 45
01 39 48
04 21 27
07 21 44
27 30 44
[Code] .....
Missing Numbers
32, 41, 49
02, 06, 11, 14, 17, 25,33, 34, 46, 47, 50, 51
04, 05, 13, 20, 29, 33, 40, 41, 49
I am busy with a very large dataset +-20 000 records showing the movement data
and I am having problem with inserting missing data: I have columns titled day hour and position, but multiple records for each as data was initally recorded by second. Data looks like this
Day Hour Position
1 2 Z5
1 2 Z5
1 3 Z5
1 3 Z4
1 16 Z1
12 2 Z3
13 0 Z3
What I need to end up with is a sequential dataset running from day 1 to 388 with hours 1-24 of each day. Positions need to be filled in for all data recorded (see above). The big problem is that movements between positions need to be recorded and accounted for i.e if more than >80 of time was spent at the position Z3 then that is the position for the hour.
As i am working on consolidating the Missing numbers manually, whether will it possible for making this automatic.
In Column "A" I have Multiple Duplicate Invoice Numbers and followed by the Different Transcation numbers in Column "B".
In Column "D" I have Each Invoice Numbers and in Column "E" Total Transaction Numbers i.e., no. of times each Invoice have Transactions.
In Column "F" No. of times we received the Transactions.
Here i need to manually need to update each Invoice's Missing Transaction number in Column "H" in single cell with comma separated to each Missing Transaction numbers.
Example:
Before : (Column "A" & "B")
Invoice NumbersTransaction NumbersInvoice NumbersTotal Transaction NumbersReceived Transaction Numbers
A2014000351501 A201400035150 3 2
A2014000351502 A201400035494 13 12
A2014000354941 A201400035881 12 11
A2014000354942 A201400035884 19 17
A2014000354943 A201400035888 14 13
A2014000354944 A201400037613 5 1
A2014000354945
[Code]...
Instead of doing this manually can we have the VBA to auto Update these missing numbers.
Here by i am attaching sample file.
I'm trying to program a spreadsheet for staff attendance at a school. In the spreadsheet the staff member has personal days, sick time, and sick time in the bank (sick time rolled over from last year). When they use sick time, it needs to come out of the bank first, until it reaches zero, then it should move on to the sick time accumulated for this year.
Staff attendance WIP.xlsx
On the left side is the staff name, sick time, personal days, and bank. Then are the school days for July (if a staff member uses sick time/personal day it is placed under the date it was used). On the far right is the total remaining amount that the staff member has left.
The formula I have for cell AF4 is: =MAX(0,G4-SUM(H4:AC4)) so that the cell will not go below zero.
The formula I have for cell AG4 is: =E4-(COUNTIF(H4:AC4,"P")+(COUNTIF(H4:AC4,"HP")/2)) So that when P for personal day is entered, it will take a whole day, and when HP is entered a half a personal day is subtracted.
I need to figure out a formula for cell AD4. I've tried a couple of formulas I've seen on other posts, but they weren't for a series of numbers like this. And when I put them into this particular spreadsheet, it would subtract the bank until zero, move on to the 'sick time' cell and subtract the SUM of all the days sick rather than subtracting what was left when the 'Bank' reached zero.
The series 1,3,6,10,15,21,28,36 ("A" series) is the ongoing sum of 1+2+3+4+5+6+7+8 ("integers") and naturally goes on for as long as on chooses. I am only interested in the numbers up to 100.
Is there an Excel function that will allow me choose any integer as a starting point and any higher integer as an ending point and provide the sum of the "A" series associated with the two choices.
For example: If I begin at 6 and end on 12 it would give me 308 =28+36+45+55+66+78
00
11
23
36
410
515
621
728
836
945
1055
1166
1278
1391
I have a list of data in Column A of a spreadsheet that is all at different lengths.
I would like to return the numbers from this (see below) seperately and also everything after the last number so returning "green"
Example:
EAST MIDS, YORKSHIRE0112012green
EAST MIDS, YORKSHIRE0112012red
EAST MIDS, YORKSHIRE0112013black
EAST MIDS, YORKSHIRE0112013brown
How can I subtract a series of numbers from an array. example.
Code:
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
13
14
25
26
37
39
[Code] ......
=ABS(1-B2) C2,D2,E2,F2 AND G and after start again with =abs(2-B2:G2)
I want to know how to do this for example until 60, I mean 60 minus the row B:G
I have a graph with something like 40 series that are being plotted. For one, I create non-standard data labels using VBA. In that code, I refer to ChartObjects(1).Chart.SeriesCollection(34). At some point I deleted a series that preceded it in the "select data" list and the code crashed. Took a lot of digging to learn that SeriesCollection(34) had become SeriesCollection(33).
To avoid this in the future, is there a way to refer to the SeriesCollection by a unique name rather than a sequential number?