I want to display the value of the next row or previous row when click Next/Previous button. For example when I click next, report number will be = 789, category = valid, issue = mobile, then reference = reference 3. What code to use?
Refer to the attached file for screenshots : Sample.xlsx‎
I have multiple check box (activex control). When click to first check box second should appear and linked to corresponding cell in column K. I did that manually
Is here the way to do tah using more complex
I've have been building a UserForm for data entry into a stock demands system. One of the data entry items is a text box asking the data-inputter to complete a field containing the items drawing reference from the technical manual. The field can be quite long, and is often repeated for multiple items within the same drawing. Unfortunately, a ComboBox item would be have far to many items to make it useful, and so the TextBox item was preferred for this task.
My problem is that I need the TextBox to be able to recall/remember previous entries that have been saved to the data sheet in the workbook and the UserForm is cleared and closed down.
I am using the following formula to show the first day of previous 6 month cycle.
=DATE(YEAR(TODAY()),MONTH(TODAY())-6,1)
That formula would display: 07/01/2009
I want to have another formula show the last day of the previous month.
Basically it would display: 12/31/2009
I have a number value in (e.g.) cell A1, and I want to display it in cell B1.
The number in A1 updates automatically from a website (and through a few regexp and other functions). Most of the time it displays a number, but sometimes it can be an error if for example the website connection doesn't work or something else is wrong.
I want to display the number of cell A1 in cell B1, but if the number in A1 is an error, I don't want to display an error, or a zero, or a dash, or anything of the sort you'd normally do, like =IFERROR(A1,"error"). I want to see the number there was in B1 before the error occurred. In other words I want to update the value of B1 only if there is a number to update with.
I created a textbox in excel, but i can't seem to do a right click, such as copy and paste..
I know that ctrl-C, and ctrl-V works, but the spreadsheet is mainly for non-tech savvy individuals,
Attached is an example of what I'm looking for. Example: Column A has all the month names with a defined named range of crnt. D6 has a data validation display with a value of Nov 09, I need E6 to display Oct 09 automatically from the data in Column A. Basically I need cell E6 to always display the previous months text based off cell D6. I think the example sheet explains it better.
View 2 Replies View RelatedIs it possible to copy data and right click paste it into a textbox on a userform?
View 5 Replies View RelatedIs it possible to copy listbox value into the textbox when double click....If the user select any row from listbox and double click on it onether userform will pop up and second column of listbox entry will load into textbox automatically.
View 9 Replies View RelatedI am using Excel 2003 on Windows XP, and I have created a form using several TextBox controls on Worksheets (not userforms). When I click on a textbox that has some text in it, the size of the text grows. Clicking away from it, and then clicking on it again causes the text to grow further. Repeating these actions ultimately causes the text to be so large that the contents are illegible. There is no VBA code manipulating the font in the controls, they are only set initially through the settings in their properties (all textboxes use the same font). The problem occurs on multi-line as well as single-line textboxes. In debug mode, I can see that the font.size has not changed from the initial setting of 9, so there is no manipulation of the settings. It looks like the control is being zoomed, as the size of the vertical scrollbar grows along with the text. Closing the file and reopening it doesn't resolve the problem. The textbox retains the size that it has grown to. This problem seems to happen on some environments and not others, and I have not been able to determine the cause or factors that contribute to this phenomenon.
View 5 Replies View Relatedfilling a textbox from a cell using a label click event. I have attached an example.
View 2 Replies View RelatedI have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
View 7 Replies View Relatedif there is a workaround to this issue. I have this code that transfers data to a textbox but it stops after hitting the character limit. Does anyone know how to extend this limit ?
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Cancel = True
With Me.Shapes("textbox1").TextFrame.Characters
.Text = .Text & Target.Value
End With
End Sub
I have below code for dısplaying ımages on userform and ıt Works fıne how ever ı have more then 1 Picture to show so how can ı unload the pıcture and Show the second one and so on
[Code] .....
End sub
I have an Excel Workbook with a worksheet containing around 5-6 charts placed side by side. When user clicks on any chart I want that particular chart to Zoom and come in the centre whereas the background must become inactive (Similar to how Picassa Photo Viewer works).
View 4 Replies View RelatedI am a very beginner in VBA Excel 2007
I have a textbox named textbox1, How should i write my command button code so that my textbox will display below message when button was clicked
Updates.
1 Dec Monday 10am @ abc swimming complex
Alibaba 12345678 Paid100.
Please arrange first lesson meet up with student.
-Microsoft
following on from previous post (http://www.excelforum.com/excel-prog...g-up-form.html) what if the selected cell is a merged cell (cell count is greateer than 1), what is the best solution to enable double click event on merged cell ?
View 2 Replies View RelatedSheet1
Upon clicking any cell in Sheet1, it will automatically filter based on cell A and B.
Sheet2
Automaticall display filtered criteria based on double click from Sheet1
For example: when I double click on C1, on Sheet2 will automatically diplay filtered data based on A1 and B1 and same thing goes to if I double clik on C2 on Sheet2 will automatically diplay filtered data based on A1 and B2.
I have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.
It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.
the line that reads this value is
Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value
Is there any wayt to set the ControlSource of a textbox on a form to display the largest value within column A?
View 4 Replies View RelatedAfter running advanced filtering through VBA like that:
[Code] ........
Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
i want textbox 108 to display the last entry from column A on worksheet MainSheet when textbox 6 is changed.
Private Sub TextBox6_Change()
Dim ws As Worksheet
Set ws = Worksheets("MainSheet")
Lr = Cells(Rows.Count, "A").End(xlUp).Row
UserForm1.TextBox108.Text = ws.Range("A2:A" & Lr).Value
End Sub
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
I have a cell containing a address. I have used alt-enter to separate lines of the address. I have a userform that contains a textbox which which loads the cell containing the address. The problem is once the useform is loaded the address in the textbox is all on the same line and contains a funny looking back the front P character where I have used alt-enter in the cell to make a new line. This ones got me knackered.
View 2 Replies View Relatedit is possible to populate a textbox (Userform_Initialize) with a predetermined range from a worksheet ("range" meaning " multiple cells"). I know you can set the ControlSource to populate the textbox using ONE CELL, but I don't know a way to do this with a range of data.
I've tried using the Value and Text properties, but no luck. I'm hoping to have the Userform Textbox populate automatically with a set of data when the Userform is opened. The data will always be 2 columns wide, but could be anywhere from 1 to 50 rows long. I've considered naming this dynamic range and then populate the textbox (somehow) with the named range. Can't figure it out and beginning to wonder if it is possible using VBA.
I have a userform for entering a sales invoice onto a spreadsheet, it obviously has a textbox each for the net value(textboxnet), gst tax(textboxgst) and total value(textboxtotal). How do I get the total amount textbox (textboxtotal) to automatically sum up as I enter the net (textboxnet) and gst (textboxgst) amounts?
View 4 Replies View RelatedI am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
When I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?