I have a cell containing a address. I have used alt-enter to separate lines of the address. I have a userform that contains a textbox which which loads the cell containing the address. The problem is once the useform is loaded the address in the textbox is all on the same line and contains a funny looking back the front P character where I have used alt-enter in the cell to make a new line. This ones got me knackered.
View 2 RepliesIs it possible to limit a text box to 6 lines (whether forced or automatically wrapped).
View 2 Replies View RelatedHow can I break this onto 3 lines in Visual Basic Editior to make it more readable:
MsgBox "Only enter data in white cells." & vbNewLine & "Yellow cells contain formulas or dates entered automatically", &
vbNewLine & "Do not insert blank rows. Copy row(s) and Insert/Paste" , vbInformation, "Spreadsheet by GJF"
right I have 5 columns
A
employee id
B
Date exposure
C
Total Exposure
D
First Name
E
Last Name
I want to be able to filter by employee id I'm using this formula below
=SUMPRODUCT(('Excel Exposure Grapth'!B$2:B$4000<>"")*(MONTH('Excel Exposure Grapth'!B$2:B$4000)=1)*('Excel Exposure Grapth'!C$2:C$4000))
but problem I'm getting it count all dates even after the data is filtered
For Example
if I had 2 employee's
EmployeeID 1 had 6 dates in January
EmployeeID 2 had 10 dates in January
if I was to filter to only show EmployeeId 1 it will only show 6 dates but the formula above counts everything even if filter applied
I am trying to display number of lines which depends on value pass by user. Actually user is passing some value. On which some group of lines has to be display.
E.g.
for 1 value 9 lines
for 2 value first 9 lines + another 9 lines
for 3 value first 18lines = 9 lines
and so on till 52.
In Excel VBA Userform, how to copy the text from textbox automatically when the cursor is being moved from the textbox. And when i put CTRL+V then the copyed text has to be pasted.
View 5 Replies View RelatedI have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.
It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.
the line that reads this value is
Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value
Is there any wayt to set the ControlSource of a textbox on a form to display the largest value within column A?
View 4 Replies View RelatedCode:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
Looking for a macro to insert a textbox with the textbox containing a formula rather then text.
Sub AddTextBox()
ActiveSheet.Shapes.AddTextBox(msoTextOrientationHorizontal, 2.5, 1.5, _
116, 145).Name = "Textbox1"
ActiveSheet.Shapes(1).Select
Selection.Formula = "=Manpower!R[3]C[1]"
End Sub
I tried this but I cant get the formula portion to work... I just want to insert a macro with that formula....
I want to display the value of the next row or previous row when click Next/Previous button. For example when I click next, report number will be = 789, category = valid, issue = mobile, then reference = reference 3. What code to use?
Refer to the attached file for screenshots : Sample.xlsx‎
After running advanced filtering through VBA like that:
[Code] ........
Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
i want textbox 108 to display the last entry from column A on worksheet MainSheet when textbox 6 is changed.
Private Sub TextBox6_Change()
Dim ws As Worksheet
Set ws = Worksheets("MainSheet")
Lr = Cells(Rows.Count, "A").End(xlUp).Row
UserForm1.TextBox108.Text = ws.Range("A2:A" & Lr).Value
End Sub
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
it is possible to populate a textbox (Userform_Initialize) with a predetermined range from a worksheet ("range" meaning " multiple cells"). I know you can set the ControlSource to populate the textbox using ONE CELL, but I don't know a way to do this with a range of data.
I've tried using the Value and Text properties, but no luck. I'm hoping to have the Userform Textbox populate automatically with a set of data when the Userform is opened. The data will always be 2 columns wide, but could be anywhere from 1 to 50 rows long. I've considered naming this dynamic range and then populate the textbox (somehow) with the named range. Can't figure it out and beginning to wonder if it is possible using VBA.
I have a userform for entering a sales invoice onto a spreadsheet, it obviously has a textbox each for the net value(textboxnet), gst tax(textboxgst) and total value(textboxtotal). How do I get the total amount textbox (textboxtotal) to automatically sum up as I enter the net (textboxnet) and gst (textboxgst) amounts?
View 4 Replies View RelatedI am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
When I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
I am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
View 4 Replies View RelatedVBACode for Calendar to display in Userform textboxWhat code so I use in order to have a userform1 calendar linked to a worksheet cell and then have the worksheet cell data displayed in another userform2 textbox?
View 2 Replies View RelatedI have a worksheet that I will enter in an age and gender ($B$5 and $B$6 respectively). Based upon these two criteria, I would like to display text in column H(Lower Limit) and I(Upper Limit), showing the norms for their health metrics, a few are below:
Metrics
Measured
Lower Limit
Upper Limit
Total Cholesterol
200
120
200
HDL
40
35
80
Glucose
90
90
130
So, as the user enters in the age in B5 and the Gender in B6 the VBA or formula would populate the cells with the appropriate data. I can get it to work with 1 condition using vlookup. Was thinking VBA might be useful there with the two criteria, just not sure how to code it.
I am new to VBA macros and trying to create display the searched items in the TEXT boxes for e.g
I have the data in one sheet as below.
Messgae CodeProgram NameError Description
asdsasdsqwewe
w987oiuhad2343
789ARU100Praveen Code
789ujiikluiooqwe
[Code]...
i have created one text box so that user enter the data to search by giving Message code. My concern is
From the example,
If the user enter 789 in the text box, and click on te search button( On user form) then it should dynamically create displays 2 occurance in each text box.i.e if the 789 found in 1 col then it should create 4 test boxesto display Program name data and 4 text boxes to display Error Description side by side. if not text boxes if will be if we display in lables also.
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
View 7 Replies View RelatedI want some code on how to fetch data from an Excel Database and display it on respective textbox.
Like I have these coloum name in excel sheet; Emp Id
Name
DOB
Dept
Reporting to
Transport req.
I want to have VBA code to fetch it on txtbx1, txybx2 and so on.
I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies View RelatedI have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
I have an automated formula which i have to fill down to line 250, yet in the majority of cases i only need it to say line 20, and as a result i have loads of lines stating "Not Found" has anyone got a way to hide any lines containing either "Not Found" or a blank cell??