I'm trying to get excel to display a quote, plus a cell's text/value... the problem I am having is that the format is a date, and it ends up showing something like 37896 instead of 11/25/2008 (those are examples, not actuals). Here's the
View 3 RepliesI would like to write a function that enhances conditional formatting capabilities in this way: suppose that cell(4,5) contains a number that can be 0 to 5
in the adiacent cell(4,6) i want to put a function that:
1) write "NO DATA", "HIGH", "GOOD", "MODERATE", "POOR", "BAD" depending on that value
2)Choose color font depending on value
3)Choose color background depending on value
I wrote this piece of
Public Function StatusResponse(AdiacentCell As Range) As String
Dim thisStatus As String
Dim ThisFontColor As Integer
Dim ThisbkColor As Integer
Select Case AdiacentCell.Cells(1, 1)
Case Is = 0
ThisbkColor = 2
ThisFontColor = 1
StatusResponse = "NO DATA"............
I have a file that uses dates, when a cell is in date the cell is "GREEN" but when the cell is out of date after 3 years it turns "RED". I want to add another formular so that when it gets to 2 years & 11 months the cell will go "YELLOW" for 1 month only before it turns "RED".
View 3 Replies View RelatedCell A1: International Studies Academy (P) 9-12
Cell A2: Public
Is there a way that I can get Cell A2 to fill red when cell A2="Public" and A1 contains "(P)"?. I can't seem to get a formula to work yet.
I have the folowing criteria :
1) If “Completed" , then highlight as green
2) If “Pending” , then highlight as red
3) If “In Progress” , then highlight as blue
4) If “X Required” , then highlight as green
I need to include in the third conditional formatting box that if the cell populates "Completed" or "X Required", then highlight as green. Is there a formula I can use in the conditional formatting box ? I am using Excel 2000.
I can't seem to find out how to use wildcards like "?" and "*" in the VBA- Replace("string","s*r","k") which should give "king"
View 3 Replies View RelatedLook at the tab "testing-allproduct" cell C2. If that value exists in the tab name "store-allproduct", cell c2, then take the value from "store-allproduct" cell a2, and put that value into "testing-allproduct cell" A2.
View 2 Replies View RelatedIn column A, I have the following values:
build
chil rat
datcen
mang
nextg
ost rat
omp
sco rat
In column B, I need the formula so it shows values that if column A = "build", "nextg" or "datcen", then the value in column B is "nextg" and if column A = "chil rat", "ost rat", "sco rat", then the value in column B is "mig". For everything else, it should be blank.
I have two worksheets, one with "supplier names", "order numbers" and "delay in days" as columns. The other one with "supplier names" and "average delays" as columns.
It is the column "average delays" that I have issues with, I need Excel to search the "supplier names" column in the "delays" sheet and identify every specific supplier name, connect the delay in days for that order and calculate the average delay in the right cell of the column "average delays" in the sheet "delay statistics".
I have tried the help files and to search this forum but I have found nothing. I have also with my knowledge tried a few different ways using the IF function but nothing so far.
This is something I started doing but it is of course far away from any truth.
=IF(;Delays!B1:B200="Greber")..............
This is the "delays" sheet where I want to find my info. Nothing in the delay column stands for "no delay"...Kinda obvious but you know... So even the "nothing" needs to be included in the calculation..
tell me which operator works in VBA the way the OR operator works in functions? I want to write an IF statement that will evaluate whether a variable is equal to any of the three punctuation marks ".", "?", or "!". But I'm not sure how to code it. I attempted the following:
View 2 Replies View RelatedI've got two lists - (text, but could be converted to number if easier - they're course codes which start with letter, but I could drop that). I need to take each value from the longer list (c. 900 items) & see if it occurs anywhere in the shorter list (c. 600 items) & to return a 1/0. It struck me that I should be using some form of nested "if" statement, but the actual logic required is a bit beyond me.
Most of the functions seem to require an array to match against - and as far as I can see, I have to enter that array, I can't use a column to form it. I did try VLOOKUP - but that seemed to want me to return a value that it found in a different column - so I added a column of 1s. At the moment, the two columns of numbers are on different sheets. I've got Office 2007 here, but have 2003 at home, if it works better in that.
I am up against the clock, and I need to know how to display in a cell "Yes" or "No" based on a value being (or not) in a column. I have column A with values, and I want column C to show Yes/No based on if value x from say A2 exists as a whole matched valued in B2:b3000 and set c2="Yes" if it is, and no if it isn't.
View 4 Replies View RelatedThe formula I have checks for these conditions:
- to see if there is text is cell C221, and if there isn't then the target cell remains blank. (Working).
- if there is text in cell C221, and cell G221 is empty then the target cell should say "No". (Broken! Returns 'FALSE' value instead of "No"...)
- if there is text in cell C221, and cell G221 contains one of the 5 criteria, then the target cell should say "Yes!". (Working).
Here is the formula - how do I fix the broken bit?
=IF((C221=""),"",IF((G221="Condition 1"),"Yes",IF((G221="Condition 2"),"Yes",IF((G221="Condition 3"),"Yes",IF((G221="Condition 4"),"Yes",IF((G221="Condition 5"),"Yes"))))))
I was hoping that there might be someway to "build" cell references by concatenating two cells together. Let's say I type "Apple" in cell A1. In two other cells, I write "A" and "1" - I'd like to concatenate those two cells together so that they reference what is in cell A1; I'd like the concatenated cell to say "Apple", but I can only get it to say "A1".
I tried it with three cells, ones that say "=", "A", and "1", but it still just concatenates them as "=A1", instead of saying "Apple". I've attached a workbook to illustrate my point.
I am trying to make a simple program that will go down column A deleting the rows until it meets a cell with the word "Date" in the A column. When it has found that row I want it to delete that row also and then stop.
This is what I have so far
Sub FindAndDelete()
Dim row As Integer
Dim col As Integer
ActiveSheet.Range("a1").Select
If Range("a1") "date" Then Rows("1:1").Select
Selection.Delete
End Sub
I tried defining row =1
col = 1
and then going if range ("rowcol") but no joy.
In my spreadsheet below I want to be able to enter a sales number for January, the value of cell F2.
I want cells F3 thru F12 to automatically calculate according to the "Growth Per Month" value in cell H1.
Example: If January sales are 20,000, then February should calculate to 21,000 (january * 105%).
Excel Jeanie HTMLSheet1
E F G H 1 2010 Per Month Sales XXX 5% 2 XXX XXX 3 February $ 10,000 4 March $ 5,000 XXX 5 April $ 2,500 6 May $ 1,250 7 June $ 625 8 July $ 313 9 XXX $ 156 10 September $ 78 XXX 11 October XXX 12 November $ 20 XXX 13 December $ 10 14 $ 39,990
Spreadsheet Formulas Cell Formula F3 =F2*10*H1 F4 =F3*10*H1 F5 =F4*10*H1 F6 =F5*10*H1 F7 =F6*10*H1 F8 =F7*10*H1 F9 =F8*10*H1 F10 =F9*10*H1 F11 =F10*10*H1 F12 =F11*10*H1 F13 =F12*10*H1 F14 =SUM(F2:F13)
As shown in the below image. I have some data from A13 to I 13. Currently if I put the cursor on A13 and press DELETE button then all the formatting from A13 to I13 goes off. But the data still remain there.
Is it possible then when I press DELETE the content of A13 then all the data from B13 to I13 should also get deleted ?
Excel Jeanie HTMLSheet2 *ABCDEFGHI13Key FieldEmp 11 2 4 8 5 3 7 Excel tables to the web >> Excel Jeanie HTML 4
I'm trying to use an "IF" statement to look at a date in a cell and if it matches the criteria return the information from another cell. I have tried several different ways and constantly receive an improper "FALSE". Attached is a simplified example. I'm sure it's a simple soultion.
View 4 Replies View Relatedi just tried the below formulae but its not working. if Currency in col A and Currency col B is same it should be "Matched" if not same the "CCY Mismatch" and if "#N/A Sec" then "Security Not Found"
View 3 Replies View RelatedI need to prevent users from entering several rows of data seperated by a "/" or a "," or a blank space ""
We use unique identifiers (around 500,000 of them) so I cant really use a drop down box to populate and then make the user select.....
If a user populates a cell with "10005486 / 10045446" or "10005486,10045446" I want to highlight a cell red and then count the instances of red cells on another tab so I can track "errors"
I was intending to use conditional formatting when a "/" or "," or " " is used within a cell. If a user makes this error, I should probably include a msgbox saying why the entry they have made is invalid also....
I am trying to have a cell in sheet "Summary" count the number of cells in column DX of sheet "Analyses" that are greater than 0, provided that the value in column A of "Analyses" corresponds with the value in B8 of sheet "Summary."
(In "Analyses," there are 106 subjects, each taking up 64 rows. So, columns 1-64 correspond to Subject 1, columns 65-128 correspond to subject 2, etc. In column DX, each subject has 64 values that are either 0 or greater than 0. In "Summary," each subject has one row that summarizes the 64 trials. I want a single cell in the "Summary," sheet to reflect the number of times each subject produces a value greater than 0 in column DX of "Analyses.") I tried using this formula, but it did not work correctly:
=COUNTIF(IF(Analyses!$A$1:$A$10000=Summary!B8,Analyses!$DX$1:$DX$10000,""),">0")
(Summary!B8 = 1, so I am trying to calculate the number of values in DX that are greater than 0 only for subject 1.) When I press enter, this yields a value of 384. This is impossible, given that subject 1 only has 64 possibilities of yielding a value greater than 0. Subject 1 has 2 values in column DX that are greater than 0. I tried making this an array formula by pressing Shift+Ctrl+Enter, and that just gives me a #VALUE! error.
I'm having issues with sumproduct. I can't seem to get the right info that I need. Attached is the file I'm working on. Problem: I need to get the number of people "Occupied", "Partly Occupied" and "Available" on a Monday, Tuesday etc of the current week. "Occupied" means an employee has more than 2 tasks (based on New and Active-To-Date status). "Partly Occupied" means an employee is working on 2 tasks.
"Available" means an employee has NO task at all.
I have attached an example workbook to this message, with the sensitive data removed. I am trying to vlookup the "cube" for the product number, into the PO worksheet, IF the vendor numbers match.
Example:
On row 2 of the "PO" worksheet, part number AC1000110, should have a cube of 2.5 for vendor # 11170. I'm trying to match the "Vendor" on the "PO" worksheet with the "Vendor" on the "Cube File" worksheet, and then return the corresponding "Cube", (in column F of the "Cube File"), in cell U2 of the "PO" sheet. So, what formula needs to be entered in cell U2?
See the attached example spreadsheet which will make this much easier to understand. I want to create a formula in the second worksheet that says "If cell A1 of sheet 1 = "a", Then i want to put the contents of cell B2 ("flour") into cell A1 of sheet 2, I want to put the contents of cell C2 ("egg") into cell B1 of sheet 2 and I want to put the contents of cell D2 ("sugar") into cell C1 of sheet 2. If not put 0.
View 3 Replies View RelatedI need to formula that does the following. If Cell A1 or cell B1 value is greater then 175 then "on", if not then "off"
View 5 Replies View RelatedI have cell values of 1,2,3 etc that are used with other formula on a worksheet. However I would like these cells to display the format of 1st, 2nd, 3rd, 4th etc without any month or year values.
View 2 Replies View RelatedI am having problems referrring to a range using .Cells
If I try to use the remarked code (red text), it crashes with VBA "400" error for which I cannot find any explanation. It also crashes with same "400" message if I use a cells reference to a numeric column instead of "y").
The code works using the black it loops a column in Sheet("Holidays") and loops a row in Sheet("Schedule"), then color fills 2 ranges in columns in Sheet("Schedule") when the values in 2 cells are equal.
I have attached a scaled down version of my Workbook with this code.
I need "PC" to show up if I type a sentence containing "Called Parent", "Called Dad", or "Called Mon". Here is what I'm trying.
View 2 Replies View RelatedI have a procedure that processes data in a spreadsheet. It analyzes data in 365 sheets ( named "1" through "365") and creates a table/report with the results. When I run this on a scaled down version of my workbook (5 instead of 365 worksheets), the result is almost instantaneous. When this is on my normal workbook, the initial processing is about 1 second per day on Day 1, and the last day it speeds up to almost be instantaneous. It is not a linear relationship between the processing time (still working to get more exact timing information). Also, even if I limit my processing to 5 or 10 sheets, Days 1-10 are always slow and days 350-365 are always fast. The code being run is in the structure as shown below:
numSheets = 365
For counter = 1 To numSheets
x = CalculateSomething(counter)
Next
Private Function calculateSomething(counter As Integer) As Integer
Dim strCounter As String
strCounter = counter
With worksheets(strCounter)
For i = 0 To someNumber
For j = 0 To someDifferentNumber
'Data analyzed on worksheet
Next
Next
End With
End Function
The functions obviously aren't copied and pasted/functional, but the relevant efficiency stuff should be there.
I want to replace all defined range names in the sheet that start with "Street" to "Road"
For example I have 50 defined names in the sheet as such "Street-01", "Street-02"... all through "Street-50"
I want to change them all in vba to Road-01", "Road-02" etc.