I am up against the clock, and I need to know how to display in a cell "Yes" or "No" based on a value being (or not) in a column. I have column A with values, and I want column C to show Yes/No based on if value x from say A2 exists as a whole matched valued in B2:b3000 and set c2="Yes" if it is, and no if it isn't.
View 4 RepliesExample:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I have two bitmap images, and I would like to show only one image at a time, based on the content of another cell's pull-down list. If the user selects "AIR", then display the AIR image. If the user selects "SERVO", then display the SERVO image.
View 2 Replies View RelatedDepending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedI have a map of the US composed of 50 shapes (one for each state). I need each shape to appear or disappear based on a value in a corresponding cell. I can't use VBA for this as it needs to function for users in a high-security Excel 2003 which doesn't allow macros.
View 1 Replies View RelatedI have found Displaying an image based on text contained within a cell. which appears to be a very similar question, but no steps to follow.
Basically I have a folder with around 300 images in it, each is called ProductId number.jpg
eg Z99S1234567.jpg
In my sheet I am using the same ProductId number and would like to display the product image on the sheet. I have A1:D19 as spare space Lookig at the info I have found the image will have to go into a cell, so can I break all the rules and merge cells to fit the image in, or do I need to make a single cell big enough or can I use VBA to import the image somehow to a specific place on the sheet.
There will only ever be one looked up image on the screen at a time.
I'm trying to display a different image based on the contents of a cell. For example if cell A1 = "Gerrard" I would then like to display a picture of Steven Gerarrd. Is this possible? If so can anyone give me a steer in how I might acheive this.
View 3 Replies View RelatedIs It Possible To Embed Pictures So That When I Do Lookup A Code It Then Shows Me The Picture Of What It Is Im Looking For. Ie If I Was To Type In Kettle It Would Show Me A Picture Of A Kettle In The Next Cell?
View 3 Replies View RelatedI want A1:A400 to display in B1.
View 6 Replies View Relatedi want textbox 108 to display the last entry from column A on worksheet MainSheet when textbox 6 is changed.
Private Sub TextBox6_Change()
Dim ws As Worksheet
Set ws = Worksheets("MainSheet")
Lr = Cells(Rows.Count, "A").End(xlUp).Row
UserForm1.TextBox108.Text = ws.Range("A2:A" & Lr).Value
End Sub
My is updated very frequently and i just wonder if it is possible to display the last filled cell of a certain column in another cell.
Imagine column B (B5:B1253) is filled with average sales values by using formula "B$5:B5" and i want to display the most uptodate average value in cell B1.
I have the months in a drop down menu January to December in cell B1.
Is there a way for excel to display the dates in that particular month based on the selection in cell B1?
For example, if I were to select "February", I'd like Excel to display:
02/01/2012
02/02/2012
...
02/29/2012
in cells A5 through last day of the month?
I have a combobox that returns me the names that are in a spreadsheet.
I need a return label, the index (address of that cell that the combobox returned), how do I do that?
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.
I have one collum with number ranging from 0-1000 in. I have another collum titled "above 90".
How do I get the "above 90" collum to display as 1 if the number in the other collum is above 90?
I understand it must be some kind of "COUNTIF" function but not sure...
Is there a function/routine/etc. that when I scroll over a cell that I can display the name from the row along with the date from the column. (I know I can do it if I click the cell.)
Objective: Once I zero in on the desired cell I click it to schedule the person to work, count their hours, add to weekly and monthly totals, etc. etc. etc.
Been doing pretty good up till now but I can not figure out how to get a combo box in the first blank cell of column A. I am using the named range 'Units' and there are almost 900 of them so I need the combo box.
View 8 Replies View RelatedI am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
I have two columns, column Q and R. Column Q has Data Validation set, where you can only choose one of four options in any given cell between rows 2-250,000. When "Complete" is chosen, the cell turns green. Now when "Complete" is chosen in column Q, I need the cell next to it in Column R to auto-fill today's date. However, the date should not update to the next day. So if the cell autofills to today's date, which is 12/6/13, tomorrow, when the date changes to 12/7/13, the cell still reads 12/6/13.
View 4 Replies View RelatedI'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies View RelatedI have several columns (d,o,z,ak,av,bg) where I enter material numbers - there is approximately 180 different material #s. Columns (f,q,ab,am,ax,bi) are empty and designated for text/comments entry. Some material numbers need to have specific comment displayed - there is approximately 25 material numbers and each one has different comment attached to it. I need to display these comments automatically without user interaction. Material numbers change weekly and are in rows 5:130 in their respective columns (d5:d130,o5:o130,..etc)
This would be easily achieved with formulas in columns (f,q,ab,am,ax,bi) but I can't use formulas as these may be overwritten. Any thoughts of how to do it with VBA?
EXPENSE MASTER 2013 sample color.xlsx
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I have a Worksheet were I have a formula in cells from D5 to ALO5. That read "Hide" or "Unhide".
I would like the column to each hide individually hide if that column has "Hide" in in it. If it has "Unhide" in the column then it becomes visible again. The range of the columns match the formula cells which are "D" through "ALO".
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))