I am attempting to duplicate data from the first cell in each row in Sheet1 to the first cell in 6 rows in Sheet2.
I want to do this for each row in Sheet1. For example, I want to take cell A1 from Sheet1 and copy what was in that into Sheet2 into cells A1-A6. Then I want to take A2 from Sheet1 and copy what was in that into Sheet2 into cells A7-A12.
Is there an easier way to go about doing this? I have too many rows in Sheet1 to do this by hand.
Edit: I know the formula for getting a value from Sheet1 and put into Sheet2 cells A1-A6: =(Sheet1!A1)
I have two sheets, they basically contain shifts. They are laid out identically the only thing that changes is the date along row 1. In order not to have to recreate the workers from sheet1 onto sheet2 I use the following
How to open a fresh workbook and have information automatically being pasted in, based on a checkbox trigger. I don't know if I have explained well or not but essentially it is this:
W5 is the checkbox with a tick and a cross. When the cell is ticked I want to specicy cells on this record to be brought over to another tab.
I am trying to copy two cells from one worksheet to another in the same work book based on the value in Column B of one of the sheets. This is just a building block to a larger script I am going to create.
Below is my attempt but I keep getting an error at Range(Cells(x, 3)).Select.
Is there a simple way to duplicate a number according to a given value? For example, i want the input to be 8 and the number is 1 so the output would be 11111111.
I've been given an excel file with 75 addresses (1 address entry per row) and I have to make 150 copies of each address while also numbering column D for each row 1-150.
So in the end it would go from: (sorry for the periods.. extra spacing didn't work!) A........B................C.......D AAA...123 Street...City...<blank> BBB...456 Street...City...<blank> CCC...789 Street...City...<blank>
I don't mean to be lazy and just ask for a macro code, but I'm a complete excel novice and just looking for a quick and easy fix rather than copy/pasting these entries manually.. edit: this file has a deadline for it, which is the reason for the quick fix not to just get out of learning how to do it
I've tried to make a macro consisting of inserting a row, copying a row then pasting it, but that only worked for the first row that I'm duplicating.
I am trying to make an inventory cover page - that shows data of separate products on different sheets with the following;
Product Date Previous Total Amount Taken New Total and occasionally there is a Re-issue of stock to the previous total.
This is at the moment an historical record as anyone can see the usage across the dates for any particular product by looking at the sheet. Each time there is a change to the inventory it is recorded on a new row. But what I am trying to do is to copy the last row of data from each sheet to the cover page to show an overall inventory.
The part where I get stuck is making the selection of the last entered row of data [from each sheet] automatically updating the coverpage, when each sheet will get new data added frequently.
I thought about somehow making a duplicate of the last row and locking it in place and linking that to the coverpage - but I still do not have a clue on how to get it to automatically select the last row of the data.
I have attached a spreadsheet here showing when people have had squash coaching. What I would like to do is have a summary section at the bottom showing how many sessions each person has had throughout the month, at which club. So where a club code such as the "C" "N" or "NO" is used I would like to insert the person's name in the summary section at the bottom. If the same person's name occurs again I would like to simply (that's the hard bit for me!) use one cell to continue to count his number of sessions - rather than duplicating his name over and over in a list, as would be done by using COUNTIF. I'm well lost on how this might be done but am sure that it must be possible?
I am in need of duplicating a current workbook for others use such that when I update information in the original all those who have a copy of the duplicate will get the updates I have made. I have searched all over for linking workbooks together and I am familiar with linking cells and other small bits of information from other workbooks but in this case I want a duplicate workbook that is updateable from my source workbook.
I'm creating a KPI spreadsheet which utilizes named ranges to allow for Dynamic charting. I've created the first data input sheet for one of the 10 areas being KPIed. The sheet has 60 named ranges in it.
The goal is to duplicate the existing sheet (Area 1A) 10 times and adjust the named ranges and formulas within the named ranges according to the sheet names.
Is there a way to accomplish this without having to manually recreate or edit every named range for each new sheet?
I'm trying to automate some documents we use on a regular basis so that we don't have to re-enter the same information over and over again. Basically I can get some cells to work and some will not. My first sheet is a contract. So I want Customer and Contractor info to show up on the rest of the sheets. I'm assuming something is messed up in the formatting of the cells but I can't figure out what.
So on my Job Book Cover Sheet I first want the GC's name and the code =Contract!G8 works perfectly. In the cell just under this one I want the Customers Name, but =Contract!C8:D8 (the cells on the contract with the Customers Name) returns #VALUE!
That said, the code =Contract!C8:D8 on my project detailer sheet returns the customer name like I want it to.
The following code was supplied by Bill, but I want to do the same thing in B10:B164, where "x" is entered in B10 and the time stamp is entered in C10 & D10. I tried copying the same script but had an Compile error message which said Ambiguous name detected: Worksheet_Change. The name of the sheet is Sheet 1 (Main)
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Cells.Count > 1 Then Exit Sub If Not Intersect(Target, Range("M10:M164 ")) Is Nothing Then 'change your range on this line" If Target.Value = "x" Then Target.Offset(0, 1).Value = Now Else Target.Offset(0, 1).Value = "" End If End If End Sub
I have a worksheet (Morning Reports) that has a running macro on what I need is how do I get this same code to work on a different sheet titled (Afternoon Reports) This afternoon report will be a scaled down version with slightly different range:
How do I modify this code to do the same thing just on a different sheet
[Code] ....
Protection password is "Financial3" and sheet and VBA
Attached File : New Morning Report - Master_Copy-NO DELETE.xlsm
Im replicating rows which have multiple items in Column1. Im aware that the ID Column has duplicates..my source data is like that for now so I wont complicate it just yet.
Once ive got this working I can proceed to the rest of the tasks
As a simple example, I have three columns (A,B,C). In both Column A and B they have single word text in them, but in Column C it is a paragraph of words that I format the cells to 'fill' so that it is all tight and concise when viewing the worksheet. Afer I have saved the document and have closed it when I reopen the document. Cells from column C have randomly duplicated themselfs throughout the entire worksheet,but only onto columns A,B,C (where there is pre-existing text). As the random cells get duplicated it overrights the original text (results) as it does it, so once I open up a document and see this it is to late. this is a continual problem that I cant find a resolution for.
(Excel 2007), I have a template that I need duplicated for every reference. My Worksheet lists all the references and the macro use to duplicate a worksheet for every reference in the worksheet. The problem is when duplicating now, it duplicates the name of the template. For example, when the macro is ran sheet1= Template(1), sheet2= Template(2) ect.
Here's the code- I think it has something to do with the named ranges
Code: Sub Macro1() For i = 1 To Application.WorksheetFunction.CountA(Worksheets("Worksheet").Range("A:A")) Sheets("Template").Select Sheets("Template").Copy After:=Sheets(Sheets.Count) Sheets(Sheets.Count).Name = Worksheets("Worksheet").Cells(i, 1).Text Next i End Sub
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
I am currently trying to add some functionality to an Excel workbook and I have a combo box that I am unable to get the values to populate. On the same worksheet I have a command button. Here is the code I am using to attempt to populate the combo box:
Private Sub cmdSendSave_Click()
Call SendSave
End Sub
Private Sub bxLocation_Change()
With bxLocation .AddItem "Mt. Hope" .AddItem "Summersville" .AddItem "Huntington" .AddItem "Pulaski" .AddItem "Coastal Bend" .AddItem "Odessa" .AddItem "Wheeling" .AddItem "Hollywood" End With
I tried to search the forum for my unique problem but had no luck. As you will see attached, I have a series of excel buttons I need to duplicate and have target a different set of cells. I am hoping there is a way to avoid manually doing this.
The goal of the document is to push the button when both colours in the row and column interact (research on birds). There are two additional behaviours with an exact same set of buttons but they need to target "Body Rush" and "Food Displacement" tables underneath. I need all the buttons on one page since multiple behaviours happen simultaneously that need to be recorded.
I have something like 100+ modules in VBA I have created, I am hoping there is an easier way to do this so I don't have to create another ~200 modules in order to get the last two behaviours setup.
I am hoping there is either an easier button system or way to make buttons adjust somehow.
It is for a calibration spreadsheet that I run that keeps track of when items are due to be calibrated.
It works at the moment and has populated my outlook with calendar entry and reminder 2 weeks before they are due - which is perfect.
The problem is when I update one of the calibration dates I will want to re-run the macro to create a new appointment - but this will duplicate all the appointments that already exist! very annoying since there are over 200 items.
Sub outlook_appointment() Dim olApp As Outlook.Application Dim olAppItem As Outlook.AppointmentItem
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
I have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.
The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.
I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.
I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
The data from the Data sheet is copied over to the Report sheet with formula.
Basically, what I need to do is If statement: -when there is no any data in csv file (so the Data sheet will be empty); -the range (A7:N1000) to be hidden (on the Report Sheet) -the Report sheet to be saved
and also...
I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report.
Option Explicit
Sub Update_Report() ' ' Macro1
Dim extract1 As String Dim dReport As String Dim rSheet As String Dim dSheet As String
