I do hav a sheet in which i do hav some column;s n data
Worktype
Metrics
April
May
June
in work type few rows are hidden which i don't need what i need is i want to populate only comman metrics in other range named metrics i had build a macro for this and that's working fine but the problem is it also reads metrics from hidden rows too. i had tried a loop in which i had placed as hidden column property condition.
I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).
There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.
This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.
Code i currently have is:
[Code] .......
I just need it to now go across 10 visible columns and set as a single print area.
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI have a text file that I want to read the data into a sheet and split and store into columns.
The format of the textfile as follows (Only two records will contain 200 with line break to seperate):
Atom "file" contains: C:B_200801142021_VIDEO_BOYS_EVENTS_FIRSTBIRTHDAY@Video Title 1.mp4
Atom "©nam" contains: Video Title 1
Atom "purd" contains: 200801142021
Atom "keyw" contains: VIDEO_BOYS_FIRSTBIRTHDAY
File "F_©nam" contains: Video Title 1
File "F_purd" contains: 200801142021
File "F_keyw" contains: VIDEO_BOYS_FIRSTBIRTHDAY
I'm trying to find total gross commission within a spreadsheet, where gross commission found in Deals column Q. Columns T & U indicate with an "X" whether the deal was associated with referrals and such.
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$T$2:$T$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
=SUMIFS(Deals!$Q$2:$Q$500, Deals!$U$2:$U$500, "x",Deals!$C$2:$C$500,">=1/1/2005",Deals!$C$2:$C$500,"<1/1/2006")
But now I need to sumif Q2:Q500 excluding rows where "X appears in either T or U, or both, to indicated complete self-generated deals.
Is it possible to make Columns Read only? So not one can type or edit. Not all columns just the ones I need
B,C,D,I,J
I want to make some of the columns read-only (user cannot edit any of these cells).
View 2 Replies View RelatedI have got several columns of data with subtotals, months, total unit per month, total sales per month, Example
jan feb
total unit total value total unit total value
60 £600 35 £180
SOLUTION
dateunitsale01-Jan6060001-Feb3518001-Mar335801-Apr911220
I am having to use = sign (=A10 --) transfer the information to solution, is there a formula that I use instead. I have try $A10,A$10 to ancher the column?. ideal I need formula that read alternative columns for date, unit and sales- that I can copy down?
I have a userform with a bunch of textboxes that read from certain rows/columns/etc. However, when I hide certain columns (I need them hidden) the textboxes don't display the data (it only displays when the columns are not hidden).
View 2 Replies View RelatedI would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
View 3 Replies View RelatedIs there way to do this? I did not find it.
View 5 Replies View RelatedI have a worksheet that has several hidden columns and wish to have the EntireRow.Autofit apply to all rows in the current region based on visible columns. After using the WrapText method on all visible cells, one of the hidden columns with a lot of characters causes the entire row to be much larger than desired. Is there a way to use EntireRow.Autofit to only expand the height of each row in the current region as necessary based only on the visible cell contents in that row?
Set AllCells = ActiveCell.CurrentRegion
ActiveCell.CurrentRegion.Select
With AllCells
.Font.Size = 6
.Font.Bold = False
.WrapText = True
.EntireRow.AutoFit = True
End With
Starting from D6 to the end of the data (could be F6 or AA6) I need to sum the total, but only if the column is visible.
View 9 Replies View RelatedI am looking for a bit of code that will count the number of visible columns either. I have the following which is missing the code to establish if the range is visible or
Code:
Do Until rngVisibleColumnCount.Column = Range("HRISData_RoleError").Column
'Code to establish if visible
intVisibleColumnCount = intVisibleColumnCount + 1
Set rngVisibleColumnCount = rngVisibleColumnCount.Offset(0, 1)
Loop
In the code below, I found out how to make the column widths automatically adjust on a worksheet based on the text entered. This code works great but it also reveals the hidden columns on the worksheet. Can i prevent it from doing that?
Private Sub Worksheet_Change(ByVal Target As Range)
With Me.Cells
.Columns.AutoFit
End With
End Sub
Found here: Automatically Adjust Row Height & Column Width
I am trying to create a daily task activity sheet. I would like to know, how to make the columns visible and invisible as per the selection from previous column.
For eg:
Column A has a list which has values 'TC creation' , 'TC modification', 'System Test' etc.
Upon selecting TC creation, i need to make a column visible ie 'total tcs created'.
Upon selecting 'TC modification' i would have to make the previous column invisible and make a new column visible for entering no of tcs modified.
Upon selecting 'System test' the other columns should go invisible and make other 3 columns visible for no of tcs executed, no of tcs passed, no of tcs failed etc...
I have filtered a worksheet and want to only total the data in the columns that are visable, is this possible?
View 4 Replies View RelatedIn a Worksheet named "Input" and in Cells "B3:G?" I have 6 number groups. How can I ...
( 1 ) Put each of the 6 number groups into an array when I don't know what the last row number is.
( 2 ) Find the maximum value in any of those cells and attach it to a variable named MaxVal.
... so once I have done this I can then loop through each 6 number group and perform some calculations.
I have an Excel sheet with all client information...For clinical supervision I want my team members to open their own "Supervision.xls" and click a button...this button will open "Client.xls" and select "Client info sheet"...It will then hide rows c,d,g & f...it will then filter column "e" based on the specific caseworkers name ( say "Joe") and copy only the visable columns back to their "supervision.xls" Values only (doesn't effect the colour formating of Supervision.xls) then close "Client.xls"
how do i set the macro to read a range without limitation?
currently i have a recording macro that only reads to P126 - if i end there data in C127:N127 I would like the macro to recognized that there is new data and update to P127 with the new calculation....
I am trying to write the contents of a worksheet to a notepad file. Also, the worksheet has some hidden columns.
I'm looking for the row and column number, or number of rows and columns, that are visible in activewindow. Activewindow.visiblerange.row, .column (and .Scrollrow, .Scrollcolumn) are nice but
I prefer not to perform division on pixel height; I'm looking for some count or rowcount but I haven't been able to locate the object.
I'm trying to open a file on a network drive...but I'm getting the following error message when it opens: "This file may be read-only, or you may be trying to access a read-only location. Or the server the document is stored on may not be responding." Now, the file itself has no rights restrictions and is not read only. It doesn't appear to be locked.
Now, there are other Excel files in the same directory which I could open fine; however, the Excel documents having the above problem all have a little black icon "appears to be a padlock" (image attached) at the bottom left hand side of the Excel file icon. I tried the following:
- Renaming
- Converting to a different file format (didn't work, it won't let me)
- Opening in notepad...etc doesn't work.
This file is dated back in 2004...do you think it's corrupt? Is there anything i can do to open or recover this?
code to pass a range say (A1:A3) as an arguement among other arguements to a custom function and then reading this as an array inside the custom funtion
View 4 Replies View RelatedIs it possible to populate a multicolumn listbox while excluding the hidden rows?
View 3 Replies View RelatedI have a macro solved on another post that creates worksheets based on a Range and renames the new worksheet to the corresponding value. The range is edited on a regular basis, so to keep the file size down I need to remove any worksheets that no longer have a corresponding ID in the range.
The previous post is here
HTML Code:Â
Sub CreateTimeline()
Dim rng As Range
Dim rCell As Range
[Code].....
I'm sure that I could amend the above code (also removing the copy worksheet condition) to check the worksheets and delete any that no longer have no corresponding value in the range from the worksheet name.
I am trying to create a range with visible cells after filtering based on a criteria. But, facing some wierd problem with setting correct range with visible cells. Here is the code.
Code:
xlsDynRange = xlsWorksheet.Range("A1:G500")
xlsDynRange.AutoFilter(Field:=1, Criteria1:=intEmpid)
xlsFilteredRange = xlsDynRange.Range("A1:G500").SpecialCells(Excel.XLCellType.xlCellTypeVisible).Cells
Here, xlsFilteredRange.Cells.Count returns correct values. For example, for a particular filtered criteria, if there are 6 rows, it returns 42 (6 rows * 7 columns). However, xlsFilteredRange.Rows.Count always returns 1 (header row), though there are 6 rows. How can this be fixed?
I'm using a named range called "VFILTER". This range is my filter range. Once the filter does it's thing, I want to set the first visible cell in column a to a variable...I can't get this right for the life of me!
With Range("VFILTER")
.AutoFilter
.AutoFilter field:=25, Criteria1:="DELETE"
.Offset(1, 0).Resize(. CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible). _
EntireRow.ClearContents
.AutoFilter
JPhelper.ClearContents
JPhelper = "=IF(ISNA(MATCH(B5,J46DATA,0)),FALSE,TRUE)"
.AutoFilter
.AutoFilter field:=25, Criteria1:="TRUE"
.Offset(1, 0).Resize(.CurrentRegion.Rows.Count - 4, 9).SpecialCells(xlCellTypeVisible).ClearContents
'set the first visible cell in column a to variable
Set OutRange = .Offset(1).Resize(.CurrentRegion.Rows.Count - 4, 1).SpecialCells(xlCellTypeVisible)
End With
I am looking for a code which can jump to a next cell from the activecell. I use the code
Activecell.offset[rowno][columnno]
This would take me to the next cell. However, this is a problem when the filter is on. I am not able to go to the next visible cell. Suppose if the row increase is 1, then cell selection goes to the hidden cell. I need to bypass the hidden cell and go to the next cell. Can anybody provide a code which does it? I tried searching the forum but could not get anything closer to this as I need something which works with offset and not cells.row.visible...etc.,
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?