I have a worksheet where I first filtered, then hid some columns. Used to be that I just highlighted the area I wanted copied, clicked the select visible cells button that I put on my toolbar, ctrl c and ctrl v into a new worksheet and only the visible cells would be copied. Now the button isn't working because when I ctrl v into the new worksheet, it shows the hidden columns also.
View 9 Replies
My goal is to get all numbers that are negative in my A column to be positive.
I filter column A to show only records with negative numbers (there are now hidden cells) (simple example, A2=-1 , A3=2, A4=-3, filter so I can now only see A2 and A4). I insert a column (B) and do "=abs(A1)" and drag that down. This works to get the absolute value of column A into column B, for only the visible records. (so I still only see rows 2 and 4; B2=1, B4=3)
Now the hard part. I want to copy these numbers to column A, but only paste to visible cells. I highlight my data range in column B and hit Alt + ; to only select visible cells. Now I hit Ctrl + c to copy. If I then click on the first cell in column A that I want to paste to and hit Ctrl + V, the data is pasted in all cells, no spaces, filling in the hidden cells, which I do not want (in my example the 1 from B2 goes to A2 and the 3 from B4 goes to A3).
If I select my entire 'paste to' data range in column A (A2:A4), hit ALT + ; to select visible only, and hit CTRL + V to paste, it tells me "This command cannot be used on multiple selections".
AOther postings of seen seem to intimate that my first attempt described here should work (select visible only, copy, then paste), but doesn't! i can copy visible only easily enough, but when I paste, it ALWAYS pastes into all rows, hidden or not.
I have the following code in my VBA
Selection.SpecialCells(xlCellTypeVisible).Select
This throws up error when the selection does not has any visible cells. Is there a way to check the selection for visible cells before executing this command.
I would like to select the visible cells, and then count down 50 rows in column A - is this possible?
I need some help using the spinner tool (the 2 way arrows) as a macro. I want it to point to different cells after each press. So, basically:
Click down once, go to cell A5
Click down again, now go to cell A6
Click down again, now go to cell A7
Clicking down again won't do anything, A7 is the end of the road
And the same thing backwards when clicking up.
I use the two commands SpinButton1_SpinDown() and SpinButton1_SpinUp(). I put the Range("A5").Select, etc. as the code. I don't know how to do the incremental part. I need a counter in there...
how to make this recorded macro work with more than the sheet it was recorded on. I need to work with the visible selections. But I'm having all kinds of problems trying to pick just the visible cells. Not having any luck with this project. I tried to included a test book but It keeps giving me an error.
View 4 Replies View RelatedI am trying to hide the excel 2010 application, open a csv file on a network drive, show the excel application.
The problem is a "Downloading" progress indicator appears, during the workbook open event I assume.
Code:
Sub Macro1 ()
Application.Visible = False
Application.DisplayAlerts = False
Workbooks.Open Filename:="S:LOGT5.CSV"
Application.Visible = True
Application.DisplayAlerts = True
I have seen the similar progress indicator during the "Save" event too. How to hide this?
I need to make my button CommandButton1 visible if I have a good value (0-200) in cell G30, and invisible if the resulting cell value is no good #N/A.
View 5 Replies View RelatedI want to open a workbook, using a button, but I don't want the workbook to be visible. I'm looking for something similar to the visible = false that you can use when opening a database file. If I use the visible = true command after the workbooks.open command, it hides the workbook that the the code is in and not the one that the code is opening.
Currently I'm just using the workbooks.open command, but I just want the file I'm opening to open in the background.
[Code] ......
What is wrong with above code? I am not able to select previous A15 cell, when macro is selected from C1 cell ( B row is filtered to hide ).
I'm having a problem moving the cell cursor 2 rows down once I find my LastRow (see LastRow code below). My problem is I need to move down 2 VISIBLE Rows down and I'm running into it moving 2 Rows down whether they are Visible or Hidden? If Row 50 is my LastRow, and I have it move 2 rows down, if Row 52 is Hidden, it still moves to Row 52 which can't be seen by the user after I do my stuff to that row? I can't unhide any hidden rows for other reasons. Is there a way to have the cursor move down 2 VISIBLE Rows instead of 2 Rows regardless?
The code I use to select the LastRow is:
LastRow = Cells(4000, 8).End(xlUp).Row
I move down 2 more rows using:
Cells(LastRow + 2, 8).Select 'Then I do some stuff here for the user, so it can't be a hidden row
I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).
There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.
This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.
Code i currently have is:
[Code] .......
I just need it to now go across 10 visible columns and set as a single print area.
I have a worksheet whereby many of the rows are hidden. These rows were initialy hidden by means of scipts ( I have numerous scripts to hide data under various criteria) eg: Scripts which hide rows based on cell count, cell color, cell data information etc...
Now that I am able to veiw only the information that i want to see.. is it possible to create a script which selects cells only from rows which are visible? I have created a Named range begining from E:12 to G:500 called "Select_EFG"
Uing the example below, how could I select the cell data from the visible rows (12, 30, 34, 35, 50 etc... up to row 500.) from this Named Range (columns E:12, G:500) .... and paste this information in Sheet 2 Row5 columnC
........A,B,C,D,E,F,G,
Row
12
30
34
35
50
57
59
100
140
400
490
500
I have a user form with multipage.
With the use of the option buttons,the page needs to made visible or invisible.
Example: on Page one, i have placed radio buttons as page2,Page3&page4.
By default only page 1 should be visible and when we select radio button page2, page2 should become visible or else it should be invisible,when we select radio button page3, page3 should become visible or else should remain invisible.
I have a workbook with about 53 worksheets one for every week in the year. They are named as follows:
VA-1-1-09 TO VA 12-28-09 All sheets are hidden except the (VA-1-1-09)
What I am trying to do is create some logic that would keep all 52 sheets Very hidden except sheet VA-1-1-09 Till the second week starts at that time what I would like to see happen sheet VA-1-5-09 come out of very hidden and appear visible and send sheet VA-1-1-09 to just a hidden state. I like to have this happen for every week of the year? If this can happen automatically that would be great however a command button clicked once a week would do the trick as well.
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
The code works up the If statement and I'm not sure why.
Code:
Private Sub SalesRedeemed_Click()
' Open SalesRedeemed Worksheet move to next month
Sheets("SalesRed").Select
Sheets("SalesRed").Range("B5").Select
If Range("B5") > 1 Then
Sheets("SalesRed").Range("B6").Select
End If
End Sub
I have a command button on my form that unloads it when i am finished. But i have to press it 20 times before it closes. The only line i have in the code is "UnLoad Me"
View 7 Replies View RelatedWhen you hit the enter button, it should jump to the cell below the one you currently have selected. Well, mine doesn't do that anymore? My tab works fine to go to the cell to the left, but enter just keeps the current cell selected. I know it isn't the Keyboard, b/c it works for every other app. What have I disabled/enabled to cause this? This happens with both the "return" enter button and the enter on the number pad. As of right now, either a mouse click or the down arrow is the only way for me to jump to the next cell.
View 3 Replies View RelatedI have made a list box and can see the data in it and make multiple choices. What I need to know how to do is put a small button and make the list box appear and make the selected choices, then hide the list box but the button visiable. I would to have check boxes and a scroll bar in the list box by the names but i am stumped. If you could show the code that will make this work that will be great!!! lets say cell B3 to B6 shows cat, dog, mouse, bird. I would check the box and choose cat and bird and have only these 2 show up in the cell B2 separated by a comma. So each line for about 100 lines down will need to have the same choices made but with equipment names, people ect. or is there something better that will work. I run Excel 2003 and windows xp.
View 9 Replies View RelatedI have a command button on worksheet2 of my spreadsheet, which has a macro assigned that will take the user to worksheet1 when it is clicked.
My problem is that when I hide worksheet1 using xlSheetVeryHidden - the maro seems to die and the command button no longer works.
I have a userform with two buttons : O.K. and Cancel
When I use the O.K. Button, all is correct, but when I use the Cancel Button, it doesn't work.
What line I have to add, to leave that userform ? (Cancel : CommandButton2_Click()
Sub CommandButton1_Click()
Me.Hide
End Sub
Public Function userChosen()
Me.Show
userChosen = Format(DateSerial(cmbJaar, cmbMaand, cmbDag), "dd.mm.yyyy")
Unload Me
End Function
I have written some code to search through excel sheets and return the values it finds. The code is written in a module, and when I run it by clicking the play button at the top of the VB editor it works perfectly.
However I have noticed that I need to link it to a button (on_Click) in sheet1, I have tried copying the code into the button sub, it throws up an error:
"Activate method of Range class failed"
Can anyone tell me why this code would work from its module and not when placed in the worksheet (the cells being activated are not empty).
I am currently running VBA when ComboBox1 is selected ComboBox2 shows specific information based on lists in the spreadsheet.
Now I would like it if ComboBox2 showed "Business Improvement" then ComboBox3 will show information set in that list.
Also, my submit button isn't working and I can't find out what's wrong using the debugger
I have a useform that loads up with two buttons and I waat to force the user to chose one of the buttons. However, I have noticed that the user can just press the cross in the top right corner of the form to close the window and therefore not press either button.
Is there anyway I can stop the close form button working?
I have had this problem in multiple different macros so I will just provide an example of relevant code:
Code:
For J = 0 To 3
Select Case J
Case J = 0
LikeVar = "a*spk1*E0"
LikeVar2 = "a*spk1*E7"
End Select
Next J
For some reason it skips over the likevar variable assignments even though J = 0 on the first time through the loop. I have tried changing the For line to J = 1 to 3, and the case to J = 1, but it still skips to the end select. Is it not possible to use a select case on an iterator variable?
I am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
I have this macro code in Sheet1 assigned to a button named Combination. I copied the whole sheet twice and moved to end. So they have the same data content and hopefully the macro in sheet1 will work as well in sheets2 and 3. But it's not. I just copied the code from VB codes Excel objects Sheet1 to Sheet2 and Sheet3. The cursor changed to a reading glass but it doesn't display any result. I am sure it's the worksheets(1).range part that needs to be edited but i am not sure if that is simply changing it to worksheets(2) or worksheets(3). I tried that also but no effect also.
Option Explicit
Public Sub ModelPricing_Template()
Dim a As Integer, b As Integer, c As Integer, d As Integer
Dim e As Integer, f As Integer, g As Integer
Worksheets(1).Range("a15:IV65536").ClearContents
[Code] ........
I have a 5000 line table I am filtering by a few columns, and I'd like to calculate an exponential trendline value.
=INDEX(LINEST(LN(R1059:R1167),W1059:W1167),1)
But I actually don't want all the values from R1059 to R1167 - I want to select only the displayed values (R1059, R1068, R1077, etc). Is there a way to select only display values to use in a formula? The problem is it would be a lot of manual work to select them all - there are 50 or so instances I would have to select 13 manual values.
I am using Excel 2007 on XP.
