I saw this macro posted by Fengore back in 2006, and it works beautifully. Now my question: Is there a way to continue using that string but have it start from a certain row? Columns(1).SpecialCells(xlCellTypeBlanks).EntireRow.Delete
View 2 RepliesI need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
I am creating a template to use at work. One one sheet, I am collecting data from another. Based on some conditions, it will print the value or leave the row blank. This works! But I can not get the empty rows to delete at the end.
View 3 Replies View Relatedhow to delete ALL the EMPTY/BLANK rows in an Excel sheet?
The sheet consisit of 18,000 rows.
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View RelatedI'm trying to use the code below to copy active sheet into a new workbook and clean some parts of it so it will be ready for next department's data input work. But when it comes to deleting empty rows in it, code gives Run-time error "1004" : Delete method of Range class failed error and it marks the part "Rows(r).Delete"
[Code] .....
I'm looking for a way to delete all named ranges starting with ProfitCenter. The macrorecorder doesn't give me any clues.
View 4 Replies View RelatedI'm scanning data into a spreadsheet using a barcode scanner, but I want the starting character and trailing characters to be removed after I hit enter.
For example...let's say I'm scanning the following text in cell A1:
=W05281212345600
When I hit enter (or the barcode scanner does auto-enter), I want cell A1 to read:
W052812123456
I will always want the "=" and the last two zeros removed from the 16 character number, leaving the 13-character number in its place.
I tried using Excel's various truncate functions (LEFT,RIGHT,MID, etc.), but that only places the corrected text in another cell. That would be fine if I could copy that truncated text back over the original text...but that created a loop problem.
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I found dynamic range name across columns:
=OFFSET($A$1,0,0, COUNTA($A:$A),COUNTA($1:$1))
which expands across Columns in Row 1.
What if we don’t know range to be named in which row or column starts?
What will be a formula (assume range starts on cell named “BegRng”)?
I need to unhide 2 rows at a time starting with rows 28 and 29 IF cell N28:O28 > 0. I need this to be for rows 30 and 31 IF cell N30:O30 > 0, rows 32 and 33 IF cell N32:O32 > 0, rows 34 and 35 IF cell N34:O34 > 0, rows 36 and 37 IF cell N36:O36 > 0, rows 38 and 39 IF cell N38:O38 > 0, rows 40 and 41 IF cell N40:O40 > 0.
There is currently a formula in each of the selected cells that is why I was going for greater than zero.
Is there a way to delete empty cells, without having to do each one individually. I have 10,000 numbers with about 500 empty cells. I did a search, but found nothing...
View 9 Replies View RelatedI have another report which needs to be sorted using a macro. However, before I can sort the data, I need to delete rows at the bottom of each report that have "0" values in column A and B. Again, each report I run is of different length so I need to write a code that will take that into consideration. Here is an example of what I need to do:
Sub second_step()
'
' second_step Macro
'
'
Range("C1").Select
Range(Selection, Selection.End(xlDown)).Select
Rows("7876:7876").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Range("A1").Select
End Sub
Now, the thing is, not every report will start having "0" values in row 7876. How do I write a code to reflect this?
I have searched around and cannot find exactly what im looking for. I have a table of data and want to delete it all by clicking a button. I only want it to delete the rows which have data in.
Example
A1 = Apple
A2 = Apple1
A3 = Apple2
A4 = Apple3
A5 = *Empty*
So it would delete A1-A4 and not delete A5.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedUsing an external UNIX program that quieries a database, I export all the data found based on my query and export the report as a text file. THe text file can be up to 1 MB of raw text.
Selecting all text and pasting the data into collum 1 using PASTE SPECIAL -->(TEXT)
All Data is in Collum A
Each record returned has between 40-50 values each on a seperate row, only 10 of which I need.
I am looking for a way to find the rows that begin with the unwanted field, and then delete the entire row.
Otherwise ignore the row.
IE:
AUDFI : (data path loc here)
BILLNUM : 060606
CUTNUM : (0000)
SD : 120012
ED : 121259
CC : 123456789 MATERIAL LISTS AND ITEMS
COMMENT : Multiple lines of text here
with continuing free form data, numbers, operators,
then the next data file would repeat:
ADUFI : (data path loc here)
...
...
...
etc.,
In the above example, I want to delete the rows AUDFI, & CUTNUM and move the below items up to take the empty rows place. The BILL NUM, SD,ED, and COMMENT are filed that are always kept (as well as others). Each record has roughly the same data, each tailored to an event or object.
The number of rows of data dumped into excel can easily exceed 50000, about 200 - 1500 records in the report.
After wards, the data is dumped to a text file for easier analysis.
In BASIC my line might look like
5 START
10 if A:$="AUDFI :" then delete row, move below contents up.
20 if A:$="CUTNUM :" then delete row, move below contents up.
30 END
(I think there needs to be a loop since the vaules AUDFI and CUTNUM (as well as other unwanted fields can occurr 200 - 1500 times each.)
I use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 Replies View RelatedI have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
I need to accomplish selecting a range using variables for the starting cell and ending cell rows and columns.
Pseudo code (how I'd like the syntax to be, but isn't):
Worksheets(mysheet).range(startCellRow, startCellCol : endCellRow,endCellCol).Select
With Selection
...
End With
Using excel 2007. I am interested in writing a VBA code to delete rows based on the text starting content. I would like to delete rows with cells that do NOT start with an "S" or "SA"
EX:
05S0128
06S0112
05S2298
S25852
S36963
SA36185
I would only like to keep the last 3 lines.
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedUsing the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details()
Dim rng As Range
Dim what As String
what = "DETAILS"
Do
Set rng = ActiveSheet.UsedRange.Find(what)
If rng Is Nothing Then
Exit Do
Else
Rows(rng.Row).Delete
End If
Loop
End Sub