I am creating a template to use at work. One one sheet, I am collecting data from another. Based on some conditions, it will print the value or leave the row blank. This works! But I can not get the empty rows to delete at the end.
View 3 RepliesI need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
how to delete ALL the EMPTY/BLANK rows in an Excel sheet?
The sheet consisit of 18,000 rows.
I saw this macro posted by Fengore back in 2006, and it works beautifully. Now my question: Is there a way to continue using that string but have it start from a certain row? Columns(1).SpecialCells(xlCellTypeBlanks).EntireRow.Delete
View 2 Replies View RelatedI'm trying to use the code below to copy active sheet into a new workbook and clean some parts of it so it will be ready for next department's data input work. But when it comes to deleting empty rows in it, code gives Run-time error "1004" : Delete method of Range class failed error and it marks the part "Rows(r).Delete"
[Code] .....
formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.
What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.
See annexed file for expected results.I have preference to have a formula much more.
I'm unsure how to adapt the code to suit my needs.
I have an Excel workbook that is created a few times a month from a template. When I update it I run a macro that saves a values only copy with the current date. I'd like to copy non-blank rows (from row 8 down) into the first empty row in a master workbook that is saved on a network drive. The path to the master workbook is "B:8MPBGTrade Pre-AdviceBG Trade Confirm Master.xls"
Is there a way to delete empty cells, without having to do each one individually. I have 10,000 numbers with about 500 empty cells. I did a search, but found nothing...
View 9 Replies View RelatedI have another report which needs to be sorted using a macro. However, before I can sort the data, I need to delete rows at the bottom of each report that have "0" values in column A and B. Again, each report I run is of different length so I need to write a code that will take that into consideration. Here is an example of what I need to do:
Sub second_step()
'
' second_step Macro
'
'
Range("C1").Select
Range(Selection, Selection.End(xlDown)).Select
Rows("7876:7876").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Range("A1").Select
End Sub
Now, the thing is, not every report will start having "0" values in row 7876. How do I write a code to reflect this?
I have searched around and cannot find exactly what im looking for. I have a table of data and want to delete it all by clicking a button. I only want it to delete the rows which have data in.
Example
A1 = Apple
A2 = Apple1
A3 = Apple2
A4 = Apple3
A5 = *Empty*
So it would delete A1-A4 and not delete A5.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx‎
Sheet1.doc‎
Sheet2.doc‎
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI've created the code below from scratch (ever so proud of myself even though it's basic lol)
Dim N As Long
Dim LR As Long
N = Range("A2").Value
LR = Application.WorksheetFunction.CountIf(Worksheets("Overview").Range("AJ:AJ"), N)
For N = 1 To LR
Here, 'N' is a project number. This code succesfuly counts the number of sub-tasks linked that that project in my data sheet. Now I want to bring all those rows into my template spreadsheet, but dont know how to start
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
how to create a copy of my employee attendance template. Is there a way to create a copy of the template by entering an employee name in the "name" cell of the template and it automatically renames the sheet that employee name and also saves or recopies the template for use with the next employee?
View 8 Replies View RelatedThe first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True
Next cell
Code:
For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete
Next cell
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I Have a number(30+) of excel files based off of one template. I have since updated the template, thus making the the old ones obsolete. Is there a way to update the older files to use the new template without having to copy and paste the addition's row by row column by column?
None of the additions to the template will change the placement of existing data, nor will it change the data itself. It will however add Values to cells that were previously empty.
Hints, Tricks, or Ideas?
I got a code to delete all rows in the sheet which contain the word "DETAILS" but I now want to delete all the rows that do not contain the word "DETAILS"
My code if needed is:
Sub Find_details()
Dim rng As Range
Dim what As String
what = "DETAILS"
Do
Set rng = ActiveSheet.UsedRange.Find(what)
If rng Is Nothing Then
Exit Do
Else
Rows(rng.Row).Delete
End If
Loop
End Sub
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies View Related1)
I created a one-sheet template, and a new workbook from that sheet. When in that new workbook I go Insert>Sheet>Other and select the aforementioned one-sheet template, Excel crashes, or if not, it adds the new sheet, but then no longer saves the workbook and starts producing error messages (like: "An unexpected error has ocurred. AutoRecover has been disabled for this session of Excel.").
1a)
Now, the complication is that this is working when I do a model operation with a generic template sheet. So I checked the template that I actually want to form sheets after, and Excel finds no errors, nor does it's name contain any unusual characters. What could Excel prevent from working with a template like this?
2)
How do I edit a template? The only way I can find is to manually find the spot in finder, open, and save with the same name. But: if I do that, the documents basing on that template don't change accordingly. If they're intended not to, the whole template procedure makes no sense. I could then just as well copy a file. — I've been searching for tutorials on that, but google doesn't even return a single result on Excel "edit template". Therefor my very basic question here.
Say I have a method that iterates through a bunch of Sheets. I check the name of every sheet, if it starts with "Data", I need to make everything between A4 and AZ500 empty (either by clearing cells or deleting rows doesn't matter how, as long as the result is an empty sheet below A4).
View 2 Replies View RelatedI have an excel spreadsheet that contains about 1000 rows and about 25 columns. The file contains employee information, name, id, cost center, department, title, FTE...etc. Column E contains the cost center which is a 7 digit number (i.e. 8001234). Within the 1000 rows of data there somewhere to 70 cost centers. I would like to delete all rows where a cost center does not match a list of 13 cost centers. I'm thinking I need some kind of array where I type in the 13 cost centers in the code, but I'm unsure of the syntax within VBA.
Also, the second step of the code I'm looking for is to delete all columns except for Column B, E, J and L. Those, by the way are Name, Cost Center, Job Title and FTE.
I want to delete all rows in the column of the ActiveCell when the ActiveCell.value < 0.01. Could you tell me why the code below doesn't work? It deletes the right rows but keeps looping without stopping
Sub DeleteZeros()
Dim Col As Long
Dim StopRow As Long
Col = ActiveCell.Column
StopRow = Cells(Rows.Count, Col).End(xlUp).Row
Range("A1").Select
[Code] .........
I have a macro that deletes rows. For some reason, the macro bombs out when the selection seems to be too big. Why is that?
deleterow_min = Sheets("Sheet1").Cells(1, 6)
deleterow_max = Sheets("Sheet1").Cells(1, 7)
Rows(deleterow_min & ":" & deleterow_max).Select
Selection.Delete Shift:=xlUp
In a part of my code I have something that will delete all hidden rows, like:
For Z = 1 To TotalRows - 1
If Cells(TotalRows - Z, 1).EntireRow.Hidden Then
Cells(TotalRows - Z, 1).EntireRow.Delete
End If
Next Z
I've done it in reverse to be quicker, but it's still quite slow. Granted, I am deleting several thousand rows, but surely there's a quicker way? Thinking about it logically I would presume that (in general) selecting stuff first in Excel and then deleting them appears to be quicker, but I'm not sure how to pull that off.