Macro PasteSpecial But Should Not See Moving?
Jun 6, 2014
Not sure how to say that, but I'm trying to write a simple macro to copy some data and pastespecial (Transpose) it somewhere else on the same sheet. But I don't want to see the data "moving".
Here is an example:
Code:
Sub Macro1()
Set SCOPE = ActiveSheet.Range("D2:G6")
Set THERE = ActiveSheet.Range("M240")
[Code]....
View 2 Replies
ADVERTISEMENT
Dec 19, 2009
I have a macro that works by pasting formulas into cells and then pasting over them with the values produced by the formulas. It works fine for 500 iterations then crashes at this line:
View 8 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Sep 1, 2007
I need to move a lot of data from what was originally a txt document into an easily readable form.
I have used Macro's before but only for very basic routines (so please treat me as a bit dumb when it comes to Macro’s).
I have Include Screen shot of the data highlighted in a colored box and the relevant colored cell I need to move it into.
This needs to be repeated many times with data that is consistent in its layout.
View 12 Replies
View Related
Jun 4, 2007
I have a spreadsheet that is finally working great. I made a custom tool bar with 5 buttons and each tied to a seperate macro. On my laptop ( where I developed it) it works great.
I put the whole sheet on on a thumb drive and moved it to another computer. When I load the sheet on the new computer , the tool bars are there but they error saying something about they can not find it.
I went into each button and changed it to put the macros in this workbook, saved it and when I put it on the other computer I had the same issue. I reloaded the original sheet and it went went back to all open workbooks.
I think what I did is saved them to all workbooks and they must be stored on the original computer. I thought just changing the button link would do it but I guess I am wrong.
My question is how do I get the 5 macros to follow the workbook? I need to move this to another computer in the morning.
View 9 Replies
View Related
Apr 23, 2007
What I need to do is have the macro move down a cell each time the data is pasted -
Sub saleschartnew()
ActiveWindow.ScrollRow = 3
ActiveWindow.ScrollRow = 2
ActiveWindow.ScrollRow = 1
Range("G3").Select
Selection.Copy
Sheets("Monthly Sales Chart").Select
Range("E10").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("Entry form").Select
Range("C13").Select
Application.CutCopyMode = False...............
I did search and found this: activesheet.cells(row,Col).offset(0,1).value = " Properties"
However, my knowledge of VBA is basically zero so I am not sure how this would be implemented into the macro.
View 3 Replies
View Related
Nov 25, 2008
I was wondering if there is some VBA code that I can put in my spreadsheet that would only allow Paste Special Values?
I want to make sure that the user can not simply cut and paste. If possible it would be nice if the user doesn't know what is going on all they need to know is that they can copy and paste.
Is there a seamless way to accomplish this?
View 9 Replies
View Related
Nov 29, 2006
I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
View 4 Replies
View Related
Mar 17, 2014
I have the code below to add my new sheet and give it todays date (coming from the menu sheet). However I can not figure out how to add the before code so it will save the new sheet at the beginning of all of the sheets every time.
[Code] .....
View 7 Replies
View Related
Jun 5, 2009
I have a massive data file with thousands of lines of data. Each line is a pair, for example
View 6 Replies
View Related
Jan 27, 2010
I'm trying to create a macro that will allow me to insert two rows to extend two separate tables. The problem is that one table needs to be directly below the other. So if the number of additional rows exceeds the margin between the two tables, the macro will just be inserting two rows into the top table.
I guess I'm looking for a way to get the macro to insert a row, not at a specific row number, but at the first row of the bottom table, which will change as rows are added to the top table.
View 3 Replies
View Related
Jul 9, 2012
I am looking to take the information from a selected cell in workbook a, and on closing the spreadsheet - moving that piece of data and adding it to the bottom of a list in column d of workbook b....
View 2 Replies
View Related
Jan 7, 2008
I have a list of diagnostic procedures, some of which are for the same patient. I need a macro that does the following: move every second procedure (a couple of cells per row) of one patient number (column B) next to (11 cells to the right and 1 row up) the first procedure. But only if there's less than 3 months between the procedures (dates are in column G) and if both procedures were on the same side of the body (left or right, column L)
Is there a macro that can do this for me?
Is there a macro that just moves a couple of cells in a row 11 cells to the right and 1 row up?
View 9 Replies
View Related
Jun 3, 2009
The following macro does what I need when run from the active workbook however I need macro to exist in 'personal.xls' so it can be easily applied to raw reports received in daily e-mails.
Sub Add_Sundays_Data()
Dim bk As Workbook
Dim bSave As Boolean
Dim lRow As Long
On Error Resume Next
Set bk = Workbooks("C:Template.xls")
On Error GoTo 0
If bk Is Nothing Then
bSave = True
Set bk = Workbooks.Open("C:Template.xls")
End If
View 9 Replies
View Related
May 18, 2006
I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))
When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.
View 2 Replies
View Related
Sep 4, 2007
I want to search a word in my Data sheet and want to know what is the column position. Example: I have a word "LastName" as a Column header in my Datasheet whose column position can be anywhere in the datasheet based on the table selected. So i want to write a generic code which give me COLUMN position for this word in the datasheet.
So if "LASTNAME" header is coming as 7th column it return me 7
if "LASTNAME" header is coming as 9th column it return me 9.
View 5 Replies
View Related
Jun 26, 2009
I have a working macro that duplicates the active worksheet with values only. It basically cleans out formulas and data validation from the data. The code is:
View 2 Replies
View Related
Sep 5, 2009
well heres my code ....
View 14 Replies
View Related
Sep 16, 2009
The following macros will:
I'm desperate for a copy paste macros that will:
1) Copy H3:H143 (141 rows) from "Sheet 1" and place this on "Sheet 2" on D4:D144 (141 rows)
2) Copy I:3:I143 (141 rows) from "Sheet 1" and place this on "Sheet 2" on I4:I144 (141 rows)
So, in essence, it will copy every single column across on "Sheet 1", but will paste every 5 columns on "Sheet 2" .
It will then loop 33 times to continually copy and paste across columns.
View 14 Replies
View Related
Aug 10, 2006
I've just written a new Excel application which works fine when run on my local PC, and also when I save a copy on a central network server, and run it over the network.
However when another user who's testing it, runs it from the same network server, or on his local PC, the code trips out at the following line of ....
View 9 Replies
View Related
Nov 7, 2011
What I am looking for is once I select the worksheet I want copied, I only want the cell values pasted in the new worksheet. In addition, the worksheet should have no cell formats of any kind. I highlighted a part of the code in red where I think the new code should go, but I am not sure.
Code:
Option Explicit
Option Compare Text
Sub CopySheet()
Dim sh As String, nm As String
sh = InputBox("Enter the name of the worksheet you want to copy.")
If sh = "" Then Exit Sub
[Code] .........
View 4 Replies
View Related
Jan 14, 2007
I am trying to copy a range from one sheet and paste in another sheet via VBA.
Sheets("RECAP CURRENT YEAR").Select
Range("E:E").Copy
Sheets("FORECAST").Activate
ActiveSheet.Paste Destination:=Range("IV1").End(xlToLeft).Offset(0, 1)
Range("A1").Select
Column E has formulas (=SumB3:D3) nothing more then that. I get a #REF after the paste into the FORCAST sheet.
I would like to Paste Values and Formats.
I tried changing the code to this, with different variations:
Sheets("RECAP CURRENT YEAR").Select
Range("E:E").Copy
Sheets("FORECAST").Activate
ActiveSheet.PasteSpecial Paste:=xlPasteFormats, xlPasteValues _
Destination:=Range("IV1").End(xlToLeft).Offset(0, 1)
Range("A1").Select
But keep comming up with errors.
View 9 Replies
View Related
Jul 28, 2008
Currently, my code involves making a connection to a db then run queries. Results from the queries goes to recordset & from the recordset copy to specified range in excel worksheet. I am trying to do an automation process.
The problem is that once the record is pasted in excel worksheet, the date column is not being recognised as date therefore excel function (vlookup) is not giving me the results in my report.
When i do a manual PasteSpecail as CSV into the worksheet from the query result, my report gets populated with data which is correct.
i've tried doing a pastespecial format:="CSV" but it doesnt work.
Is there any codes that i can use to copy from the recordset as a CSV format pastespecial??
Or any other ways that can be done?
View 9 Replies
View Related
Jan 27, 2014
I was given a spread sheet with a number of payments on it, I was asked to take the "four" potential payments and only show one total payment. There are 2900 lines in my file and as you can see from the example the scenario repeats it self with the "four" payments all the way to the bottom. I would like to be able to add H2 to H5, total that number in J2 and delete row 3,4 and 5. This then has to be continued all the way down to line 2878 where I could then run a macro I have to delete blank rows cleaning my spreadsheet up. I would take a looping or user controlled macro (ctrl +) so I don't have to do this manually.
Sample_total.xls
View 4 Replies
View Related
Jan 13, 2009
Could some one amend the VBA below to allow a continous loop on moving to the previous sheet within a workbook. Currently when I move to the first sheet if I use the shortcut key I get a debug error.
View 6 Replies
View Related
Mar 9, 2009
I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
View 2 Replies
View Related
Feb 14, 2012
I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
View 2 Replies
View Related
Mar 31, 2007
I have this macro listed below that finds all these files, copies cells from stat sheet and places them in sheet1 in another file. It keeps looping till all is found and done.
My problem is when it goes to paste in sheet 1 I want it to shift over a row each time.
Right now during the first pass it pastes in column B, I want it to start in column D
The issue seems to lie right under where it says "Put data into workbook"
Public Sub PullData()
Dim wkb As Workbook
Dim lngStore As Long
Dim strDate As String
Dim strName As String
Dim Book As String
Dim Sheet As String
Dim week As String
Dim Store As String
Dim IngRow As Long
Dim strCol(0 To 15) As String
strCol(0) = "b"
strCol(1) = "c"
strCol(2) = "d"
strCol(3) = "e"
strCol(4) = "f"
strCol(5) = "g"
strCol(6) = "h"
strCol(7) = "i"
strCol(8) = "j"
strCol(9) = "k"
strCol(10) = "l"
strCol(11) = "m"
strCol(12) = "n"
strCol(13) = "o"
strCol(14) = "p"
View 9 Replies
View Related
Jan 20, 2008
Is it possible to move rows of data in a spreadsheet to multiple spreadsheet accordingly?
I had lists of tasks in a single spreadsheet and i need to segregate the tasks for all my staff in serial while no duplication among all of them. For instance, i got 4 personals in my department and i need the 1st 4 tasks to be distribute to each of them and next 4 tasks accordingly. This is due to all tasks are equip with due date and i need to calculate how much time i need to accomplishing them. i'm used to manually move it and found it time consuming, so i was wondering if someone would instruct me where or how to achieve it by using a simple macro.
View 9 Replies
View Related
May 12, 2009
Sub Moveit2()
Dim Quantity As Range
Dim Cell As Range
Dim Cell2
Dim Breaks As Range
Set Quantity = Range("a2", "a21")
Set Breaks = Range("g1", "s1")
For Each Cell In Quantity
For Each Cell2 In Breaks
If Cell2 = Cell Then
Intersect(Cell2.EntireColumn, Cell.EntireRow) = Cell.Offset(0, 1)
End If
Next Cell2
Next Cell
End Sub
I have this macro to move things to the right. Sort of like a vlookup in a way. However, it runs using one range @ a time. For example it will look up the quantity in A2 versus what's in Row 1 and if they match, data from B2 would be moved into correct column. However, I'd like to run for multiple columns at the offset so I can don't have to keep changing data in the macro. Like want to run for these ranges at the same time as running the first range.
Set Quantity2 = Range("c2", "c21")..........
View 9 Replies
View Related