Sum Of Multiple Cells Within Multiple Sheets With Varying Criteria
May 5, 2013
I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.
I have been using the SUMIF formula as follows:
=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)
And so on for each sheet and then change the formula for the next skill set and then again for the next column.
Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.
So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.
So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.
View 5 Replies
ADVERTISEMENT
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Mar 20, 2014
I currently have a problem with suming the costs from tables across multiple sheets where the tables are of varying size.
Each sheet, 'sheet1' to 'sheet10' for simplicity sake, has a simple table consisting of two columns, 'Item' and 'Cost'. Each row contains a certain item and it's respective cost. The bottom of each table then has 'Total' in the item column and the sum of the total costs in the 'Cost' column.
However, each table on each sheet has a varying number of rows. This means on 'sheet1' the total may be in B5 and on 'sheet2' it might be in B7.
I need to sum all the total costs from 'sheet1' to 'sheet10' in a single cell.
I tried using the =SUMIFS formula with a 3D Range but I discovered that you can't use this formula with a 3D Range.
The only solution I could think of is to use a loop that goes through each sheet in turn, searches Column A for 'Total' and then adds the cell next to it to a running total.
View 3 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Jun 24, 2014
I've attached a sample sheet to this message.
What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.
For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.
Sample Data.xlsx
View 4 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Apr 28, 2012
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
View 5 Replies
View Related
Nov 21, 2012
I am using this formula but I don't know how to get it to populate more than one cell.
Here is the formula:
=INDEX(APPROVED!$A$3:$A$1000,MATCH($F$4&$H$1,APPROVED!$D$3:$D$1000&APPROVED!$C$3:$C$1000,0))
It has multiple matches but I can only see the first match in the cell.
View 1 Replies
View Related
Sep 25, 2013
I would like a macro that select all cells based on multiple criteria. It's a big sheet, but I've made it smaller in the following example.
In row 1, there are 2 headers, in B1 (electricity) and C1 (gas) In column A, there are 3 houses, in A2, A6 and A10. The blocks of cells in between (e.g. B2:B5) have 2 headers, 'period' in B2, and 'account number' in B4. B3 and B5 have a list of options in them.
I want to select cells that meet certain criteria. Either electricity or gas, and either period or account number. So, if in cell D1 I choose electricity and in D2 period, I would like to select B3, B7 and B11. If I choose gas and account number, I wish to select C5, C9 and C13.
View 1 Replies
View Related
Dec 29, 2006
My question is similar to the thread Count/ sum with two criteria from multiple sheets. For example, I would like to use SUM Formula the number of widgets sold by store (Column A) by month (Row 5) for each salesperson (sheets Homer, Marge, and Lisa). I'm using the following Count Or Sum Two Criteria From Multiple Sheets equation to achieve the desired results: =SUMPRODUCT(SUMIF(INDIRECT("'"&$A$1:$A$3&"'!A:A"),$A6,INDIRECT("'"&$A$1:$A$3&"'!b:b")))
where my worksheet names are in range A1:A3, the store names are in range A6:A10, and the months are in B5:D5. However, for each month, I have to manually change the column ie. from "'!b:b" to "'!c:c", "'!d:d", etc. In my real worksheet, the columns extend down to ED so to manually change the range would be extremely time consuming.
View 8 Replies
View Related
Mar 21, 2014
I'm trying to sum data based on a the criteria of a date being between a certain range and sorted by a particular name.
I have included a sample sheet with two tabs:
Totals-I would like to get the sum of the hours a person worked in the range of dates being 1/1/2014-1/24/2014 (which is D1 and E1 in the current charges sheet) Current Charges-this is the page that I would like to gather the information from.
Below is a sample of the formula I was trying to use, but I get an error....my interpretation of what I was trying to input is as follows: Sum C2:C34 in the current charge sheet if B2:B34 is greater than or equal to D1 on the current charges tab (which is 1/1/2014) and B2:B34 is less than or equal to E1 (which is 1/24/2014) with A4:A34 in the current charges sheet equal to A2 on Totals sheet.
SUMIFS('Current Charges'!C2:C34,'Current Charges'!$B$2:$B$34,">="&'Current Charges'!$D$1,Current Charges'!$B$2:$B$34,"<="&'Current Charges'!$E$1,'Current Charges'!$A$4:$A$34,A2)
Test Data:
SUMIFS Test Data.xlsx
View 14 Replies
View Related
Oct 30, 2013
I have thought about recording a vlookup but this might be messy and prone to errors. Is there anyway to search through multiple sheets for a value (code) in Col A sheet 1. And return X in sheet 1 in the next column.
View 2 Replies
View Related
Sep 5, 2007
I am trying to find a way to select and print multiple sheets based on a criteria or a list. I have a large worksheet with many sheets. Each sheet falls into one of three categories, and I want to be able to automatically print all tabs in each category. I have all of the sheets rolled up into a summary where I have access to all of the sheet name and print criteria.
View 4 Replies
View Related
Jun 16, 2014
I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.
So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).
The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14
View 6 Replies
View Related
Jun 30, 2009
I have a "SUMMARY" sheet and then five other sheets. I need to be able to extract the data which is >0% from each of the individual sheets and capture the results in the relevant section of the "SUMMARY" sheet.
For example, the data from sheet "PAYG" would need to be entered into cells F148:AJ155.
In each instance it is just the "model" detail I need to capture (column D)
View 5 Replies
View Related
Feb 19, 2012
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
View 5 Replies
View Related
Dec 4, 2006
name data1 data2 total
chris a b 100
a a 100
a a 100
steve b b 90
b a 90
b a 91
jane b a 89
a a 90
a a 92
its hard to line things up in here..... anyway... each name has two more lines of data associated with it. i want to take the 4th column last line for each and sort from greatest to smallest and rearrange all the data but keeping all three lines associated with each person together. one added complication. the number of ppl in this will vary although i can do a count of every three lines and tell exactly how many there will be. so for this purpose we can just keep it at three.
in this case, all three lines associated with jane should be moved up above the three lines of steve but stay below the three lines of chris. and the three lines for each person stay in the same order they are now
View 9 Replies
View Related
Feb 10, 2010
Is there a more efficient method of coding this?
View 3 Replies
View Related
Jan 17, 2010
i want to add the cells in column d, if column A=E1, if Column B=F1.
View 14 Replies
View Related
Jan 6, 2009
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
View 9 Replies
View Related
Apr 4, 2009
I have a spreadsheet that has two different data sources (i.e., A and B). The amounts of these data sources (i.e., the number of columns) varies from sheet to sheet. I have to calculate the averages of these data sources independently and together. Because this data is spread across twenty or more spreadsheets, these calculations can be time-consuming. I want to do the following:
1. Locate the last occurrence of the first data source "A" in row and then insert a column after that cell.
2. In that cell, I want to get the average of each data source for each row of data (i.e., there are always 19 rows of data).
I want to do the same two steps for the second data source "B". Then, I want to insert a column after the "B" average and this column will be used to get an average of each row of data from A and B together. Please keep in mind that the number of data sources for A and B varies from sheet to sheet.
So far, I am working on code to try to " find" the text in a range (i.e., find the last instance of "A"), but I cannot figure out how to get it to get it to stop at the last occurrence and then insert a column. I have some ideas about how to calculate the average, but any of yours are much appreciated.
Also, the row with the type of data (i.e., A or B) is named because this function is part of a larger macro. Therefore, it is relatively easy to get to it.
I have attached a version of the file that displays how I want it to look.
The code I have thus far is:
Cells.Find(What:=A, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 9 Replies
View Related
Jul 9, 2009
I have tried many options but can't seem to figure this out.
I have two tabs:
Trial balance and Analysis
On the Analysis sheet, I have a cell where I want it to look on the Trial balance sheet, find all codes these codes (7813.1, 7813.2, 7813.89) which are in column A:A, then give them the totals of what is in G:G.
View 12 Replies
View Related
Jan 23, 2010
Column A contains "Power","Instr","EHT", Column AJ contains "25M32", "25M35","25M39"and the a date is in column AE. I need to count how many time the date appears in AE if column the cell in A is "Power" and the cell in AJ is "25M32".
View 2 Replies
View Related
Sep 25, 2011
I am using a spreadsheet for a weekly football league. I would like "Sheet 1" to have the picks for the current week with the point total at the bottom for each team (I have that set up), but on a different "Sheet" I would like to keep a running total for each team. I know how to creat a formula for the total points, but how do I get that formula to attach to the corresponding column on the same row.
EX:
A B
"Team Name" "Formula for total points"
I would like A and B to stay connected when I auto arrange them in numerical order.
View 1 Replies
View Related
Sep 6, 2013
I have twelve sheets that each have a total score on cell G10 that I want to have copied to a thirteenth sheet in a specific column (F5-16). What would I have to do to make that happen? The G10 cell is an auto-summed cell, if that makes a difference.
Also, is there a specific way to create formulas?
View 3 Replies
View Related
May 6, 2014
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
View 5 Replies
View Related
