# Cells.Rows.End(xlUp).Count - Insted Of - UsedRange.Rows.Count

Mar 24, 2008
I used Sheets(1).Cells(1, 1).Rows.End(xlUp).Count instead of UsedRange.Rows.Count in this code , but it didn't succed with me. Why and how to do that

Dim i As Long, j As Long

j = 1

For i = 1 To UsedRange.Rows.Count

Sheets(2).Cells(j, "a").Value = Sheets(1).Cells(i, "a").Value

Sheets(2).Cells(j, "b").Value = Sheets(1).Cells(i, "b").Value

Sheets(2).Cells(j, "c").Value = Sheets(1).Cells(i, "c").Value

j = j + 1

Next i

End Sub

View 9 Replies
ADVERTISEMENT
Jul 21, 2014

I would like the TOTAL SOH column to reflect the totals for both warehouse and store count, but I cannot figure out the formula to get it. The way the sheets are loaded onto the system means thay cannot be the same so a simple sum across the rows cant be done. Is there a way of formula to do it ? If there were only a few rows I could do it manually , but the stock is in excess of a thousand lines.

View 7 Replies
View Related
Jul 21, 2008

I have a spreadsheet of over 15,000 lines of student information, sorted by student number. I want to count the number of rows which have a duplicate student number, up to 15 duplicates in a row, and show the total number of duplicates in a Separate Column. I.e.

Column 1 Column 2

Row 1 - 200101 3

Row 2 - 200101

Row 3 - 200101

Row 4 - 200102 2

Row 5 - 200102

Row 6 - 200103 1

I've been trying to use a Countif formula, but I found I had to use so many ANDs and ORs that the formula became too long. I don't know how to use programming code, only formulas in Excel. Is there an easier solution using some type of SUMPRODUCT code?

View 19 Replies
View Related
Mar 27, 2007

I have a sheet with colour coded cells and I need a macro that counts the number of rows with coloured cells.

I've tried the following code but I always get a count of 0 which isn't right.

Sub Count_Coloured_Cells()

Sheets("Issues").Select

Dim i, c

Dim LastRow As Long

i = 1

c = 0

LastRow = Range("A65536").End(xlUp).Row

Do While i < LastRow + 1

If Rows(1 + i & ":" & 1 + i).Interior.ColorIndex xlNone Then

c = c + 1

End If

i = i + 1

Loop

MsgBox (c)

End Sub

Remember, it's the number of rows I need to count (i.e. one row may have several colour coded cells but I only need to count it once).

View 9 Replies
View Related
Aug 25, 2014

create a function that counts only the number of rows in a range which contain less than 5 instances of the string "VAC". So if they have less than 5 cells in the row that contain "VAC" count + 1.

View 8 Replies
View Related
Jun 30, 2009

I have a 52 (one for each week) page workbook. I am trying to average cell J9 for the entire 52 pages. However the information is not added to the cell until the end of the week so week 30-52 all have 0s and should not be counted in the dividing number. Is there a way to have Excel count the number of cells that have a number (not 0) and divide the sum of the cells but that number.

=(WK1!J9+.....WK52!J9) / (counted number of cells not = 0)

View 14 Replies
View Related
Oct 14, 2008

I would like to select the visible cells, and then count down 50 rows in column A - is this possible?

View 9 Replies
View Related
Apr 18, 2013

I have data in B4:B55 and need a formula to return a count of rows, including rows that are blank. However, there are hidden rows that need to be omitted from the count.

View 1 Replies
View Related
Oct 9, 2009

I would like to count the no. of rows that has "Evolution" in column 8. Just a msg box to display would help.

View 8 Replies
View Related
Jul 15, 2008

I can count the blank cells withiin a range using

=COUNTBLANK(C6:AD2506)

But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.

It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.

View 14 Replies
View Related
Sep 22, 2009

Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.

I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference

View 5 Replies
View Related
Jul 13, 2008

I am using the following formula, I am trying to add a condition to only count the cell if it contains "host".

=SUMPRODUCT(ISNUMBER(C86:C117)*(MOD(ROW(C86:C117)-ROW(C86),2)=0))

View 10 Replies
View Related
Sep 23, 2009

I have used rows.count numerous times before, however, I'm getting an error now (runtime error 438, method not supported), this line is highlighted:

View 3 Replies
View Related
Nov 15, 2013

Count all the true statements in column A (Work) of sheet1 (Checklist), once counted insert that many rows on sheet2 in a specific location, I found a count formula just don't know how to do the insert rows part

Code:

Sub CountRows()

Dim Rng As Range, CountTrue As Long

Set Rng = Sheets("Checklist").Range("Work")

CountTrue = Application.WorksheetFunction.CountIf(Rng, "True")

End Sub

View 3 Replies
View Related
Apr 7, 2014

Col A Col B

163401 1

163401 1

163401 0

163402 1

163402 0

163402 0

GOAL -I want to be able to count Col B only once for the same set of records in COL A.

Based on Distinct criteria on COL A, I need to be able to count COL B. The count should be 1 for 163401 and not 2. Similarly for 163402 the count should be 1

View 11 Replies
View Related
Dec 17, 2013

I have a spreadsheet with rows and rows of data by date. The far left column houses the date and then each row is another occurrence for that date. Basically I need to count how many rows have the same date. Here is what the basic sheet looks like:

6/15/13

6/15/13

6/15/13

6/15/13

6/15/13

6/16/13

6/16/13

6/17/13

6/17/13

6/17/13

So the formula I am looking for would return, 6/15/13 =5, 6/16/13 = 2, 6/17/13 =3. Or something along those lines. I have a ton of data and using pivot table info to filter by each day will take FOREVER.

View 8 Replies
View Related
Nov 27, 2012

To find the best product for my customers I need to count the rows that I have highlighted by filling with a colour AND that contain an 'X' in the cell. Giving a total at the bottom of the row for each highlighted and 'X' cell. I cannot find any easy way of doing this and I am sure I will need to run a VBA script but cant quite get my head around how to do this. Perhaps there is an easier way to do this entirely.

View 6 Replies
View Related
Nov 16, 2008

I would like to have a macro which counts the rows. Description: The macro should check if there is any data in cell B7 and if there is then start the counting from one (insert 1 in cell A7). Then check if there is any data in cell B8 and if there is then insert 2 in cell A8..and so on..till there will be no more data in cell B.

View 2 Replies
View Related
Feb 9, 2010

I'm trying to get the 2 formulas described down below to work but I keep getting 'Run-time error: 1004 Application or object defined error'.

With the following formula I'm trying to have the COUNT function applied to;

Row 143:147

Row 153:157

Row 163:167

Row 173:177

View 4 Replies
View Related
Apr 24, 2006

It effectively counts the number of non-blank (>0) rows in an array. This

formula is limited, however, in that every column requires a separate

statement. I would like to find a function that could handle an array of any

size with a single statement.

100

110

000

001

3=SUM(IF((A1:A4>0)+(B1:B4>0)+(C1:C4),1,0))

1=OR(A1:C1>0) for

every row in the entire array. Unfortunately, according to this document AND

and OR functions cannot be nested within SUM+IF statements:

Dim oRow As Range

Dim cNonBlanks As Long

For Each oRow In Range("50:80").Rows

If Application.CountA(oRow) <> 0 Then

cNonBlanks = cNonBlanks + 1

End If

Next oRow

View 14 Replies
View Related
Dec 27, 2011

How come it still gives me "1" when the number of visible rows is 0 after autofilter?

Range("data").AutoFilter Field:=3, Criteria1:="=" & r.Value

j = Worksheets("Sheet1").Range("A2", Range("A" & Rows.Count).End

(xlUp)).Cells.SpecialCells(xlCellTypeVisible).Count

MsgBox (j)

View 9 Replies
View Related
Jan 6, 2013

I would like to get a simple function to count how many times the word fox is mentioned across rows , my answers are in col K .

If possible I would like to look for more than one word , sometimes two or three .

looking at row 1 , what would function be if counting fox , red , a

Sheet1 Â ABCDEFGHIJK1Theredfoxwasjumpingoverafox,okÂ 221fox,twofox.3fox.Â Â 337cowsÂ

0419thanimalwasareddogwithafoxfriend1

View 6 Replies
View Related
Feb 6, 2014

I am copying information from a data extraction application called Monarch and then pasting it into Excel. The data to be pasted has to be inserted in between some existing data in the worksheet. Is there a way to count the number of rows in the clipboard so I can insert this number of rows into my worksheet then paste the data from the clipboard?

View 2 Replies
View Related
Nov 19, 2006

I need a formula for counting rows. It should achieve the following;

It should count in increments of 1 (1,2,3,4, etc.) in each cell in a column (column AW, to be prescise).

It should skip hidden rows.

It should account for the fact that a formula is able to reveal rows and when this is

done, the counting formula should adjust to count the newly revealed row.

It should also be able to do the opposite - another formula/macro hides rows, and when this happens it should not count the newly hidden row.

I can imagine a formula in each cell of the column that says "Check the previous column and if it is visible, add 1. If a hidden row is encountered, do not add 1. When a non-hidden row is encountered again, continue adding 1."

View 9 Replies
View Related
Jan 16, 2009

I have a set of filtered data and am trying to copy data from the top visible row to the remaining rows. I can get Rows.count to do this when rows are not filtered but it doesnt work right in this scenario or at least I'm not setting it up right.

View 9 Replies
View Related
Apr 24, 2009

I have a column with some rows with data, some blank and some with symbol. These data are only numbers in the format as: 3110, 4789 / 22465. These numbers are just numbers representing project number. I would have numbers only the format shown above or else a blank cell. I need to count the rows that have numbers in them. If i use count, it counts and displays only the number of rows that are similar to 3110 format but totally excludes cells with 4789 / 22465 format. How do i make excel count rows that also includes cells with 4789 / 22465 format?

View 9 Replies
View Related
Aug 10, 2009

ÁreaAplicação Tp ModeloData Produção

SPCContas Internacionais PDM01-01-2009

OPEDOL PDM02-06-2009

OPE PCOL PDM01-04-2009

OPESINTRA PDM12-03-2009

SPCSGF PDM04-05-2009

SCMControlo Vendas PDM21-02-2009

SCMClientes Ocasionais PDM03-04-2009

SPCContas Internacionais LDM14-01-2009

i need to count the number of rows that have the Tp Mpdelo="PDM" and The Date is lower of "31-03-2009".

View 9 Replies
View Related
Mar 21, 2007

i count number of all rows with:

Dim countall As Long

countall = Sheet1. Range("a1", Sheet1.Range("A65535").End(xlUp)).Rows.count

this is the total of all rows, including hidden. how do i count the hidden rows which have been filtered?

preferably not a loop, isn't there a way to use "entirerow.hidden" and count that?

View 5 Replies
View Related
Aug 1, 2007

I am attempting to write a macro that will delete Rows.

Starting on Row 1

Keep Row 1

Delete the next 3 rows

Keep a row

Delete the next 3 rows

Im having trouble getting it to loop until completion.

View 3 Replies
View Related
Feb 13, 2014

Check the file for reference.

Basically, I want to conditional format(fill entire column with a color) if the numbers of non-empty cells for any given column are more than 2 for each team (labeled Alpha, Delta, Office, etc). So what I want to do is to count how many rows contain a letter (V or P) in a team (in column A) and if it exceeds 2, I can conditional format the entire column. I believe I know how to conditional format. I just need to get the counting function going.

Example.xlsx

View 2 Replies
View Related