I have an original workbook that I use daily stored in a folder called 'Live'. I also have this same workbook saved in a different folder call 'In Progress' because I am constantly improving and making changes to it. While I'm in the revision mode, I keep it in this folder. Once I've completed my revisions, I move it to the folder where the live workbook is located and replace the old version. Therefore, I have two copies of the workbook at all times. The name of the workbook in both folders is the same (IRQT)
I have a macro in this workbook that will allow you to save a copy of the workbook in a folder called IRQTArchive. The macro will create the folder if it doesn't exist, then store a copy of the workbook using a name in a cell. After that is complete it renames the workbook back to the original name (IRQT).
This macro works perfect in my live version, but when I execute the macro in the 'In Progress' version, I get a Compile error: Sub or Function not Defined when it reads the dirExists command in the first line of code. The code in both sheets is identical. Here are the first few lines of code. The command dirExists is highlited in yellow when it errors out.
I'm trying to find a way to save a single sheet of an excel workbook and in the same process delete all vba code and shapes from the new single sheet workbook. I was looking around and found this code which does save only the single sheet to a new one sheet workbook but doesn't delete the vba and shape that I have used to assign macros to in the original.
Code: Sub SaveSheetAsNewBook() Dim wb As Workbook Dim InitFileName As String Dim fileSaveName As String Dim wshape As Shape InitFileName = ThisWorkbook.Path & Format(Date, "mm.dd.yy")
I've created a userform below and I have a code to write the data entered in the form do the following:
1. Save the data in a worksheet (Asset History) within the same workbook,
2. Copy the newly entered data into a another worksheet (Asset Form).
3. Take an image of the data from worksheet (Asset Form) and
a) Create a HTML image on out look
b) Send out an email (Get the email distribution from worksheet (EmailList)
4. I also want to be able to select the data nad change if any of the information changes using the userform.
Not sure why my code is getting stuck and getting the attached error "1004" when I get to saving and emailing. My guess is that the error is on the Checklist option explicit but I cants fix.
Here is the full coding
Private Sub cmdsave_Click() Dim cell As Range Dim rowoffset As Integer
I'am trying to send a single worksheet by copying it out of workbook and saving it, and after sending I want to delete the temporary file. But I get a Error message: 'Run-time error 438: 'Object doesn't support this property or method
Sub SendWeekrapport() Dim wb As Workbook Dim addr As Variant Dim bestand As String Call SelectWeekrap addr = Array("myname@mycompany.com") Application. ScreenUpdating = False ActiveSheet.Copy Set wb = ActiveWorkbook With wb .SaveAs Range("AG3").Value & "bestand" & Range("b2").Value & ".xls" 'amend to suit .SendMail addr, " Attached Timesheet for " & Range("B2").Value .ChangeFileAccess xlReadOnly.............
wb.SendMail "person@address", _ "This is the Subject line"
and this seems to work fine. Could there be any potential problems with this? All senders and recipients should be using outlook. Also is there a way to send the workbook but lose any macros attached. I'm not sure that all recipients will be able to receive workbooks containing macros.
I have a spreadsheet that has approx 10 different sheets (tabs at the bottom). I want to write a routine that will take one of the sheets, copy it to a new workbook, and email the newly created workbook using Outlook.
I've entered this question once before and got some suggestions that seemed to work for a while. Then it became hit and miss as to whether it worked or not. Now I'm geting a "Can't create object" error everytime. I want to break this one sheet out and send only it because I don't want to send the entire workbook.
I have a workbook with several sheets- lets call it MyWorkbook (The VBA Project should be locked so no one can view code). What I need is to run a code from MyWorkbook to make a copy of this – call it NewWorkbook. Now in NewWorkbook I need to hide sheets Kong,Bong and Dong……then save it as ‘Workbook name’& Date & time. Then email NewWorkbook. (I don’t want to keep any copy of NewWorkbook)
After that I need to Save MyWorkbook (so basically MyWorkbook keeps getting updated with new info everyday, and there are no hidden sheets) VBA Codes should be password protected in both workbooks. I tried to write the email code , this is what I have so far.
I have a My.xlsx file that has data for single month and I want to make a single file in which I can have contents for whole year by copying this file 11 more times in the same excel work book. Finally I would have 12 sheet in a single workbook.
E.g. Jan-14, Feb-14, .... ,Dec-14
I don't need any calender data just 11 more copies of my original sheet in a single work book.
I need to save a single sheet to a file (in a workbook of many sheets). I can't use the copy command and then save the new workbook because it truncates the longer info in some cells.
I have 30 and above sheets in a work book and like that I am having 5 such books. The sheets are named as 201, 202, 203 ....etc as per the contents in that particular sheets. (201, 202 .....are the P.O nos.). all the work sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say 324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms part of the name of the sheet) that sheet should appear for me.
Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
I have 2 sheets which validates data using vlookup.
Sheet1
Table 1ABResult1121232313
=VLOOKUP(A7,B:B,1,FALSE) is the formula in result1 column. Sheet 2
Table 2DEResult21020102040203010#N/A
=VLOOKUP(F7,G:G,1,FALSE) is the formula in result2 column.
The basic idea of these vlookup is to check whether the data present in A or D column is present in B or E. If the data is there then it will be retrieved in "Result1" or "Result2" columns. If not then the result would return the value "#N/A".
What im trying to do is to copy the resultant data(from Result1, Result2) other than "#N/A" from individual sheets to a final consolidated sheet.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
This is probably a VBA thing, but there might be a simpler solution. Either would be grand!
Basically, I have a four sheet workbook that needs to be printed out in its entirety (no problem doing that ); however, I would like the final sheet (called "Room Data") to be printed, let's say ten times.
So basically I'd get a single print of the first three sheets and ten of the "Room Data".
Any ideas on how to do this without having to manually print the final sheet multiple times or creating ten identical sheets in the workbook?
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
I put together some code in a frankenstein fashion to have a report sent to different people based on the sheet name.
I am trying to automate this so that the macro looks at each sheet name and then converts the sheet to a PDF, attaching and sending an email to the relevant person.
However I have run into a referencing issue whereby it does not pick up the data from each sheet. I'm guessing this is to do with the way I have used ActiveSheet or sh but I have not figured it and really need a fresh pair of eyes on it.
It should be looking at each sheet in turn but instead it is taking the data from the activesheet and duplicating this based on the number of worksheets in the workbook.
I need to import the data from a specific sheet (same named sheet on all closed workbooks) to a sheet in an open workbook. All the columns are identical in every workbook but the number of rows is variable, so the data from each subsequent workbook must be appended to the end of the current data.
Whenever a button is pressed, this macro will clear the sheet, then import the data starting in A3. The workbooks are in different folders but they all have the same name, so some sort of explorer window will probably be needed to actually select each file.
Automating Excel from Access, I'm attempting to generate a single sheet workbook and save to a Sharepoint site. This process works fine on my machine (XL2007, XP), but on a coworkers computer (XL2003, XP), the code throws a 1004 error on the save as line. However, the really odd thing is that stepping through the code doesn't throw an error on the coworkers machine.
Here's the sub being ran; the line it errors out on is the first branch in the .saveas block.
Private Sub PublishXLtoMOSS() Dim objXL As Excel.Application 'Object Dim wb As Excel.workbook 'Object Dim ws As Excel.Worksheet 'Object Dim rs As DAO.Recordset Dim i As Long
I am using a macro to e-mail any work sheet with an address in A1. I would also like to attach a file that will be listed in cell E1 of that worksheet. The file is different for each work sheet that is being sent but will be listed in the same cell of each work sheet.
This is the code I am using (i got it from ron de bruin) when I use the .Attachments.Add (C:est1.txt) it works but i can not seem to figure out how to get it to read the file address in the E1 cell. The code i am trying to use is .Attachments.Add = ws.Range("E1").value.
Workbook_1 has a UDF that uses a Range() without any sheet name ( Range("myRange") instead of Sheets(1).Range("myRange") ). Workbook_2 has a macro that deletes a sheet. When the delete statement executes, the cells in Workbook_1 try to recalculate and the UDF returns an error. If I use 'workbooks("Workbook_1").Sheets(1).Range("myRange")' in the UDF then it works properly when WorkBook_2 deletes the sheet. ('Sheets(1).Range("myRange")' still produces an error).
I have a main workbook that uses a macro to open a workbook provided to me from another department. This workbook contains a sheet that is basically a copy of the sheet in the main document and has the same sheetname and same codename.
The macro should copy the sheet data from the site workbook to the sheet in the main workbook. However, when i tell the workbook to select the sheet in the site file using its codename it errors....
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
I am currently working with a hidden sheetname "hide_template" which contains formula linking to another sheetname "rawdata" of same workbook.
In this "rawdata", the contents is updated from time to time.
The problem is when I open this workbook and update the entries in "rawdata", the formulas/results in "hide_template" is not updated and invalid (ie. #N/A, #VALUE..)
This is the overview of process that Im working with:
===> open workbook ===> paste new entries on "rawdata" ==> run a macro to copy range in the "hidden_template" to paste to new sheet of same workbook
I already have a working macro to copy range from the "hidden_template" which works as follows:
===> set to visible the "hidden_template" ===> copy range from "hidden_template" ===> paste to new sheet ===> set to hidden the "hidden_template"
I have multiple workbooks ( with unique names) under same folder. Each workbook has "Report-Corn" sheet.
I would like to copy cell "P15" from each (workbook-> report-corn -> P15) and paste to Master.xls workbook -> Sheet 1 one after another which is also located under same folder.
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
Please find the attachment in which i have mentioned all the details about the error in VLOOKUP function. I couldn't understand why I am getting that error for that single Vlookup value while others are ok.
how to merge different workbook in a single excel workbook. E.g. letus one workbook name is ram and another is shyam i want to merge both and make another workbook in excel like ram or shyam or another s..
