I am looking to standardise data entry for a cell, so that it appears as such: 2011/031T/0003
Data may be entered as 11/031T/03 and is not always consistent.
I am hoping that a custom cell format will do the trick, to keep it simple however the combinations that I have tried have not worked.
This format needs to be Excel 2003 friendly.
I need to calculate the average spend on a day of the week over the month, so all Monday's or all Tuesday's, etc. One sheet is one week so I need to average b16 on 6 sheets as an example.
I used =AVERAGE('WEEK1:WEEK6'!B18) to calculate average over the six Monday's. The issue is, as in other posts, how do I ignore the cells that have a zero or null value.
I've tried adjusting this which was in 1 post
=AVERAGE(IF($C$2:$CA$2=C62,IF($C$25:$CA$25"",$C$25:$CA$25
with this
=AVERAGE(IF(1+1=2,IF('WEEK1:WEEK6 '!B180,'WEEK1:WEEK6 '!B18))) which returns #REF!
this from another post
=SUM('WEEK1:WEEK7 '!B18)/COUNTIF('WEEK1:WEEK7 '!B18,"0") which returns #VALUE!
and this
=AVERAGE(IF('WEEK1:WEEK7 '!B180,'WEEK1:WEEK7 '!B18)) which returns #NAME?
The cells on each sheet are sum formulas for other cells on the sheet not just numbers on their own.
Using windows 7, excel 2003
Excel 2003 / WinXP. I have a list object with 5 columns, A - E, and all cells have a border round them. I need a macro which will:
1. insert a row below the current row (whatever cell happens to be selected)
2. then remove the left hand border of the cell in column B in the new row,
3. then select the adjacent cell in column C in the new row ready for data entry.
Obviously I cannot specify any absolute addresses in the code, and this is where all my attempts to record a suitable macro fall down.
We have created a userform with several textbox for numbers. We'd like to show them with a format similar to "###,##0.00" and allow the users to enter numbers without commas, but always show the textbox formated. Is there any special way to manage this format? As the textbox is a "text" value, how can we manage the input and the numbers? Should we always replace the "," withi a nullstring? Example:
Private Sub tbCakPrice_Exit(ByVal Cancel As MSForms.ReturnBoolean)
tbCakPrice.Text = Format(Val(tbCakPrice.Value), "######0.00")
tbPxCakCnFCgl.Value = Format(Val(tbCakPrice.Value) + Val(tbFleteRealCgl.Value), "########0.00")
End Sub.......................
I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.
I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.
I'm working with three large data sets covering a month of data in 5 minute intervals. There is a single date and time column which I am using some custom formats to list Time in 12 hour format, AM or PM and Day of the week.
Based upon the various analysis scenarios, adding some Autofilter columns is meeting most of my needs. One issue I am having is that I can filter on a single day using the built in list that Autofilter provides. But I have been asked to look at weekend vs weekday.
Since Excel 2003 only offers two filter criteria, I thought I could use a custom filter with Saturday and Sunday as include or exclude criteria. But, what I am findings is that while the Autofilter shows each day in the dropdown, certain attempts to use them within the custom autofilter do not work.
For example, equals Saturday and equals Sunday correctly returns only weekend data. However, if I try changing both to Does not equals, the result is that no data is filtered.Some of my research indicates that the problem is that the date information being presented as days of the week would need to be text strings . This seems to shed some light on the issue as any attempts at using wildcards fail.
I have several sources of information for client files. the number format includes a reference number and a month, eg 123/11, 456/02. In some cases, the numbers may be presented including the company initials, eg ABC/00123/11. I want to make sure all numbers on all sources are the same as I am using Vlookup and this reference no to copy information from one source to another. Sometimes when I change the format Excel sees this as a date, eg 11/11 is 11-Nov, and in some cases Excel sees a fraction, eg 123/11 is 123 11ths or 123 divided by 11.
I can easily take out the reference no with a find and replace FIND ABC/ replace with . But this often results in a number with leading zeroes, eg ABC/0123/06 will leave 0123/06.
I am using Excel 2003.
I have been struggling to get dates to remain in a consistent format within my Excel 2003 worksheets. I would like to work out how to keep them permanently in the "dd/mm/yyy" format. I have tried several formatting options. The current method I will explain below:
I have several forms into which the 'date' is automatically entered using the - Format(Date, "dd/mm/yyyy") code. This is then saved into cells on a worksheet using the code
ws.Cells(iRow, 1).NumberFormat = "dd/mm/yyyy"
ws.Cells(iRow, 1).Value = CDate(Me.Date1.Caption)
At this point if I do a search for a date, lets say 23/03/2012 I can retrieve it and everything related to it - all seems fine (also all dates are visually in the correct format in my cells etc).
The problem arises when I exit Excel and save the workbook. When I go back into the workbook at a later time and try and search for the same date it won't work. Although the dates in the cells still read for example 23/03/2012, the search requires me to now use the format 03/23/2012 to retrieve the information (It seems like in the background the date has reverted to the US date format upon saving and yet visually it is still how I've set it up).
Is there a way to scan a document into excel 2003 and be able to keep the current format ? or some way to be able to get it into excel and the easliy put it back to the format I need?
View 2 Replies View RelatedIs there a way to disable the Convert button on the File menu and also to limit the Save As file types? I have a workbook that I maintain in Office 2003 that gets filled out by customers and returned. When a user with a newer version of Excel converts the file, it doesn't function properly when I go open it. I believe the conversion issue has to do with Active X Controls, but I'm using them to do some things that won't work with Forms Controls, so replacing them would be a last resort. Also, upgrading Office isn't an option at this point.
View 1 Replies View RelatedI have a VBA subroutine that builds a list of dates in an array and then copies this to the worksheet using worksheetfunction.transpose. The array is two dimensional and therefore uses the variant data type.
This works fine in Excel 2002. In Excel 2003 the array is fine until the Transpose function is used, at this point they are changed from dd/mm/yyyy to mm/dd/yyyy. This means that some dates are changed (eg: 01/Mar/2008 becomes 03/Jan/2008) and some are written as strings (eg: 17/Mar/2008 becomes the string "17/03/2008" and cannot be operated on as a date).
I'm aware that there was a hotfix to deal with a similar issue regarding recalculation but this is on Excel 2003 SP3 which should already have that hotfix in place.
I have reduced my code down to a basic demonstration showing the problem. This assumes the worksheet contains some dates in "A2:A32". I have also attached the workbook containing this code.
VB:
Private Sub CommandButton1_Click()
Dim a() As Variant, c As Integer
Redim a(1 To 31)
For c = 1 To 31
a(c) = Cells(1 + c, 1)
Next c
Range("D2:D32") = WorksheetFunction.Transpose(a)
End Sub
I have fixed this problem by looping through each element of the array and writing them individually in to cells but this is far slower so I'd like to know if there is a better solution than that.
Excel 2007.I have a list of postcodes (UK) which have different lengths of characters (including spaces) from 6-8, however our system seems to add additional spaces inbetween the postcode, so it could have upto 11/12 characters (inc spaces) Below is what could come out:
EH21 6PQ - 1 Space (8 Char)
EH12 9HG - 3 Spaces (10 Char)
E1 8DF - 3 Spaces (8 Char)
LL5 1GH - 2 Spaces (8 Char)
L5 1FG - 1 Space (6 Char)
What I need is a formula to ensure each postcode only has 8 characters by inserting spaces between if there's less than 8 char and trimming if there's more than 8 char
So from the above postcodes the desired results would be:
EH21 6PQ - 1 Space (8 Char) - This would be correct
EH12 9HG - 3 Spaces (10 Char) - Trim off 2 spaces from the middle
E1 8DF - 3 Spaces (8 Char) - This would be correct
LL5 1GH - 2 Spaces (8 Char) - This would be correct
L5 1FG - 1 Space (6 Char) - Insert 2 spaces in the middle
I enter in numbers, eg: 1, 2, 10, 24, 100, 1000 in a consecqutive cell range
They display as: 0.01, 0.02, 0.1, 0.24, 1, 10. Default cell format is general. If I change cell format to Number (with default display of 2 decimal points) it displays: 0.01, 0.02, 0.10, 0.24, 1.00, 10.00. If I also specify no decimal points, it displays: 0,0,0,0,1,10
The only way I can get the numbers I enter to display (and store) as 1,2,10,24, 100, 1000 is to change cell format to text and THEN retype th numbers into the cells. But, then it creates the green error comment in top left of each cell.
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedUsing Excel 2003, is it possible to use 2 sumif functions in one cell?
i.e., sumif and sumif
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
i'm using excel 2003 and i'm trying to mark 7 cells in a row by conditional design by one of the cell
example : if the date on january? mark all line in yellow, for february mark in red and ect
A B C
528602545 assafsarit@walla.com 01/01/2013
527271005 eti_sh6@walla.com 01/01/2013
[Code] ...........
We have a query, that looks at an external data source (db2 i believe). It will pull all data under a certain product set, and as an additional Criteria we currently have Serial Number.
Now, if the value entered is the serial number, lets say '1234567' for example, it will happily pull all instances of that into the table.
However, what I would like is a cell where I can enter the serial number, and the query will look at the Criteria, the Value will reference a cell (where we can type any serial number), and it will then populate it! I thought that would be fairly intuitive even for a complete novice like myself - now I am likely to have nightmares about Function Errors!
What I have tried:
*Setting the value to a cell ref... ie instead of '1234567' i have set the value to =$a$1 and in that cell i have a serial number.
*Tried to create a parameter. So value of [Serial Number] I then get a prompt saying "Enter parameter Value (serial number) - Regardless of if i type a cell reference (ie =$a$1, or i input the actual serial that worked before when it was '1234567' I still get a function error!
I keep trying different permutations of things, but I am ill prepared.
I have to file an insurance claim due to a fire in my home. I have a folder with .jpg photos located at C:InsClaimOnlinePhotos . Im working with Excel 2003. I am trying to put the picture of the damaged protery in Column A on the same row as the detail about that damaged property using the ActiveSheet.Pictures.Insert function. The name of the picture is located in Column B. There are multiple sheets in the Excel book and each contains from 10 to over 700 rows. I would like to run the macro based on the active sheet to add the pictures one sheet at a time. I would like the pictures to be about 1.2" High by 1.6" Wide and be actually be within the cell of Column A of the row where the detail information is located. I have played with writing my own code, pieces of others code and full code sets I found in the Forum. Nothing works. Below is the best I found so far but, it uses Column C for the placement of the pictues.
When I try to run the below code I get Run-Time Error "1004" "Unable to get the insert Property of the Picture class".
I'm not sure if this code should work in Excel 2003 or not.
MS Word allows a person to turn off email addresses so that you have to press the Ctrl key then left click the mouse. This makes sure that every time a person touches a cell that it does not automatically load that address into Outlook. Is the same possible in Excel 2003?
View 3 Replies View RelatedUsing Excel 2003.
I have a hyperlink from cell M2 in a worksheet to cell B2 in another worksheet. I typed the cell reference on the target worksheet as B2. this works fine. The problem is that when I copy/paste the hyperlink down the column, the reference cell stays at B2. I need the reference cell to change when copied down to B3, B4, etc.
Trying to isolate the second number in cell.
If I have 48X144X68 in J10, I need 144.
I tried:
=MID(J10,FIND("X",J10,2)+1,3) which works, but when a cell has 65X50X68, then I get 50X where I only want 50.
The numbers can vary in size (i.e., 1 to 5 digits) but always separated by an X or some letter.
Excel 2003
Data in cell A1 - 1) A Q
Data in cell A2 - 12) V
Data in cell A3 - 131) B H L
How do I throw away the #) and the following space in cells A1, A2, and A3 and save the rest?
Excel 2003. ie. no VBA.
I am using Excel 2003
Cell B13 contains the row number of the first row of data on the sheet and B14 contains the row number of the end row of data. This is because the number of rows vary over time.
I'm trying to do a COUNTIF to test for duplicates in column R (contains integers) and I want to specify the range to count by referring to the value in B13 and B14 in the formula and so I have the following which returns FALSE for some reason even if the value in R19 appears more than once in the range ...
=COUNTIF(INDEX(R:R,$B$13):INDEX(R:R,$B$14),R19)>1
I have done a Scenario and they list the cell address (example R2C35) in the Report - the cell has the text "R2C35" in it.
I want to get the contents of a cell 2 columns to the left of Cell R2C35.
So what would I use for the Reference Cell in the Offset formula?
I'm having the following problem:
A1 & B1 = variable inputs from a calculator
Value C1 is calculated as follows: IF(A1<=0,"",(B1*G1))................(where G1 is a fixed value with 6 digits)
MY PROBLEM: The result in C1 should always be a ROUNDUP value.
I just don't know how to combine ROUNDUP with IF(A1<=0,"",(B1*G1))
I keep record of my blood sugar in excel 2003 that I send to my doctor weekly.
What I would like to do is, instead of typing the readings and mmol/L at the end in every cell, is to just type in the reading (example 5.5) then tab of the cell and have excel populate the cell with mmol/L automatically after the reading.
Can it be done?
In VBA (Excel 2003), I'm wanting to get a reference to an ActiveX comboBox that is inside/attached to a cell.
I can iterate thru all the OLEObjects in the OLEObjects collection of the Worksheet and test the .TopLeftCell property to see if it matches my target cell. However, this seems like a long way around the problem - particularly if there's hundreds of comboboxes in the sheet.
Intuitively, I would have thought there would be a Cell.OLEObjects collection, but it appears that there isn't.
Is there a quicker and easier way to get a reference to the OLEObjects within a target cell?
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.