I keep record of my blood sugar in excel 2003 that I send to my doctor weekly.
What I would like to do is, instead of typing the readings and mmol/L at the end in every cell, is to just type in the reading (example 5.5) then tab of the cell and have excel populate the cell with mmol/L automatically after the reading.
Can it be done?
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
I'm trying to make a macro in Excel 2003 to create x amount of named worksheets that are a copy of a different worksheet.
1. I have a main worksheet that will have a number manually entered into a cell (lets say A1);
2. I have a 'template' worksheet;
3. I'll assign the macro to a button on the main worksheet
If I enter '10' into cell A1 of the main worksheet, I'd like to click the button and have Excel create 10 copies of the template worksheet. These new worksheets should all share the same name with a number after them (ex: banana 1, banana 2..... banana 10).
Is there a way to show the results of a survey (basic y/n) as a percentage of total surveys submitted?
I have also been charged with keeping the customer data (name/house number) visible when it's displayed as a chart?
Attached is a sample : sample.xls
Excel 2003 btw...
I have a worksheet with five columns (A, B, C, D and E)
The cells in Column B contain letters and/or numbers (without spaces) in no particular order.
The cells in Column C contain letters and/or numbers (without spaces) in no particular order.
I want to compare all characters in 1st Cell of Column B with all characters in 1st Cell of Column C, and display the matching characters in 1st Cell of Column D, and the character count of 1st Cell in Column D must be displayed in 1st Cell of Column E. note that multiple instances of the same character must not be treated as duplicates. When execution on 1st Row is finished then repeat procedure for Row 2, etc... Stop execution when first empty cell in Column B is located.
Example:
B1 = LJLM12
C1 = KY2MLK
B2 = ZCG4GM
C2 = X4GGGC
B3 = KTCBNG
C3 = GNBTBB
The script/code/formula must output the following:
D1 = LM2
E1 = 3
D2 = CG4G
E2 = 4
D3 = TBNG
E3 = 4
I am using Excel 2003. Y
I have a VBA subroutine that builds a list of dates in an array and then copies this to the worksheet using worksheetfunction.transpose. The array is two dimensional and therefore uses the variant data type.
This works fine in Excel 2002. In Excel 2003 the array is fine until the Transpose function is used, at this point they are changed from dd/mm/yyyy to mm/dd/yyyy. This means that some dates are changed (eg: 01/Mar/2008 becomes 03/Jan/2008) and some are written as strings (eg: 17/Mar/2008 becomes the string "17/03/2008" and cannot be operated on as a date).
I'm aware that there was a hotfix to deal with a similar issue regarding recalculation but this is on Excel 2003 SP3 which should already have that hotfix in place.
I have reduced my code down to a basic demonstration showing the problem. This assumes the worksheet contains some dates in "A2:A32". I have also attached the workbook containing this code.
VB:
Private Sub CommandButton1_Click()
Dim a() As Variant, c As Integer
Redim a(1 To 31)
For c = 1 To 31
a(c) = Cells(1 + c, 1)
Next c
Range("D2:D32") = WorksheetFunction.Transpose(a)
End Sub
I have fixed this problem by looping through each element of the array and writing them individually in to cells but this is far slower so I'd like to know if there is a better solution than that.
I have this code working fine in excel 2007 but I need to get it working in excel 2003.
=0.02*(_xlfn.SUMIFS($D$2:$D$98,$C$2:$C$98,">="&I5,$C$2:$C$98,"<="&I4))
I have attached a test document to show what I'd like to do. It is basically adding values if the column next to it is in a certain range.
counting columns in Excel 2003.xls
I am using Excel 2003
I have used =IF(I6=J6,1,0) but I want a 0 value if the two cells are blank. How do add this to the formula?
I have a 97-2003 spreadsheet with approximately 22,000 lines of seperate companies. I need to know how to insert a blank line between the company names. I have been using the "Right Click - Insert" method but soon realized there must be 2000 different companies. The Company Name column is A.
View 7 Replies View RelatedBasically the first worksheet (equipment list) is set out for parts used for each individual unit which can be printed out for each unit.
The second worksheet is an equipment list, where each part number and quantity required is displayed which can be sent to suppliers for ordering.
At the moment I
-> copy the equipment list to a new worksheet
-> do an advanced filter for "Unique records only"
-> =SUMIF('Equipment List'!B:B,'Parts List'!A16,'Equipment List'!D:D)
which is much faster than the way we used to do it.
The problem is, when I add a part to the equipment list that is new, I need to go through the process again.
Is there a way to automate so any parts I add to the equipment list, if it is the first time the part number has been entered, it will copy to the parts list worksheet and update the qty column or if it is an existing part number it just updates the qty column?
The equipment list may potentially have up to 100 different drives, but using mainly the same equipment.
I created this sample on an old desktop using excel 2003 but I use 2010 on my laptop.
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
Assume I filled some cells of a worksheet (in Excel 2007).
Now I place the cursor in one of the cells and dragged the cursor to the right side. As a result more and more empty columns are automatically added at the right side even I do not enter something. Similarly rows are added at the bottom when cursor is dragged downwards.
Correspondingly the horizontal (and vertical) slider shrinks because the dimensions of the matrix grows.
Is there a menu/function which let me do the opposite?
Something like a trim/shrink function which cuts/deletes all empty columns beginning from the right side resp. rows from the bottom?
.... but not from the left and topmost side.
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies View RelatedUsing Excel 2003, is it possible to use 2 sumif functions in one cell?
i.e., sumif and sumif
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
i'm using excel 2003 and i'm trying to mark 7 cells in a row by conditional design by one of the cell
example : if the date on january? mark all line in yellow, for february mark in red and ect
A B C
528602545 assafsarit@walla.com 01/01/2013
527271005 eti_sh6@walla.com 01/01/2013
[Code] ...........
We have a query, that looks at an external data source (db2 i believe). It will pull all data under a certain product set, and as an additional Criteria we currently have Serial Number.
Now, if the value entered is the serial number, lets say '1234567' for example, it will happily pull all instances of that into the table.
However, what I would like is a cell where I can enter the serial number, and the query will look at the Criteria, the Value will reference a cell (where we can type any serial number), and it will then populate it! I thought that would be fairly intuitive even for a complete novice like myself - now I am likely to have nightmares about Function Errors!
What I have tried:
*Setting the value to a cell ref... ie instead of '1234567' i have set the value to =$a$1 and in that cell i have a serial number.
*Tried to create a parameter. So value of [Serial Number] I then get a prompt saying "Enter parameter Value (serial number) - Regardless of if i type a cell reference (ie =$a$1, or i input the actual serial that worked before when it was '1234567' I still get a function error!
I keep trying different permutations of things, but I am ill prepared.
I have to file an insurance claim due to a fire in my home. I have a folder with .jpg photos located at C:InsClaimOnlinePhotos . Im working with Excel 2003. I am trying to put the picture of the damaged protery in Column A on the same row as the detail about that damaged property using the ActiveSheet.Pictures.Insert function. The name of the picture is located in Column B. There are multiple sheets in the Excel book and each contains from 10 to over 700 rows. I would like to run the macro based on the active sheet to add the pictures one sheet at a time. I would like the pictures to be about 1.2" High by 1.6" Wide and be actually be within the cell of Column A of the row where the detail information is located. I have played with writing my own code, pieces of others code and full code sets I found in the Forum. Nothing works. Below is the best I found so far but, it uses Column C for the placement of the pictues.
When I try to run the below code I get Run-Time Error "1004" "Unable to get the insert Property of the Picture class".
I'm not sure if this code should work in Excel 2003 or not.
MS Word allows a person to turn off email addresses so that you have to press the Ctrl key then left click the mouse. This makes sure that every time a person touches a cell that it does not automatically load that address into Outlook. Is the same possible in Excel 2003?
View 3 Replies View RelatedUsing Excel 2003.
I have a hyperlink from cell M2 in a worksheet to cell B2 in another worksheet. I typed the cell reference on the target worksheet as B2. this works fine. The problem is that when I copy/paste the hyperlink down the column, the reference cell stays at B2. I need the reference cell to change when copied down to B3, B4, etc.
Trying to isolate the second number in cell.
If I have 48X144X68 in J10, I need 144.
I tried:
=MID(J10,FIND("X",J10,2)+1,3) which works, but when a cell has 65X50X68, then I get 50X where I only want 50.
The numbers can vary in size (i.e., 1 to 5 digits) but always separated by an X or some letter.
Excel 2003
Data in cell A1 - 1) A Q
Data in cell A2 - 12) V
Data in cell A3 - 131) B H L
How do I throw away the #) and the following space in cells A1, A2, and A3 and save the rest?
Excel 2003. ie. no VBA.
Add together D3+G3+J3+M3+Q3+U3 and put the result into W3? I think the reason it wont work is because there will not always be a value in D3/G3 and J3/M3
New KS4 grades Markbook.xlsx
I am using Excel 2003
Cell B13 contains the row number of the first row of data on the sheet and B14 contains the row number of the end row of data. This is because the number of rows vary over time.
I'm trying to do a COUNTIF to test for duplicates in column R (contains integers) and I want to specify the range to count by referring to the value in B13 and B14 in the formula and so I have the following which returns FALSE for some reason even if the value in R19 appears more than once in the range ...
=COUNTIF(INDEX(R:R,$B$13):INDEX(R:R,$B$14),R19)>1
I have done a Scenario and they list the cell address (example R2C35) in the Report - the cell has the text "R2C35" in it.
I want to get the contents of a cell 2 columns to the left of Cell R2C35.
So what would I use for the Reference Cell in the Offset formula?
I'm having the following problem:
A1 & B1 = variable inputs from a calculator
Value C1 is calculated as follows: IF(A1<=0,"",(B1*G1))................(where G1 is a fixed value with 6 digits)
MY PROBLEM: The result in C1 should always be a ROUNDUP value.
I just don't know how to combine ROUNDUP with IF(A1<=0,"",(B1*G1))
In VBA (Excel 2003), I'm wanting to get a reference to an ActiveX comboBox that is inside/attached to a cell.
I can iterate thru all the OLEObjects in the OLEObjects collection of the Worksheet and test the .TopLeftCell property to see if it matches my target cell. However, this seems like a long way around the problem - particularly if there's hundreds of comboboxes in the sheet.
Intuitively, I would have thought there would be a Cell.OLEObjects collection, but it appears that there isn't.
Is there a quicker and easier way to get a reference to the OLEObjects within a target cell?
I have two work sheets where I have data.
Sheet1 contain daily input table which as follows:
Name salaryBonusXX10002XY9001YY11002ZY15003ZZ12502AA10502AZ9501
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
SALARY DATABASEMonth Name Salary Bonus
Problem:
I want that when I finished writing on the sheet 1(which i do manually) then with macro it go the sheet 2 and find first empty cell in the name column and past the all the data of sheet1 table. Months I will put manually. I am working on MS2003.
Does 2003 restrict how may characters that you can put in a wrapped cell? Is there anyway to expand?
View 3 Replies View RelatedI am looking to standardise data entry for a cell, so that it appears as such: 2011/031T/0003
Data may be entered as 11/031T/03 and is not always consistent.
I am hoping that a custom cell format will do the trick, to keep it simple however the combinations that I have tried have not worked.
This format needs to be Excel 2003 friendly.
