I am using excel 2003 and I am looking for a formula that will highlight duplicate cells and change the cell to red.
Unlike newer versions that have duplicate cells within the formatting tool, appears that 03 doesnt.
Also I am looking for a formula that will highlight blue a date cell when the date arrives.
I would like (in excel 10) to highlight cells where there is NO DUPLICATE found In Columns "E" on Worksheets 1 & 2. Is that possible ?
View 7 Replies View RelatedI am looking for a formula for a date.
I want the cell and column to highlight when the date has arrived, and I want it to remain highlighted for 7 days.
I have got as far as =F1=TODAY()
I have a very basic understanding of excel, I mean BASIC, for my work I have multiple dates for vehicles to go in for inspections. I would like the cells to change colours when within 30 days, 10 days and 5 days. I'm on a work excel 2003.
View 6 Replies View RelatedI have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.
I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
Excel 2003
On one of our computers at work, Excel is acting especially strange. The conditional formatting in Excel on one of our computers is not working. In addition, we cannot fill a cell with any color or change the color of the writing. We can click a color for the letters and type it in, but immediately after another cell is highlighted, the writing goes black again. When we try to highlight multiple cells with the cursor, the cells are black instead of the normal color. This happens to not just spreadsheets that are new, but existing spreadsheets on our shared drive from only this one computer as well. No other computers are affected this way. All other computers show the spreadsheets fine and do not have any functionality issues.
I would like to have Excel 2003 be able to highlight the row if there is data in certain columns. Specifically if there is a number greater than zero.
For example the following could work:
[CODE][=OR(LEN(H9),LEN(I9),LEN(K9),LEN(Q9),LEN(R9),LEN(S9),LEN(W9),LEN(X9),LEN(Y9),LEN(AB9),LEN(AD9))/CODE]
However, there are times when I need to add a column/criteria. Thus I would have to go into conditional format and redo all the rows in the worksheet. Is there a smarter way to do this?
I was hoping to provide a list of cell address from the header or better than that look for specific numbers in the header row and if there is a number greater than zero, then highlight the entire row.
There is no specific pattern as to which columns would trigger the requirement.
Also how do you keep the ranges from moving when copying across and down. Sometimes I run into that issue. Maybe highlight the entire row and then enter the conditional format?
I have 3 columns containing id, item, colour. I want to check for duplicate id's in the id column and where duplicates are found merge the colours into one cell, as follows:
iditemcolour
1245bookred
1245bookorange
1245bookblue
1456chairred
1367chairgreen
1876tablewhite
1876tablebrown
would become
iditemcolour
1245bookred,orange,blue
1456chairred
1367chairgreen
1876tablewhite,brown
Any way of Deleting duplicate records, using Excel 2003.
The raw data is in the form of a text string. For example:
Vehicle 123456_F_AB 280
Vehicle 123456_R_AB 147
So when I do a count of these cells, I obtain a count of 2. '=Count(A1)'. How can I easily exclude 1 of the duplicates (123456). It needs to be a user friendly solution as other people may have to run this when I'm on leave?
Unfortunately we don't have 2010 at work so I don't have the luxury of the use of the duplicate function.
I'm using Excel 2003 and need to remove duplicate names from a list; what would be the best formula to do this.
I've done a countif to identify how many occurrences appear; any other formula if greater than to get to the object of how many staff I have in the list
how to even start this macro but i will like the macro to find duplicate with thin the same row and highlight it i have done with conditional formatting but the spreadsheet is about 3000 rows excel performance is super slow if anybody has a macro out there.
View 9 Replies View RelatedI have a spreadsheet with columns A to W populated with data and 2470 rows
Column A has email addresses in it (2470 rows)
Column B has email addresses that are bad and are duplicated of those found in Column A there are only 345 of them in column B.
I would like to compare columns A and B and highlight the email addresses in column A that are also found in column B.
OR: If column A has a duplicate found in column B I would like the word delete to be inserted into column C of that row so I can review and then delete later.
As per my attached file : duplicate value.xlsx
How to highlight duplicate value by using Conditional Formatting in office 2010.
Actually i Know how to use this feature in sheet "example" of my attachment.
But i want to highlight inv# 457878268 in cell E9 of sheet "My requirement" if it is exist above in cell E2 to E6.
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
I would like to know how I can have a macro run on an excel sheet of mine.
I have a little database with a few names and email addresses submitted to me via web.
But some people tried to register to my services TWICE with a different name, but same email address (not smart eh)
I would like to run a macro on a column and have it search for duplicate values and highlight them in... blue perhaps.?
P.s. the column format is set to 'TEXT'
I am using Excel 2003
Cell B13 contains the row number of the first row of data on the sheet and B14 contains the row number of the end row of data. This is because the number of rows vary over time.
I'm trying to do a COUNTIF to test for duplicates in column R (contains integers) and I want to specify the range to count by referring to the value in B13 and B14 in the formula and so I have the following which returns FALSE for some reason even if the value in R19 appears more than once in the range ...
=COUNTIF(INDEX(R:R,$B$13):INDEX(R:R,$B$14),R19)>1
I'm having the following problem:
A1 & B1 = variable inputs from a calculator
Value C1 is calculated as follows: IF(A1<=0,"",(B1*G1))................(where G1 is a fixed value with 6 digits)
MY PROBLEM: The result in C1 should always be a ROUNDUP value.
I just don't know how to combine ROUNDUP with IF(A1<=0,"",(B1*G1))
I am using Excel 2003. Looking for a way to find out whether some data I want to delete in a sheet is used by a formula somewhere else within the file. Is there a way to check that? In other words, I have the number 500 in A1, and I want to delete it, but I don't know whether it will impact a calculation on another sheet that involves that value in A1.
View 4 Replies View RelatedIs it possible to get Excel to highlight a cell when the IF formula returns a TRUE value? (Using MS Office 2003)
View 2 Replies View RelatedI am wondering if it possible to automate the copying of data from particular cells, based on a value in a different cell, into a different format.
So to go from this simplified table:
AB1NameLevel2Arthur2a3Briony3c4Catherine3b5David3a6Edward2a7Felicity3c8George3c
to something like this:
FGHI12a3c3b3a2ArthurBrionyCatherineDavid3EdwardFelicity
4
George
At the moment I do it all manually, and it takes forever. I am sure there must be a simple way of doing it. I am using Excel 2003, but could work in a newer version if required.
how to write a formula that will leave a cell blank if nothing is entered. I do not want it to show a 0 unless the cell entered is a 0.
In cell G16 - I am adding U46 and U58 together.
I do not have a problem when it is 1 cell - my formula works fine. When I have 2 cells added together, the formula does not work.
How can i highlight cell "TE001 in 6/19/14" to red color if it duplicate value within the same day, but will not highlight cell "TE001 in 6/20/14" if not in the same day...
Date
Code
6/19/14
TE001
6/19/14
TE001
6/20/14
TE001
I have unprotected cells in excel where I need to change the content (number) and cell color, but I don't want the cell borders to change. I'm a beginner with vba. I've tried protect sheet and workbook options, but looks like I need a vba code and don't know where to start.
Win 7
Office 2007
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
i have a macro that opens 10 other workbooks and copies cells onto a "master" workbook. Until recently, everything worked fine. Suddendly, while it opens the 9 books and copies as it is expected, but when it opens the 10th wb, the macro breaks at a very simple copy/paste.
The weirdest thing is that after it breaks, I cannot select any cells neither in the opened wb nor in the master wb. This continues even after I press the "reset" button in the vba. So, I am only able to select objects (text boxes etc) in my wb and not any cells.
Also, the "arrow" icon on the design toolbar is not active. And I've tried pressing and de-pressing the F8 key, but I still cannot select any cells.
I have option explicit in the beginning of my macro. And i'm using excel 2003.
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
Excel 2003
If user changes cell A1 then give msg box "do not edit this cell" and then change it back to "Quarter". I tried using lock and protect sheet but it limits the other cells. So a msg box and resetting the cell will work better.
I enter 13 digit number in a cell, when I save my Worksheet in CSV format the number is changed.
Example:
I enter 9328627000014 (this is a barcode) After saving this file the number is displayed in the Formula Bar as 9328630000000 and in the Cell it show up as 9.33E+12 When I go to Format Cells, this cell is selected as Scientific. When I change it to Number, after saving it again it returns back to scientific with the old display. Also when I enter 2 digit number in another cell in another column and I choose to be displayed as number with 2 decimal places, after saving the file it returns back as General format. When I am saving this file as CSV a window pops up with a warning that my file may contain features that are not compatible with CSV. I can not choose text format in the cell because it is a datafeed and it has to be read correctly as number.
I use Microsoft Office 2003.
I have a question regarding the properties of an Excel file (.xls 2003). I can change them all (as indicated on Microsoft support website) expect the name of the last person who recorded the document (File ==> Properties==>Stat.)
How to change the name?
