I have an excel 2007 file which contain a lot of macros. File size is 100MB. This file is not developed by myself, it's post in the webpage and let the members of the page to download on daily basis.. I've been downloading and using this file for over a year with no problem until this week.
Problem: During opening the file. There is a message box popped up, saying "Excel found unreadable content in filename.xlsm'. do you want to recover the contents of this workbook ? If you trust the source of this workbook, click Yes." When I click "yes", excel is trying to repair the file. Once it's done, I could see only the contents, however, all the macros are gone. When I copied this very same file and open in other notebooks, everything is working fine...
Assumption: Couple days ago, I was writing/testing macros in other workbooks and also opened this particular file. I might did something stupid which cause this problem...
During the same time, I used to have the same problem with another file. I solved it by copy and open with another PC then copy macros and paste it to the file on my notebook.
I am using office excel 2007 with all the latest updates installed on a windows vista machine. 3 months ago i made an xlsx file containing contact information. Few days ago, it was consist of 4 sheets. 1st sheet had about 18000 rows and 1 column while the other 3 sheets have about 100 rows and 1 column each. The last 2 days i get an error when i try to open the file i get the error Excel found unreadable content in "name.xlsx" Do you want to recover the contents of this workbook? If you truth the source of this workbook, click Yes. If i click on Yes i get another error this file cannot be open by using microsoft excel and ask me to search online. If i click no, 4 times, as many as the sheets i get the file open. with the following message
Excel completed file level validation and repair. Some parts of this workbook may have been repaired or discarded. Replaced Part: /xl/worksheets/sheet1.xml part with XML error. The name in the end tag of the element must match the element type in the start tag. Line 2, column 1249206.
and the 1st sheet with the most records is empty while the other 3 sheets are ok. I tried the built in repait method no go. I unistalled and reinstall office without installing the updates, nothing. I also tried some recover programes where only the recovery toolbox for excel worked but i am searching for a solution that i will not have to pay more money beside the office product to recover the damaged office excel.
I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below
Code: Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1) On Error GoTo TabErrorHandler oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &
[Code].....
After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."
When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"
If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.
Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.
I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.
Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues) For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1 If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _ Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _ Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete Next iRSLHMHSD
I am using excel excel 2007 in windows 7. I have a search button that works great, however, I want it to also highlight the cell green, when it finds what I am searching for. Here is the code below for the search button I have.
Private Sub CommandButton6_Click() Dim searchthis As String, Found As Range Me.Unprotect Password:="123" searchthis = InputBox("Type Number.", "Property Search") searchthis = searchthis & "*" Set Found = Range("A:A,e:e").Find(What:=searchthis, LookIn:=xlFormulas, LookAt:=xlWhole) If Not Found Is Nothing Then Found.Select Me.Protect Password:="123" End Sub
I have a file which included monetary amounts in many currencies, which appear in Excel 2007 as:
232.44 EUR 103,796.10 CZK 18,071.08 PHP
I need to use the value and currency code, but unfortunately the currency code is part of the cell format (so I can't use, say =right(3) to grab it.
The cell format is set to: #,##0.00 "EUR" , with each cell set according to the currency within.
Of course I will be going back to the source to see what I can do to get something more useful directly, but is there any way I can grab the currency code so I can use it ?
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
Using excel 2007. I am interested in writing a VBA code to delete rows based on the text starting content. I would like to delete rows with cells that do NOT start with an "S" or "SA"
I have a macro-enabled template file in Excel 2007. I would like the user to be unable to save in any format other than macro-enabled. They should be free to choose a path and filename, but not the file type.
I presume this means some VBA code in the before save event, but I don't know what.
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
I'm on excel 2010 and I have a small group excel files I open everyday. Most of the files are static in name and location. I've got a macro created to open those files, which works fine with workbooks.open and the file path.
There are two report files I want to incorporate into my macro of workbooks to open. The files are created weekly and the files names have the following format: "Report Name (YYYY-MM-DD).xlsm". I don't want to use the file's last modified date because older files may get edited after the more recent ones are created. The files are also not always created on the same day, so the solution needs to be flexible enough to not refer to a specific day of the week or anything.
Macro open an excel file based on the latest date found in filename.
I have a worksheet that contains two basic columns of data, A and B. What I would like to do is based on the value in column A, I would like to copy the contents of column B to a textfile (preserving the basic line structure and hopefully without any extra characters like quotation marks attached). So for all the values in column A = 'Account', Id like to take all the corresponding values in Column E (for example) and save them to the same file, preferably where the filename itself as 'Account.xyz'. And I would like to do this for all unique values in Column A, that is do it for 'Account' and 'AccountPrivilege' etc. Note Column A is essentially presorted alphabetically already. There are actually 1000s of rows with hundreds of unique A values so Id like to find a way to automate this process.
I have several sheets I use for MI and most have similar amounts of data in, ie, a tab for each month with out 15-20 columns and upto 10,000 rows, then a couple of summary sheets with filtering and calculations in.
One of my sheets is currently 16Mb, when the others are about a third of that, with similar amounts of data.
Is there a way to find what is causing the extra space to be taken in this sheet?
Or does this seem about right for the amount of data?
I am not able to add a new Excel sheet in a existing file when I right click next to the existing page it gives this option only and I am using Arabic Charcters + I am not having too many sheets
I received a USB drive from a client with an Excel spreadsheet with hyperlinks to PDF's (not sure of the version it was originally created in but my version is 2007). The PDF's are in another folder on the USB drive.
The cells with the hyperlinks have a formula to hidden cells [i.e. =HYPERLINK(C17,B17)] - in column B is the name of the hyperlink and in column C looks to be the file trial to the PDF (please see attached picture).
When I select the link, I get an Alert Box stating, "Cannot open the specified file." How I can get these links to work?
I have files that have thousands of rows in them with company names. The rows contain the company name plus lots of other info. I'd like to be able to create files or sheets with the company name as the file or sheet name with the respective rows contained within it. Make sense?
For example:
Original file or sheet Date Company Info1 Info2 Jul Sams Expense Desk Jan Freds Expense Doughnuts Jun Sams Deposit Return Feb Sams Expense Food Dec Freds Expense TV
Would become:
Sheet or File Sams Date Company Info1 Info2 Jul Sams Expense Desk Jun Sams Deposit Return Feb Sams Expense Food
Sheet or File Freds Date Company Info1 Info2 Jan Freds Expense Doughnuts Dec Freds Expense TV
I have a spreadsheet listed out with 2-3 pieces of data per row like:
Mark - abc John - def John - ghi Abby - xyz
etc.
What I need to do is create a new file for each unique string in column A. So for my brief example above, the "Mark" file would have 1 row, the "John" file would have 2 rows, etc. I also need to save the new file by the name in the first column (so "mark.xls"). (Conveniently, the table is sorted by the first column already.)
What I did was create a new worksheet for each row and then save that as my file. However I'm having problems getting my file to contain more than one row (I can get either the first or last row, but not all of them). I have about 30 spreadsheets to do this for, and each will create 80+ files... I'd really rather not do them by hand.
I'm on Excel 2007 if that matters.
I cobbled together some code I found in various places and this is what I have so far:
Code:
Sub CreateWorkbooks() Dim newSheet As Worksheet, regionSheet As Worksheet, CurSheet As Worksheet Dim cell As Object Dim regionRange As String Dim lngRows As Long Dim CurRow As Long
[Code]...
(note that the comments are what it is supposed to be doing, not necessarily what it is doing)
I have an Excel worksheet (2007 version) which I am trying to save as a PDF file. However, the PDF option is not listed in my "Save as type" drop down window.
I have an excel add-in which is a ribbon which houses a great deal of financial tools that I use on a regular basis so I don't have to hunt around excel for things I use regularly. The add-in has always loaded automatically whenever I opened excel - whether I opened excel by creating a new blank document or by double clicking a previously existing file.
Starting a few days ago though, the add-in only opens when opening excel by creating a new blank file. I can't think of anything that changed recently. Using Excel 2007.
Even when opening a file by double clicking, Excel still says the add-in is active (in excel options).
I would like to create a PDF file from a RANGE Name, excel 2007, attach it to MS Outlook 2007, Once in Outlook I will select the recipient, add some remarks and hit send. I can do this now with a workbook but not a range.
One of my excel files has refused to open and i think it is corrupted. The error message is; Excel cannot open because the file format or extension is not valid .Verify that the file has not been corrupted and that the file extension matches the format of the file.
How do i repair and recover all the data in the excel file.
I have an XLS file that gets data from an imported XML file. I need to apply some filters and then export it in a new XML file. I'm trying both "Development->Export" and "Save as->XML Data" procedures, but it always saves all data in the XLS document, not only the filtered. How can I obtain a new XML file with only filtered data???
Every time I start up excel whether it's opening a new spreadsheet or an existing one it tries to open one that I had deleted a while ago. I have nothing in my xlstartup files and I have thoroughly searched all files around it, before it, after it, and all in between. I went to Excel Options>Advanced>General and there is nothing in the field where it says "At startup open all files in:"
It seems to be trying to open the file from my desktop.
