Excel 2007 :: Freezing Top Two Rows As Headings

Jan 19, 2014

Trying to freeze top 2 rows as headings.

I select top two rows then

Under VIEW / FREEZE FRAMES I select Freeze ... according to current selection.

But what freezes are rows 1-15 and colums A-N, which I never selected.

How do I get Excel to freeze just the top 2 rows?

View 2 Replies


ADVERTISEMENT

Excel 2007 :: Make Column Headings Appear On Large Spreadsheet?

Sep 7, 2012

How do I make the column headings appear when I'm working on a large spread sheet so I don't have to scroll to the top each time to see where I am. This is on Excel 2007.

View 5 Replies View Related

Delete Rows In Excel Between Two Row Headings?

Jun 19, 2014

I have an excel file with multiple sites and I need to delete empty rows base on two repeated words in column A. Empty Rows need to be deleted between the cells in column A called Litter and Community. There are other empty rows that need to stay in so only rows between "litter" followed by "community".

View 3 Replies View Related

Conditional Freezing Of Multiple Rows

Aug 11, 2009

I have a worksheet (Data Lookup) that initially I just required row 1 to be frozen. Now my worksheet would be much easier to read if I was able to freeze row 115 and row 263 when they reached the top of the sheet respectively.

e.g. Row 1 frozen, when I scroll down the sheet and row 115 hits row 1 that would also be frozen and the same with row 263 when it comes into contact with row 115.

I have looked around and cant find a solution and to be honest I'm not sure if it is even possible.

View 7 Replies View Related

Freezing Several Columns And Rows Simultaneously

Mar 1, 2012

freezing columns and rows it does not seem possible to freeze MULTIPLE rows AND MULTIPLE columns simultaneously in the same spreadsheet.

In my spreadsheet I would like to freeze columns A, B, C as well as rows 1 - 8.

View 5 Replies View Related

Freezing Separate Rows When Using Filter

Aug 6, 2008

I'm using a fairly large spreadsheet to put all the cost and benefits of a large area development phased over different years and then calculate the NPV of the total project. The costs/benefits are on separate sheets and are divided into categories with headers. Every category has a summation row as last row.

Because the project is divided into subprojects I created a column which has a dropdown box (using the Validate function) in which I can attribute that cost/benefit to a certain subproject. Using IF functions and another dropdownbox on my Overview page I can get a insight in the total cost and benefits of the subproject I select in the dropdown box.

So far so good of course, but what I really want is not only to be able to get the Overview page per subproject, but also the Cost and Benefits pages. I was thinking about putting a filter on the column which has the dropdown boxes with the subproject number in them, but when I select a number I want all the headers and "summation rows" of all the categories to freeze/stay in sight, because otherwise the output of the filter is useless (for printing and evaluating) ...

View 9 Replies View Related

Excel Freezing When Entering Data In Some Columns?

Mar 12, 2013

resolving a "not responding" problem that occurs when I try to enter data into a cell in one of two columns in my spreadsheet. These columns don't seem to be linked and I can't see a way of getting at where the problem might be coming from.

Is there a tried and tested method for trouble shooting something like this?

View 2 Replies View Related

Excel 2007 :: VBA - Add New Rows If A Condition Is Met

Feb 16, 2014

how can I write a routine to add rows in one Sheet if a condition which involves a different Sheet is met (excel 2007).

In Sheet 1 is a list of ("liquid") names (cells C4:C26) which will need to be expanded should the IF condition be satisfied. In row 27 I have a subtotal (whihc is using data from columns D onwards), and from row 29 down cells are not empty.

The condition I want to verify is in Sheet 4-column I, where it is reported whether a name is classified as "liquid" or "illiquid". If the number of "liquid" names in sheet4-column I is more than the number of names in Sheet1-C4:C26 I would like to add as many rows as the difference between the two lists. Also I would like to make sure that the subtotals that I have in row 27 (and that will be shifted down when new rows are added) will also inlcude the data in the new rows (the subtotal is taking data from columns D onwards).

Should the code need to inlcude the name of the tabs, Sheet 1 is called Summary and Sheet 4 CDS Data.

View 1 Replies View Related

Excel 2007 :: Delete Red Rows Only

Aug 13, 2013

I have a large file with a bunch of color coding and need to delete my red rows only.

View 3 Replies View Related

Excel 2007 :: Combine Multiple Rows Into One

Jan 10, 2012

I have a list of about 4,000 contacts each with about 2 or 3 products with us. Each product creates a new contact row.

I would like to merge each row with the same contact into one row.

I have attached an example : Example test.xlsx‎

View 14 Replies View Related

Excel 2007 :: After Deleting Rows - Next Row Does Not Move Up

Aug 13, 2011

I have a macro that exports a row (or rows) to destination sheet ("Amber") based on criteria in Column K. Once exported I return to the source sheet ("Register") and the row that had the data that I wanted exported has exported the info but the row just sits where it was and appears to only 'clear the contents'. The macro I use is:

Sub Extract_FW_Rows()
Set ws = ActiveSheet
endrow = ws.Cells(65000, 1).End(xlUp).Row
For i = endrow To 1 Step -1

[Code] ......

I set up the macro on Excel 2002 in work as thats what we have....however when I input the same code into my home laptop working Excel 2007, all works perfectly i.e. it cuts the data to destination sheet, goes back to source sheet and the rows have moved up accordingly - I do realise that the action taken is a row removal i.e. I had 1000 rows, macro executes, I now have 999 rows in the source sheet.

What I would like is the same result in 2002 as I get in 2007.

View 6 Replies View Related

Excel 2007 :: Copy Rows To New File

Jan 24, 2012

I have files that have thousands of rows in them with company names. The rows contain the company name plus lots of other info. I'd like to be able to create files or sheets with the company name as the file or sheet name with the respective rows contained within it. Make sense?

For example:

Original file or sheet
Date Company Info1 Info2
Jul Sams Expense Desk
Jan Freds Expense Doughnuts
Jun Sams Deposit Return
Feb Sams Expense Food
Dec Freds Expense TV

Would become:

Sheet or File Sams
Date Company Info1 Info2
Jul Sams Expense Desk
Jun Sams Deposit Return
Feb Sams Expense Food

Sheet or File Freds
Date Company Info1 Info2
Jan Freds Expense Doughnuts
Dec Freds Expense TV

View 6 Replies View Related

Excel 2007 :: Controlling Rows Via CheckBoxes?

Feb 27, 2012

I have a spread sheet whereby it contains:

- 12 unique values in column 6 which represent states within the country.
- 7 unique values in column 25 which represent the types of services.
- 5 unique values in column 27 which represent the days for doing the services.

I also have a user form that contains CheckBoxes equivalent to all above unique values, and I want the CheckBoxes to do the duty of a filter, whereby after selecting the needed CheckBoxes and clicking on a seperate botton "creating report", I want to show on the spread sheet only the rows of the values being checked and all other rows which don't contain the needed values should be either hidden or deleted.

I'm using Microsoft 2007 on Windows 7.

View 2 Replies View Related

Excel 2007 :: RANK Within Only Some Of Table Rows

Apr 22, 2012

Excel 2007 holds data of mine in a "format as table" Table. I want to rank the values in one column. Normally I want to do that by ranking the value in the current row against all the remaining values in that column. That is easy.

I got stuck today when I wanted to rank the value of the field in the current row with only a subset of the values in the column. I want to rank the current against the half-dozen or so records that have "A" in an adjacent column, and rank values having "B" in that other column against only the other values a "B" and so forth.

It would be best for all this to be done in formulas in the table rather than a clever use of a pivot or other? But really, I may be open to different approach than I was trying for if I can use successfully!

View 2 Replies View Related

Excel 2007 :: Select Empty Rows

Oct 29, 2012

Is there a way to select completely empty rows in Excel 2007 (Win 7)? I have found directions for highlighting empty cells (f5, Special, Blanks...), but sometimes the cells selected will be in rows with other filled cells in them so that doesn't really do what I need.

View 7 Replies View Related

Excel 2007 :: VBA To Find Unique Rows

Jul 29, 2013

I am wanting to find rows that with unique values in the first column, and then take those rows and display them in a more readable format. The section titled input is an example of information that would be pulled from a query into Excel. The Desired Output section is how I would like the info to be displayed. If this is possible without VBA then that is even better.

Excel 2007
A
B
C
D

[Code].....

View 2 Replies View Related

Hiding Some Not All Rows / Columns With Headings

May 18, 2014

How do I get the effect of hiding unused rows/column in the sheet, including headings, while the parts in use still display headings?

The pick below explains what I mean. [IMG][/IMG]

View 2 Replies View Related

Excel 2007 :: Combining Data In Duplicate Rows

Aug 15, 2008

I have a long (about 180 000 rows) list of part numbers, descriptions, prices and quantities. There are many duplicate part numbers. I need to go through and find the duplicates, add all their quantities into one cell and delete the remaining duplicates. I have used conditional formatting to find the duplicates easier but cannot use the remove duplicates button as it will delete the whole row and I need the quantity information in each row.

Any formula or macro I can set up to search the part number column (F) for duplicates and add the figures in the quantity column (J) and THEN delete the duplicate part number rows?

Maybe I need to put the new combined information in another sheet?

View 8 Replies View Related

Excel 2007 :: Copying Formulated Rows From One Sheet To Another

Dec 18, 2013

My knowledge of Excel 2007 is minimal, from formatting individual cells, to creating column totals. I've used it for years in my household budgets. I have an attendance form which is about 3 pages long; currently, it's separated at page breaks, with column totals at the bottom of each 'page'. This is easy because the Row #s are infinite, right? Lately there have been regular adjustments, and I believe the project might be less cumbersome if it were spread out on separate sheets, but how to bring the rows of column totals to cumulative totals on the last sheet.

View 6 Replies View Related

Excel 2007 :: Removing Blank Rows - Autofilter

Nov 8, 2011

I have several sheets with about 250,000 rows per sheet.

But, even I sort by Column A, there are STILL hundreds or rows that are total blank interspersed down the page . . . I can't autofilter for blanks because there is too much data . .

How can I get rid of them?

View 2 Replies View Related

Excel 2007 :: Delete Rows If Value Is Found In Column S

Jan 23, 2012

I'm using this code to find values of "FEP MHS" or "LSD MHS" in column S and if column S containes either of these values it deletes the entire row from the spreadsheet. I need this to work on a spreadsheet that runs on a daily basis and each day it contains a different number of rows. I have used this code to successfully delete most rows that contain these values in Column S but for some reason it does not delete all the rows, typically leaving 6 - 7 rows that contain these values. I'm using Excel 2007 I need code that finds the last row used and deletes the entire row if these values are present.

Dim CelRSLHMHSD As Range, RngRSLHMHSD As Range, iRSLHMHSD As Long
Set RngRSLHMHSD = Columns("S").SpecialCells(xlConstants, xlTextValues)
For iRSLHMHSD = RngRSLHMHSD.Count To 1 Step -1
If RngRSLHMHSD(iRSLHMHSD).Value = "FEP MHS" _
Or RngRSLHMHSD(iRSLHMHSD).Value = "LSD MHS" _
Then RngRSLHMHSD(iRSLHMHSD).EntireRow.Delete
Next iRSLHMHSD

View 1 Replies View Related

Excel 2007 :: Disable Insert Columns / Rows Only

Mar 1, 2012

I am looking for a way of allowing users to edit the existing cells at their will, but simultaneously disabling the option to insert/ delete columns or rows.

By enabling Sheet Protection, I cannot find a way to do it. Can I?

I am on MS Excel 2007 by the way.

I found the way, just unlock all cells in Format Cells, Protection Tab. Then Protect sheet and de-select what you want to disable.

View 1 Replies View Related

Excel 2007 :: Autofilling Value To 4 Rows Beneath Last Value In Column?

Jul 24, 2012

I am still new to this, and I pulled this code off of another site.

Background:
- Using Excel VBA, 2007
- I have a sheet that has a name in B6, has 4 blank spaces beneath, and then another name, 4 blank spaces, etc.
- I wrote a code to fill each of these 4 blank spaces with the value at the top of each
- The code works, but it won't fill the 4 spaces at the bottom of the column.

What is needed:
-how I can adjust to code below to fill in the 4 spaces beneath the last value in the column?

Code:

Sub FillBlanks()
Dim rRange1 As Range, rRange2 As Range
Dim iReply As Integer

[Code]....

View 3 Replies View Related

Excel 2007 :: How To Duplicate Rows Based On Cell Value

Feb 26, 2014

What im needing is something that will duplicate each row based on Column F as shown below... However I also need the duplicate row numbers added to Column G and then the original row deleted... I will try and show you an example of the input/output i would like to achieve: (also the first row can be ignored it will all be headers)

INPUT

ROUTE
NAME1
NAME2
ADD1
DESC
3
WOOD000001
PW
ID

[code].....

View 1 Replies View Related

Sorting Rows Of Data Into Columns With Headings

Aug 30, 2013

I have hundreds of rows of data which I need to sort into headings in a new tab.

E.g Column D has about 40 names which occur many times. Column G has 4 digit numbers which are unique.

I want to create in a new tab a column for each of these 40 names, using that name as the heading and then list the 4 digit numbers unders that heading. So if the name name "John" appears 20 times in Column D, it will get a heading in the new sheet and there will be 20 unique numbers listed below it from the data in Column G.

View 3 Replies View Related

Insert Rows & Headings Based On Cell Value

Jan 1, 2007

Inserting Rows and Headings. Is it possible to automatically insert Rows and Headings based on the Cell value of a particular column ? For example column B consists of a field called, 'Assigned Group'. Column A consists of a field called, 'Fault description'. Column A needs to have a heading depending on the value of Column B. One row also needs to be inserted above the heading.

View 6 Replies View Related

Excel 2007 :: Subtotals With HIDDEN Rows AND Columns Given Some Criteria

Aug 8, 2014

I am trying to develop a compliance report with Excel 2007) based upon a simple pass/fail criteria. The subtotals must be tracked both by Device (column) and by Requirement (row). There are macros (not included in the attached sample) that hides both columns and rows. I successfully found an example which I modified to correctly calculates data for a column when rows are hidden (see GOOD function below). However, I'm totally clueless on how to calculate data by row when columns are hidden (see BAD function below). What I'm trying to figure out is highlighted in red in the attached spreadsheet.

GOOD
=SUMPRODUCT(SUBTOTAL(103,OFFSET(B$2:B$5,ROW(B$2:B$5)-MIN(ROW(B$2:B$5)),,1))*(B$2:B$5="Pass"))

BAD (returns 0 and includes a circular reference)
=SUMPRODUCT(SUBTOTAL(103,OFFSET($B2:$F2,,COLUMN($B2:$F2)-MIN(COLUMN($B2:$F2)),1))*($B2:$F2="Pass"))

View 14 Replies View Related

Excel 2007 :: Transposing Many Rows And Columns To One Single Column

Oct 22, 2013

I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this

Event Name
Event Date
City
Country
Entry fee
Website

in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!

View 5 Replies View Related

Excel 2007 :: Macro - Move Duplicate Rows From One Worksheet To Another

Jul 4, 2014

I am using Excel 2007 on Windows 7 Home Premium 64bit.

My Workbook contains 2 Worksheets, both with the same headings in row 1. Sheet2 is initially empty, except for the headings in row 1.

The following is a sample of the data in Sheet1:

[Code] ......

I want to create a Macro to operate as follows:

In the above sample data, rows 2, 4, and 8 are identical, so I want to copy rows 4 and 8 to Sheet2, and delete them from Sheet1.

Similarly:

Rows 3 and 9 are identical, so row 9 should move to Sheet2;
Rows 5 and 11 are identical, so row 11 should move to Sheet2.
Rows 6, 7, 10, and 12 are all unique, so should be unaffected by the Macro.

New records will be added to Sheet1 periodically, so the Macro will be used each time to move any newly discovered duplicates to Sheet2.

The Macro should make no assumption about how the rows are ordered, and should not change their order.

I have uploaded two Workbooks, such that Workbook1 shows the original data, and Workbook2 shows the result I want to obtain.

Attached Files :
Workbook1.xlsm‎
Workbook2.xlsm‎

View 14 Replies View Related

Excel 2007 :: Macro For Merging Data Of Alternate Rows?

Jul 7, 2014

Currently I am using Excel 2007. I want to merge data of alternate row of a particular column in Excel.Also i want to remove merged row. E.g.

Name City Pincode
John Mumbai
John 400009
Carol Delhi
Carol 110001
Carol Pune
Carol 411079

I want output to be ----->

Name City
John Mumbai-400009
Carol Delhi-110001
Carol Pune-411079

macro/formula for the above requirement..?

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved