I have several sheets with about 250,000 rows per sheet.
But, even I sort by Column A, there are STILL hundreds or rows that are total blank interspersed down the page . . . I can't autofilter for blanks because there is too much data . .
How can I get rid of them?
I have a worksheet with four data columns A,B,C,D starting in row 2. I want to add between every row, exactly 11 blank rows. So if we have:
Code:
A B C D
1 5 3 4
2 7 6 3
3 9 1 3
the end result should be:
Code:
A B C D
1 5 3 4
2 7 6 3
3 9 1 3
Do I necessarily need a macro for this? Or is there another quick and creative way to achieve this result?
Is there a quick way to remove blank rows quickly. I have a spreadsheet with over 8500 rows but some are blank.
View 8 Replies View RelatedI have to download a report through SAP and have written some pretty basic stuff to automate the formatting process, however, i still have to manually remove blank rows. I would like to be able to add the removal of theses rows as part of the code, one of the main problems that i see is that i run this report every week and the empty rows are not necessarilly in the order every time.
View 4 Replies View RelatedCan someone look at the sheet sample? I am trying to turn duplicates into a zero like Ive done in record 1 so that the same tax bill is not counted twice. The records are in rows and if I do a transpose and try to do it by hand it will take forever cause I have hundreds of records.
Excel 2007
BQBRBSBTBUBVBWBXBYBZCACBCCCDCE1txt_nme_taxpayertxt_nme_streetcity state txt_addr_1txt_parcel
Year 10Year 9Year 8Year 7Year 6Year 5Year 4Year 3Year 2Year 12QUINCY'S REALTY INC % RASH & A19900
HOLIDAY LNCHARLOTTE, NCPO BOX 16003192170500.55516.22712.71768.860000780.713FERGUSON, BENJAMIN10733
MONTECARLO DRCHARLOTTE, NC3508 SARGEANT DR151840720.4423.5180.381.988.2387.689.1789.1789.1789.174HARVEY,
[Code] ........
I have created a file where I use the Subtotal function. Once I collapse the information to only give me the Total, I would like to copy the Total rows into another worksheet. However, when I do this I get blank lines in between. I am trying to find a way to delete the blank rows in between the Total rows I need. Is there a way to do this with the auto filter function?
View 1 Replies View RelatedI have recived a CSV file with dollar amounts that need to be formated with out a deciaml and with our rounding. Example I need 12558.64 to be changed to 1255864.
View 3 Replies View RelatedI'm using Excel 2007. I'd like to be able to autofilter on a particular value that I put in cell J5. How can I do that syntactically?
View 4 Replies View RelatedI'm working with a very large spreadsheet which has somehow divided itself into print areas. Each section has 'Page 1' or the equivalent as a background, behind the data itself. I thought it would be simple to remove this, but for the life of me I can't see how. I'm using Excel 2007.
View 6 Replies View Related I've got a whole load of cells that have a pipe ( | ) on the end of the value which I'm trying to remove.
Easy enough thinks me, so;
Code:
=LEFT(AB188,LEN(AB188)-1)
And then Copy / Paste Values Still has a pipe on the end... I check the cell for trailing spaces, there are none...
I check the length of the cell (658) against the length of the result from the formula (657)...
So, my formula works, but when I copy and paste as values the pipe remains.
I'm using Excel 2007 and the cell contatins other pipe characters I'd like to keep in there so I can't find and replace or anything.
I am using Excel 2007 on Windows 7. I would like to remove duplicates as follows: If column A = column A, column B = column B, and the two rows are within one hour of each other, then remove all duplicates, leaving one instance of the row. As you can see, sometimes the duplicates are right next to each other, and sometimes have rows between them. (Rows 1 & 2, Rows 30 & 32). Even though this sample doesn't show it, sometimes there can be tens of duplicates within an hour, not just two.
Excel 2007
ABCD1EruptionI Can't Stand The Rain (78)3/7/20129:12:55
AM2EruptionI Can't Stand The Rain (78)3/7/20129:10:02
AM3ChicagoJust You 'N' Me (73)3/7/20129:05:59
[Code] .........
Code:
Selection.AutoFilter Field:=5, Criteria1:=Array("CHF", "DKK", "EUR", "GBP", "NOK", "SEK", "USD")
I am trying to use VBA to filter a list for not equal to. See line above. I want to filter a table I have for unknown Currencies basically.
The title in the attached chart is a camera shot transferred from another excel 2007 worksheet in the same workbook.
I'd like to remove the border line, I've tried right clicking... then format picture ...no dialogue box comes up. I've scrolled through all the commands in the ribbon + non ribbon commands and can't find anything that seems appropriate that's not greyed out ....
border line.docx
When I duplicated a worksheet in Excel 2007, I received a warning that "A formula or sheet you want to move or copy contains the name ___" (an existing Name) and was given options. The Name in question should not have been relevant because I never intentionally linked it to the worksheet that was being duplicated, but apparently something happened at some point to create such a link.
I opened Name Manager and deleted the Name in question, and this invoked a warning. "Privacy warning: This document contains macros, ActiveX controls, XML expansion pack information, or Web components. These may include personal information that cannot be removed by the Document Inspector." I had no macros. Each time I attempted to save the document, I got this error/warning, even after disabling Macro Security completely.
It was still saving, fortunately, so I closed Excel and relaunched, and the issue seemed to vanish.
Should I be worried about the integrity of my document? Everything seems fine now, but I'm a little concerned.
I am facing problem to delete the blank Space before & after the sentence in excel Cell.I have thousand No. of Rows for which I want to delete the Empty Space before & after the Sentence.May I know how I will do this in quick way.
View 2 Replies View RelatedI am having trouble delete a drop down list inspite of selecting clear all from the data validation tab in excel 2007. When I hit Alt + Down Arrow, I still see picklist options. I didnt set up the spreadsheet, hence I am not sure how to begin troubleshooting.
View 1 Replies View RelatedI have a sheet in an excel workbook which I export to a separate file and then save as a text document, I need to remove the tabs in this file, however the file (example attached) needs to be in a certain format to be imported into a piece of equipment which has a proprietary file format. Part of this format is the 2nd row and 5th row must remain present and empty.
[URL]
I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
View 1 Replies View RelatedI have 5 worksheets that I currently have to add information to and cut/paste information from one to another. The initial information stays the same but I have to cut and paste it into one of the other worksheets based on wether or not we; need to decide on a job, are working on the job, lost the job, won the job or the job is complete.
I would like to create one master worksheet where the information can be entered with a drop down cell stating the status of the job (listed above). I created the master tab and linked the 5 subordinate tabs using an IF formula, but how can the subordinate tabs filter or sort the references and organize them on the top of the page rather than leaving a bunch of blank rows (because the info in these blank rows went to a different subordinate tab)? I want to enter the info in the master tab and simply change the pull down cell to change which subordinate tab the information shows up on. This should allow me to print the subordinate tabs as reports without having to manually cut and paste the info or filter it, correct?
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedI have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
Anyone know of a way to detect if a cell is blank in a closed workbook?
Here's what I'm trying to do:
=IF(ISBLANK(closed workbook cell reference),NA(),closed workbook cell reference)
also tried:
=IF(closed workbook cell reference="",NA(),closed workbook cell reference)
Neither one worked. I'm using Excel 2007.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
View 10 Replies View RelatedI am using a ComboBox in Excel 2007 in a UserForm. It is drawing on a row source which populates empty cells duplicates. How do I get the drop down box results to only show unique values and nonblank entries?
View 4 Replies View RelatedPlease find attached a daily copy of a spreadsheet that is used to monitor train running times.
The columns on the left - "Serv No, Serv Start Date,Train No:, Scheduled Arrival, Scheduled Depart" are provided to us automatically and the underlying cell formatting/formula cannot be changed. This information is cut directly from a daily report sent to us the previous day. The cell formatting for the start date is custom - dd-mm-yyyy hh:mm.
The sheet is usually locked out with user access only to the left hand side to cut and paste train times in and the input columns on the right hand side. User has no requirement to adjust any details in the left had column apart from to add additional trains at the bottom is need be. I have left the loaded sheet blank and complete with all underlying cell formatting, conditional formatting and formulas intact for you to play with.
Both sheets essentially do the same thing so whatever formula changes are made to the empty sheet can be adapted for the loaded sheet.
For simplicity, I will focus on the empty sheet. What I am mucking around with is having the user input the train arrival time in the "Actual Arrival" column - (column F)
What I am looking at then making occur is the spreadsheet automatically filling the adjacent columns with the appropriate text and calculations.
To do this excel needs to compare column the number (cell input is text formatted) as a number with the arrival time in column G. It then needs to calculate if the train is Early (16 minutes or more before scheduled arrival), on time (+/- 15 minutes either side of scheduled arrival) or late (16 minutes or more after scheduled). It then needs to automatically place the letter "E", "O" or "L" in column K and the time differential in column L.
My problem is two fold.
Firstly, I cannot seem to make the spreadsheet automatically enter a letter into column K depending on the above conditions.
Secondly, I have had limited success in having the spreadsheet compare column J with column F and working out the differential. However, this only works if the time remains linear. IE only if the train runs on time or late. It gives an incorrect time differential if the train is early. I will attach this spreadsheet tomorrow as an add on to this post.
DAILY TRAIN RUNNING.xlsx
how can I write a routine to add rows in one Sheet if a condition which involves a different Sheet is met (excel 2007).
In Sheet 1 is a list of ("liquid") names (cells C4:C26) which will need to be expanded should the IF condition be satisfied. In row 27 I have a subtotal (whihc is using data from columns D onwards), and from row 29 down cells are not empty.
The condition I want to verify is in Sheet 4-column I, where it is reported whether a name is classified as "liquid" or "illiquid". If the number of "liquid" names in sheet4-column I is more than the number of names in Sheet1-C4:C26 I would like to add as many rows as the difference between the two lists. Also I would like to make sure that the subtotals that I have in row 27 (and that will be shifted down when new rows are added) will also inlcude the data in the new rows (the subtotal is taking data from columns D onwards).
Should the code need to inlcude the name of the tabs, Sheet 1 is called Summary and Sheet 4 CDS Data.
I have a large file with a bunch of color coding and need to delete my red rows only.
View 3 Replies View RelatedI have a list of about 4,000 contacts each with about 2 or 3 products with us. Each product creates a new contact row.
I would like to merge each row with the same contact into one row.
I have attached an example : Example test.xlsx
Trying to freeze top 2 rows as headings.
I select top two rows then
Under VIEW / FREEZE FRAMES I select Freeze ... according to current selection.
But what freezes are rows 1-15 and colums A-N, which I never selected.
How do I get Excel to freeze just the top 2 rows?
I have a macro that exports a row (or rows) to destination sheet ("Amber") based on criteria in Column K. Once exported I return to the source sheet ("Register") and the row that had the data that I wanted exported has exported the info but the row just sits where it was and appears to only 'clear the contents'. The macro I use is:
Sub Extract_FW_Rows()
Set ws = ActiveSheet
endrow = ws.Cells(65000, 1).End(xlUp).Row
For i = endrow To 1 Step -1
[Code] ......
I set up the macro on Excel 2002 in work as thats what we have....however when I input the same code into my home laptop working Excel 2007, all works perfectly i.e. it cuts the data to destination sheet, goes back to source sheet and the rows have moved up accordingly - I do realise that the action taken is a row removal i.e. I had 1000 rows, macro executes, I now have 999 rows in the source sheet.
What I would like is the same result in 2002 as I get in 2007.