If I have a cell which begins with a few spaces and then has a character, how do I use the find function to see how many spaces until some character is present in the cell. The * does not work with this.
where i copy up to 1000 products ID's like this: "1234567890 AA11111"(ofcourse there is allways differend code for every product its just a example :)) and paste it to exel, and the problem is i need only the 10-digit number (it's allways 10-digit number but the second one is sometimes diffrent) so it is possible to make makro that will remove every character after 10th character ?
Can someone look at the sheet sample? I am trying to turn duplicates into a zero like Ive done in record 1 so that the same tax bill is not counted twice. The records are in rows and if I do a transpose and try to do it by hand it will take forever cause I have hundreds of records.
I have recived a CSV file with dollar amounts that need to be formated with out a deciaml and with our rounding. Example I need 12558.64 to be changed to 1255864.
I'm working with a very large spreadsheet which has somehow divided itself into print areas. Each section has 'Page 1' or the equivalent as a background, behind the data itself. I thought it would be simple to remove this, but for the life of me I can't see how. I'm using Excel 2007.
I have several sheets with about 250,000 rows per sheet.
But, even I sort by Column A, there are STILL hundreds or rows that are total blank interspersed down the page . . . I can't autofilter for blanks because there is too much data . .
I am using Excel 2007 on Windows 7. I would like to remove duplicates as follows: If column A = column A, column B = column B, and the two rows are within one hour of each other, then remove all duplicates, leaving one instance of the row. As you can see, sometimes the duplicates are right next to each other, and sometimes have rows between them. (Rows 1 & 2, Rows 30 & 32). Even though this sample doesn't show it, sometimes there can be tens of duplicates within an hour, not just two.
Excel 2007 ABCD1EruptionI Can't Stand The Rain (78)3/7/20129:12:55 AM2EruptionI Can't Stand The Rain (78)3/7/20129:10:02 AM3ChicagoJust You 'N' Me (73)3/7/20129:05:59
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
The title in the attached chart is a camera shot transferred from another excel 2007 worksheet in the same workbook.
I'd like to remove the border line, I've tried right clicking... then format picture ...no dialogue box comes up. I've scrolled through all the commands in the ribbon + non ribbon commands and can't find anything that seems appropriate that's not greyed out ....
When I duplicated a worksheet in Excel 2007, I received a warning that "A formula or sheet you want to move or copy contains the name ___" (an existing Name) and was given options. The Name in question should not have been relevant because I never intentionally linked it to the worksheet that was being duplicated, but apparently something happened at some point to create such a link.
I opened Name Manager and deleted the Name in question, and this invoked a warning. "Privacy warning: This document contains macros, ActiveX controls, XML expansion pack information, or Web components. These may include personal information that cannot be removed by the Document Inspector." I had no macros. Each time I attempted to save the document, I got this error/warning, even after disabling Macro Security completely.
It was still saving, fortunately, so I closed Excel and relaunched, and the issue seemed to vanish.
Should I be worried about the integrity of my document? Everything seems fine now, but I'm a little concerned.
I am having trouble delete a drop down list inspite of selecting clear all from the data validation tab in excel 2007. When I hit Alt + Down Arrow, I still see picklist options. I didnt set up the spreadsheet, hence I am not sure how to begin troubleshooting.
I need your guys expertise in the following formula. I'm applying the following to a large range of data that varies in lenght,however all of the data has a 1Y or 2Y at the end of it. I need to remove it from the data into a new column. Currently I'm using =trim(mid(A2,1,30) how can I change my formula to obtain my results?
The barcode lablels all have the following format: A318639....that is a letter followed by six numbers.
When I scan the barcodes into any cell, a dollar sign "$" appears in the front of the barcode string that is entered into the cell. The dollar sign is not a relevant part of the string of characters in the barcode label.
What I am looking for is a solution where upon scanning a barcode into any cell, the dollar sign is removed from the front of my string and I am left with just the seven character string which is shown above.
I have experimented with the Data Validation tool by trying to limit the number of characters that are allowed in a cell to seven characters, but that has not actually removed any characters from my data string.
find a formula or function where i can remove the last 4 digits from cells. I have a spreadsheet where there was might have been concatenation do where 4 digits were added to the end of part numbers in a cell. I need to remove just the last 4 digits so that I can do matches later on. Each cell has a different number of characters and i just need to remove the last for Example 154758NE20 or NFD148574DE11. Need to remove the NE20 and DE11 respectively.
I am facing problem to delete the blank Space before & after the sentence in excel Cell.I have thousand No. of Rows for which I want to delete the Empty Space before & after the Sentence.May I know how I will do this in quick way.
I have a set of data that has a company name using commas to separate INC and LLC from the company name. e.g. Acme Explosives, LLC
I'm using Excel 2010, and when I try to use the find/replace functionality to find commas, I get an error message saying "We couldn't find what you were looking for. Click Options for more ways to search.
Short of editing all the fields manually (only about 300, so not too bad), I'm hoping there is a simple way to replace these commas with nothing.
------ A ------------------- B John123@gmail.com--------Blue Bill323@gmail.com ---------Red Sue223@gmail.com -------Green Sue223@gmail.com -------Yellow Bill323@gmail.com ---------Red Bill323@gmail.com --------Yellow John123@gmail.com ------Yellow Sue223@gmail.com --------Blue
- C --------------- D --- John ------------Blue, Yellow Bill --------------Red, Yellow Sue------------Green, Yellow, Blue
I am using Excel 2013 on Windows 7. In the above example columns A & B is the given list to process, and Columns C & D contain the result I am trying to achieve. The major part of this that I am having trouble on combining, separating them with commas in another cell, and ignoring a duplicate value. You can see bill has two red values, but I only need it displayed once in column D.
I have a cell which will contain SER01+SER02+SER03
and what i need it to contain is [SER01]+[SER02]+[SER03]
and shocker is i've got this to work for the first instance but not the other two
code as below... be grateful for your help
Sub measure1() Dim list As String, pos As Integer, refl As String, refr As String, newlist As String list = Cells(1472, 16).Value pos = InStr(list, "+") refl = Left(list, pos - 1) refr = Right(list, pos + 1) newlist = "[" & refl & "]" Cells(1472, 17) = newlist End Sub
Figured out how to export to Pipe Delimited through coding but now I am faced with 2 complications.
1) The column order in the EXCEL file is not the Order I want it to Export in. (i.e. COB Date maybe in Column 'I' in the Excel File but when I export it into .txt I need it to be in the First Column)
2) I need to have the header name Changed in the .txt file (i.e. COB Date is the name in the EXCEL file but I need it to show as cob_date in the .txt file)
I have the following code (borrowed) which converts the current .xls worksheet to a tab-delimited .txt file. The problem is that i need to add a PIPE to the end of each row/record as well, so that the records would look something like this:
A|123| B|456|
currently there is no PIPE following the last character (3 or 6) and i am getting this:
A|123 B|456
I was hoping there would be a way to revise the VBA to add a PIPE at the end of each row/record.
I have the following code (borrowed) which converts the current .xls worksheet to a tab-delimited .txt file. The problem is that i need to add a PIPE to the end of each row/record as well, so that the records would look something like this:
A|123| B|456|
currently there is no PIPE following the last character (3 or 6) and i am getting this:
A|123 B|456
I was hoping there would be a way to revise the VBA to add a PIPE at the end of each row/record. Here's the ...
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
Whenever she clicks on a cell, the cell to the right of it is also selected. When she tries using tab to move to a new cell, she can only move between the two selected cells. Same with using the enter key. As such, it is extremely difficult for her to modify only one cell, since she always has two selected.
The F8 key, as well as Ctrl+F8. However, pressing the F8 key only adds more cells to the autoselection, and Ctrl+F8 allows her to select one cell, but also highlights the cells around it, and when we tried to select other cells, every cell we clicked stayed highlighted.
Additionally, sometimes when she clicks a cell, it will just select that one cell. Click it again, and the problem is back. I haven't been able to determine any patterns to this behavior, and I know there is no problem with the input (the keyboard and mouse are standard-issue in our lab, and we keep them well maintained).
