We have a 2007 Excel workbook with the same "watermark" on every sheet. For some reason on 2 pages of the workbook the "watermark" has begun to show up in front of the data on spreadsheet rather than behind data. How do we highlight watermark and place behind data again? Watermark was added through the "Add Header" function originaly and is working fine on all but two worksheets.
View 1 Replies
I have a number of houses & a number of water plants (as in water processing plants, not the green kind!) Each water plant can provide a certain % water coverage to all properties. 'All Properties' is classed as the number of houses + the number of water plants. The 'coverage' as a percentage is given by the formula:
View 5 Replies View RelatedWhy this sql query doesn't return values? My excel version is 2007.
Code:
if object_id( 'TEMPDB..#TMPDOC') is not null
begin
drop table #TMPDOC
end
create table #TMPDOC (Code varchar(5) NOT NULL)
[Code] ...........
I am currently using MS Office Excel 2007 and my limited VBA knowledge has put me at a stop of a project that I have been working on. I am trying to create an excel template that will open every word document in a specific folder and pull data located in the title of the document.
For example, I want the spreadsheet to open every document and pull info from the title that would look similar to this:
"line of business";"policy #";"dollar amount";"name";"line of business" and etc.
The semicolons in the title would partition the data across a few cells.
Below is the coding that I currently have, This is my timestamp. Column A adds a timestamp whenever data is entered into the corresponding cell in Column B. Because of this, I need data to be pulled from Word documents and inserted into Column B.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Rng As Range
For Each Rng In Target
If Not Rng.Value = vbNullString Then
Select Case Rng.Column
[code]....
Below is some coding, but not very specified to my specific needs.
Sub SplitValue(Rng As Range)
Dim avarSplit As Variant
avarSplit = Split(Rng.Value, ";")
Range(Rng, Rng.Offset(, 4)).Value = avarSplit
If Left(Rng.Value, 2) = "RE" Or Left(Rng.Value, 2) = "FW" Then
[code]....
Also not sure if the word document is to be pulling information from the title, if I would need to negate ".doc" from data being imported.
I need to generate a microsoft word document from the data encoded in my excel spreadsheet. I am currently using MS office 2007.
in the Excel Spreadsheet from columns C to F "a) b) c) d)" was not typed but in the word document it automatically appears before the choices encoded in excel. Another thing is that some of the choices typed in the excel spreadsheet are in bold font and I want it to be generated in word document with the bold font as well.
By the way I am planning to use this technique to create a 100 item multiple choice exam for my students as I find using EXCEL to generate the document a lot easier than creating the test manually in WORD.
I need a script that will turn a excel doc into a txt doc. Thats the easy part. The hard part (at least I think it is), is I need it to be in a certain format and I'll do my best to explain that fomat below.
View 9 Replies View RelatedI have an Excel chart graphing two data records. As the data points cross, one is in "back" and one is in "front". I would like to reverse the current layout. Is this possible?
View 1 Replies View RelatedHow to move the data from the back column to the front as below
A
B
C
2
3
1
3
1
2
to
A
B
C
2
3
1
3
1
2
I am making a chart for displaying the amount in inches that we have in the water tanks.
The idea is to have a setup like this...
I am trying to create an interpolation for water flow in a given area. Tables below for better understanding:
Inputs Required
Area
3
km2
L
5
km
L2/A (Calculated)
8.3
[Code] ......
The idea is that when I increase the input area, I would like to interpolate between the RFFP frequency for the flow Q50/Q20 that best fits the area and provide me with a peak flow rate.
My spreadsheet looks normal and I've been using it for months. Today some of the text characters print out as boxes with a question mark. I tried another spreadsheet with the same result. I reset the printer and re-booted my pc with no luck. I did try the Q&A and used =CODE(MID(A1,1,1)) which resulted in 68. But I don't know what to do next.
By the way, the spreadsheet does not show the question marks, only the print out.
******** type=text/javascript>*********>******** type=text/javascript src="http://pagead2.googlesyndication.com/pagead/show_ads.js">*********>
I tried locking an excel document and i ticked a box that said protect structure, and then entered my password and now I cannot open the document. It is a white square on my desktop now with no options to do anything, it cannot even be attached to an email or deleted. This was on excel 2008 on a macbook.
When I copy from Excel 2003 (values & formulas) and paste special into Excel 2007 i get the option screen to select unicode text,sylk etc instead of the other screen with the option of values,formulas,formats etc.How can I select the option for value,formulas?
Sorry cannot attach a screen shot as it is above the allowed limit.
I have a problem with my formula. As you can see, i want to get the CIM number of the Team Leaders (TL Name) when i change the dropdown list of the campaign. But what im getting is the repeated CIM numbers.
Here's my formula:
=IF(ISERROR(INDEX('Team Data'!$F$2:$F$5489,SMALL(IF('scorecard (OM Search)'!$C$12='Team Data'!$E$2:$E$5489,ROW('Team Data'!$E$2:$E$5489)-MIN(ROW('Team Data'!$E$2:$E$5489))+1,""),ROW(A1)))),"",INDEX('Team Data'!$F$2:$F$5489,SMALL(IF('scorecard (OM Search)'!$C$12='Team Data'!$E$2:$E$5489,ROW('Team Data'!$E$2:$E$5489)-MIN(ROW('Team Data'!$E$2:$E$5489))+1,""),ROW(A1))))
In my PC it's showing all correctly but show some junk characters as shown in attached screenshot in other's PC
How can I configure Excel version to show it correctly?
We have a Shared workbook on our Server and about 5 users work at the same time every day. I want to understand something, If I open it I can see all the information in it, all the rows and so on, but if the same workbook is opened by another user he will see other information, the rows aren't the same as in my case. Why does this happen ? I would like the second users to see the same information as I do.
View 1 Replies View RelatedI need to add a background picture to a spreadsheet that only shows on the print area.
This spreadsheet is being used as a pro forma invoice that can be emailed to customers for them to view & print as required.
At the moment I can add a background image but this appears throughout the sheet and not in the place I need it to i.e. the print area.
The other day I inserted a row in a shared workbook and then saved it. On my screen, the inserted row was visible and was the correct row height of 12.75. My goal was to insert the row so another user sitting next to me could enter information in the new row.
After I saved the workbook, and after the user sitting next to me saved her workbook, the row I inserted should have appeared exactly the same on her screen, but it did not. Instead, the inserted row showed up as a hidden row on her screen. It was there, but the row height was collapsed to the point of invisibility.
I repeated my attempt to insert a row which the other user could edit several times, but each time I got the same result. I could not make the row show up on her screen with a row height of 12.75.
Shared workbook in Microsoft Excel 2003?
I have a file that has been produced using Statistica software. The file is supposed to have around one million rows, and when exported to Excel the file is about 30 MB. When I open the .xlsx file in Excel 2010 only two pages of data appear. The rows also have weird numbering. The first square of the A column is A1. The second is A3833, the third is A6789, then A8161, then A8162, then A8163, then A8164, then A18070.
The scroll button to the left of the screen is long, as if the document was only two pages long. When the scroll button is click-and-dragged a small beige square appears with a row number. This small square seems to be aware that not all rows are shown as it shows many more rows than are visible to me.
When using 2013 Excel in the Home tab, line 1 is not visible. Using the File tab will show line one, but the Home title bar is unavailable. Toggling back and forth is not efficient. No one in this office has ever seen an Excel program not display a full page under the title bar in the Home tab.
View 1 Replies View RelatedI'm using Excel 2010.
A formula I am using is outputting "0" instead of the expected value. Upon evaluating the formula I realized that this was because some of the values - years, in this case - had quotes around them while others did not. Please see the image below for the screenshot of the evaluation.
These values - the years - are being evaluated in the following formula.
Code:
=SUM(
IF(inventory!$F$3:$R$3=$A3,
IF(inventory!$B$4:$B$56=$G$1,
IF(inventory!$D$4:$D$56=$G$2,
inventory!$F$4:$R$56))))
This formula references the following sheet (an excerpt from that sheet). You can also see the formulas found in the cells causing the problem.
*ABC5212/20/20102010Adjustments53*20112011543/17/20112011Carwen Printers559/9/20112011Adjustments569/9/20112011Copeland Printing
Spreadsheet FormulasCellFormulaB52=IF(A52="",C52,YEAR(A52))B53=IF(A53="",C53,YEAR(A53))
B54=IF(A54="",C54,YEAR(A54))B55=IF(A55="",C55,YEAR(A55))B56=IF(A56="",C56,YEAR(A56))
I suspect that the problem is being caused by the output of the formula in these cells. If I simply type in "2011" instead of using the formula in B52:B56, then the first formula in the code section above does not have a problem.
How I can reconcile this?
I want to add these document properties I created to a cell ("A1" or any of the cells) without doing any VBA programming. Is this achievable in any case?
DocProperties.PNG
Field A which I need to convert into two cells.
So I would have two columns for which would give me the split of A
A) 6210220121120
What this needs to be is 62102 in one field
The other field it needs to read as a date (which is backwards) and this would be: 02/11/2012. As you can see that is how the field is.
Last four digits is the DD/MM backwards and the year is forwards.
Some time ago, a friend of mine told me he didn't use any Pivot Tables at all, due to the imense space they require.
Instead, he made connections between Forms in Excel and the Databases using SQL.
Do you know of any Internet site where I can start to learn something about this?
I am processing a fair few Invoices, which are being sent to me via e-mail as excel documents, very often they contain mistakes, a decent amount of mistakes. Usually the prices are wrong.
I keep track of every single entry on the invoice on my own document - Tracker, which I consider to be the superior/more correct document to the Invoice presented to me by my contractor.
Both of the documents have a reference number, which is a specific docket number, and horizontally, in the invoice, there is going to be a price for this docket. In my document, there is going to be a separate column for the total price.
Is it possible (I guess with VBA) to check for mistakes in the Invoice, but use the Tracker as a reference for this check.
Tracker has
columns
A - Name
B - Department
C - Date
D - Docket No.
C - Total price for the docket (calculation of E to Z)
E to Z - all smaller entries
Invoice has
columns
A - Date
B - Docket No.
C to E price for that docket, but it is spread, because departments are separated out, so each VAT account can be charged accordingly. I guess it is possible to do a separate column for the price, if it is easier to do a script that way.
Basically, I need to check if in the Invoice document, the price (C to E) for Docket No. (B) is the same as the price (C) for the Docket No. (D) in the Tracker.
I would like the wrong entries to be highlighted on the Invoice Document, so I can see straight away, that this needs attention.
Not always the price is wrong, sometimes the Docket No. is spelled incorrectly (Dyslexic contractor), hence the highlighting.
We have mapped a network drive to a SharePoint Directory, while we are able to copy a file (using Macros) to this location, this file does not appear in SharePoint to the other users, the reason being that it is not checked in. How to Check using Excel Macros.
[URL] .....
I wonder is there a way in excel to replace multiple words at once. To have like script where I had all words that need to be replaced and words replacing those. And just click the button and done? More specifically I'm translating some exports in xls and there are few words repeating over and over again in every document. So for example I need to replace word parfem for perfume like 500 times in one excel document atd. I think there has to be a easier way to replace those words at once.
View 5 Replies View RelatedWhen an Excel document crashes, I get the option to recover the document the next time I open Excel. However, if it is a read-only file, I don't get this option.
Is there any way around this? I usually work in read-only documents, saving my changes to new documents. If the read-only file I'm working in crashes.
How do I add a password to protect the PDF that I create from my excel 2010 document?
View 5 Replies View RelatedWhen I click the general Excel program icon that use to just open a blank excel workbook, it now always opens the same existing file (apples.xls) If I am clicking on a different existing file (pears.xls), excel opens pears.xls and apples.xls.
View 4 Replies View Related
