I would like to know if we can display a label with values of two different cells when hovered over a cell in excel 2010. All I want is ,When hovered over a cell I want its corresponding row and column heaing to be displayed.
View 1 RepliesI need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
Is it possible to have a thumbnail of an image display in Excel 2010 and when you click on the thumbnail, it is viewed in its normal size?
View 2 Replies View Related how to display Sparkline from non-consecutive cells.
I want to display it from two apart ranges: A1:C1 and F1: J1
If it can't be done within the worksheet - is there a VBA code to workaround - such as filling-in an Array from the non-consecutive and using that Array as the Sparkline source ?
I tried multiple variations of searches for this, but can't seem to get this to work. I've been asked to perform some analysis on the number of direct reports for each manager in our company as well as the number of total reports. I have been able to calculate this with no problem. My difficulty comes with the request to be able to display this information in a particular way with Excel. (this is using Excel 2010)
What the VP would like to be able to do is to drill down on each manager to see all of their direct reports, and then, for any of those direct reports that are managers, be able to further drill down into those people's direct reports. The difficulty I am coming to is that, depending on the employee, there can be as many as 9 layers of management when I work this all the way up to the Executive Vice President Level.
My data is currently laid out such that my first 5 columns are identifiers such as employee id, employee name, job title and organization information. After that I have columns for the managerial hierarchy. For example first column of this (let's call it column H) is the EVP, the 2nd column (column I) is the Senior VP, 3rd column (column J) has the various reports to the senior VP, 4th column (column K) is the managers that report to those in column J, and so on, up to 9 layers.
For example, one of the employees in my finance area would have name of the EVP in column H, the SVP in column I, the director in column J, and their manager in column L. The remaining columns that could house hierarchy data are blank for them because of where they are in the hierarchy.
When I set up the pivot table, I placed each field of the managerial hierarchy in the row area and then the employee field at the end. The problem I encounter is that with all of the blank cells in the data due to the varying levels of the hierarchy, I get a lot of (blank) fields in the pivot table for any layer below where the person fits in (ie, for the example above, the EVP, SVP, and manager name come in find, but then it is (blank) on down to the employee name.) If I deselect (blank) in the field settings, it eliminates all of the rows that don;t go as far down in the hierarchy, i.e. I deselect (blank) at level 5, any employee that is 4 or less levels from the EVP does not appear.
I also tried doing the same as above but including the employee name in my hierarchy (so for the example above, the employee name would be placed in column M). This worked a bit, but then after every employee was the series of (blank) drill down options.
The ideal solution that I've been asked to come up with would be to have the data display as it does when I've set the pivot table up with the employee name in the appropriate hierarchy level, but not have the drill down (blank) show for those that don't have layers below them.
I am using Excel 2010 to create a simple chart. When I enter the information, highlight it and select a chart, the chart area appears blank. It doesn't matter what kind of chart I choose- it still appears blank. I've tried going into the Advanced options and indicating for All objects to be shown and that didn't work.
View 1 Replies View RelatedThe situation is that I have 3 interest income from 3 different companies. Column B acts as a helper column to determine if a partner receives just one interest income or receives multiple interest income. If they receive multiple interest income, I want column B to display a 1 and if not make it blank. If you notice partners 5, 9, and 16 contain two or more interest incomes (Columns C - E). All the cells are have either an amount (positive or negative) or a zero. There are no blank cells. Columns (F - H) contains the interest income amount if only that partner receives just one interest income. So for those partners they should not display any of their amounts. The reason is because I am using a word template and currently have to use multiple templates ( 3 in total) to display correctly for each partner. I got this to work with a word macro that will collapse all non blank columns in a particular table. This might be on a ongoing project for me as I do have more logic to solve.
Excel 2010
A
B
C
[Code]....
I am trying to hide the excel 2010 application, open a csv file on a network drive, show the excel application.
The problem is a "Downloading" progress indicator appears, during the workbook open event I assume.
Code:
Sub Macro1 ()
Application.Visible = False
Application.DisplayAlerts = False
Workbooks.Open Filename:="S:LOGT5.CSV"
Application.Visible = True
Application.DisplayAlerts = True
I have seen the similar progress indicator during the "Save" event too. How to hide this?
I use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
Example attached : Copy of CAB.xlsx
View 2 Replies View RelatedI have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
Pivot Chart. I would like to set up something to where a user can click on an individual value on a pivot chart (currently a line chart set up with 4 data series) and somehow display some underlying data. I have a lot of information stored in a data worksheet that I can't display all at once, but if a user sees a questionable data point, he/she can click and learn more about it from source data, or even a new query of the data worksheet.
I am using Excel 2010
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
Am using Excell for some times and understood the basic operations like VLOOKUP and other formulas, and it was really usefull. Now i have another requirement where i need to get all the values matching from another tab.
Below is the example: I will be entering all the values in Tab 2 manually. As well as i will be entering the Categories (Column A) in Tab1. I want the Values (Column B) in Tab1 to be populated.
TAB 1CATEGORY
VALUES
AA1
1
2
AA2
5
BB1
3
BB2
4
6
TAB 2
CATEGORY
VALUES
AA1
1
AA1
2
BB1
3
BB2
4
AA2
5
BB2
6
I have 2 problems in that
1) It is not dynamic, i have to change Tab 2 frequently.
2) values are listed below the categories
Is it possible to display a particular excel cell (for example cell A1) on Desktop permanently?
If yes then - HOW ?
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
we have a Excel 2010 worksheet containing multiple tables.
Table1
ColumnA ColumnB
1 Blue 12
2 Orange 14
15
11
3 Red 10
Table2
ColumnA ColumnB
1 Blue 11
2 Black 13
15
11
3 White 10
19
17
On a separate worksheet we want to calculate with the first worksheet's values.
For example: Calc1: Sum ColumnB IN Table1 WHERE ColumnA = Orange
How do we do such a calculation/formula?
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
I am using Excel 2010.
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I would like to accomplish 2 things in my Excel 2010 spreadsheet by click a cell which already has a number and formatting in it.
1. How do I change the color of the cell, the color of the number in it, and the border around it. (Make it look like I just pressed a button by clicking it.)
2. At the same time have the text in different cell and the number in the selected cell appear in another different cell. (Text in a different cell = A , and the number in the selected cell = 23, the value in the resulting cell be "A 23") Everything I would like to happen at the same time by clicking the selected cell. I would also like this to be done several times by clicking different cells and not changing the previously selected cells.
excel help.jpg
Basically it is a training matrix.
basically I need A30, A32, A34 and A36 cells to display the characters they are currently displaying but when i copy and past any of them into a new cell on the matrix for example into cell B11 I want to be able to SUM the total of that column and display it in cell B24
So to recap, I would like A30, A32, A34 and A36 cells to hold 25, 50, 75 and 100 as there value but this can not be displayed it is just a value which i can use to calculate.
I am ok if i have to link the cells with another worksheet but i have tried doing this also i dont know if i need to use VBA.
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies View RelatedWhat I'm trying to do is, create a formula that works like vlookup, except I want to return the value of the cell that is a specified number of cells below the looked-up data in a single column array. So, let's say cell A1 reads "Bacon". In B1, I'd like to put a formula which searches the array for the cell that contains "Bacon" and then returns the value of the cell underneath, let's say the value is "Eggs". Then in C1, I'd like to put another formula which also looks up "Bacon" in the array, then returns the value of the cell that is down two cells from the cell that contains "Bacon", let's say the value is "Milk". And then in D1, a formula that returns the value 3 cells below "Bacon", and so on. All the values here will be text, and not sorted in any specific order. I'll be using Excel 2010.
Please take a look at the attached sheet if it clarifies things.
Is there a way in Excel (2010) to lock data from being entered into cells based on the value in another cell? Here is an example:
Row 4 contains dates from 2015-2030 as a header starting at column C (C4 and on) that represents years of revenue. Column B contains dates as well, this date can be any year but this becomes the driver for the data input in columns C through X. Column B contains the "Delivery Date"
Data is input in Columns C and so forth. The issue becomes that let's say that the date in C4 is 2016 and this is the beginning year. Obviously there should be no inputs for 2015 (C5) and the data should start to be input for this year at 2016 (C6). Often people just begin filling in the first available year not looking at what the year actually is.
Is there a way to add a formula or some logic/protection to prevent inputs in previous rows based on the values in column B? So if the value in column B is XXXX than there can be no inputs in cells less than that value?