How To Display All The Values Of Matching Key In One Cell In Excel
Dec 7, 2013
Am using Excell for some times and understood the basic operations like VLOOKUP and other formulas, and it was really usefull. Now i have another requirement where i need to get all the values matching from another tab.
Below is the example: I will be entering all the values in Tab 2 manually. As well as i will be entering the Categories (Column A) in Tab1. I want the Values (Column B) in Tab1 to be populated.
TAB 1CATEGORY
VALUES
AA1
1
2
AA2
5
BB1
3
BB2
4
6
TAB 2
CATEGORY
VALUES
AA1
1
AA1
2
BB1
3
BB2
4
AA2
5
BB2
6
I have 2 problems in that
1) It is not dynamic, i have to change Tab 2 frequently.
2) values are listed below the categories
View 4 Replies
ADVERTISEMENT
Jun 4, 2013
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
View 1 Replies
View Related
Nov 23, 2013
I have to compare data in first sheet of two excel files and have to create a log file to display the logs of comparisons.
First workbook is placed in folder C:/Input/ with name as Input.xlsx and second workbook is placed in folder C:/Output/ with name as Output.xlsx.
I have to compare below cells between input.xlsx and output.xlsx.
Cell "B1" in input.xlsx , has to match with Cell "C4" in output.xlsxCell "B2" in input.xlsx , has to match with Cell "C5" in output.xlsx.
Cell "B3" in input.xlsx , has to match with Cell "C6" in output.xlsxCell "B4" in input.xlsx , has to match with Cell "C7" in output.xlsx.
Cell "B5" in input.xlsx , has to match with Cell "C10" in output.xlsxCell "B6" in input.xlsx , has to match with Cell "C9" in output.xlsx.
[Code] .......
After Comparing, I would like to log all the comparision in a log.csv, if cell "B1" in input file is matching "C4" in output file , say matching and color it green. If not matching, provide mismatch values from both cells and color it in red.
How we can compare 100's of excel files placed in Input and output folder and create one log file as stated above.
View 1 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Dec 16, 2008
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
View 5 Replies
View Related
Jan 27, 2014
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
View 6 Replies
View Related
Apr 4, 2014
I am using Excel 2003. I have attached a data file here. getting the values in Q3, R3 and S3.
Scenario:
Q1 has the number = 1. So I want the cell Q3 to return 2/11/2013 as that is the cell corresponding to the Item1 (value specified in P3) with the value 1(value specified in Q1) in the cell. Basically, I need the date corresponding to cell which has the value of Q1 for the value of P3.
Similarly, R2 must have the value 2/12/2013 and S3 must have the value 2/14/2013 returned.
View 10 Replies
View Related
Jun 4, 2013
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
View 9 Replies
View Related
Jul 18, 2014
Excel 2010: I'm working with a sheet where I would like to get accurate results on the make and model of cars sold in a given week. The workbook contains several worksheets each representing weekly sales numbers for different vehicles.
The Make-Models tab has the lists used to create the drop-down selections.
The Sales tab allows one to create an ad hoc report on the total number of vehicles sold, by Make and Model. Cell B2 is named 'SelectedModel' and used in the formula found in column E, Total Sold.
Problem: When I select Honda, for example in B2 of the Sales worksheet then select Accord in cell B3 of the same. The results returned in E2, E3 and E4 are 2, 3 and 4, respectively, instead of 8, 3 and 7.
2 Honda Accords were sold on Monday and 6 on Tuesday of the same week. My formula is only returning the first matched value of 2 whereas I would like it to return 2+6, 8 for week 1. Same goes for other weeks.
Select any other make and model and notice the problem follows. I believe the error is due to incorrect usage of the formula or incorrect formula altogether.
IF(ISNA(INDEX(Week1!E:E,MATCH(SelectedModel,Week1!B:B,0))),0,
INDEX(Week1!E:E,MATCH(SelectedModel,Week1!B:B,0)))
View 9 Replies
View Related
Feb 13, 2012
I am trying to have duplicates and their corresponding data appear in my pivot table. Assume I have a list of over 1000 stores. Let's say store 101 appears twice in my data file.
When I create my pivot, the 101 only appears once and the data is consolidated. Is there a way to ungroup/display duplicates?
View 2 Replies
View Related
Jan 17, 2014
I have a pivot table which has a report filter. The report filter can have anywhere from 20 to 350 values. The user will be able to select multiple values from the listing to produce the table as needed. I would like to be able to display what values were selected in the report filter so that the user can see this information once the pivot table is rendered. Is there any way to display this information either above below or along side of the table itself?
I am using Excel 2011 for Mac, but I also have access to Excel 2011 for Windows. Either way will work. I have been able to get quite a bit of what works on Windows to work with the Mac.
View 1 Replies
View Related
Nov 27, 2012
Example attached : Copy of CAB.xlsx
View 2 Replies
View Related
Jan 7, 2010
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
View 2 Replies
View Related
Mar 31, 2014
I have browsed for two days looking for material on effecting this. The technique quoted most is watch for undolist for paste & auto fill then undo the change and paste the value again with specific formatting needs. This technique can be implemented in a worksheet_change event handler. The problem that I am facing is that the user can copy and past while my VBA is running. Once it is caught inside my own application class object event handler all that undo stack is already cleared. Therefore I have nothing that tells me if the user has entered the value via a paste action. By the time the value is pasted, all that formatting would have been entered. For example, a value that is interpreted by another workbook as DATE will have my destination formatting changed to DATE as well even though it is designed to be TEXT at design time.
So far I have not been able to think of a scheme to deal with this.
My basic intention is to always ensure the destination cell formatting remains as TEXT. If something is already interpreted as DATE after the paste even if I can convert to TEXT the string will appear totally differently. I have to find a way to paste the whole thing as TEXT in order to keep the string the same. The problem is that there is no intrinsic PASTE event in VBA. Without a method to undo that paste I cannot catch this at all.
View 1 Replies
View Related
Dec 21, 2007
(refer to attached workbook)
For what I'd like to do, the attached workbook actually represents 2 or more workbooks. The 'Project-PO Report' tab is a sample of what will be several workbooks/reports that will be generated from the data in 'POTASK'.
The 'CMD_BUTTON' tab represents how I plan to use a command button " IMPORT DATA" to import the data into this workbook, then use "RUN PROJECT-PO-REPORT" to call the MACRO to achieve my objective,as stated below. (Originally,this workbook was about 8mb, so to get this under the size for attachment, I just copied the bare minimum of what I believe would be needed to assist me, and so there's no buttons or macros or dynamic name ranges, as there will be...)
Here's what I want to do: ...
View 3 Replies
View Related
Apr 8, 2013
I have a problem where I am linking data from two worksheets say: worksheet 1: A1 = 10, A2 = 20 worksheet 2: A1 = =Sheet1!A1, A2 = =Sheet1!A2
I have filled this formula through a certain number of cells on sheet 2 so that if i add more data to sheet1 it will appear in the appropriate place on sheet2. Is it possible to show the formula results in the formula bar, i.e. sheet2: A1=10, A2=20, such that i can used 'Find' or 'Autofilter' on the cell values rather than the formula?
View 7 Replies
View Related
May 28, 2008
I'd like a formula to be inserted in cell A4 that returns all products listed in row 1 that have FALSE in row 2. Is this possible? I tried a HLOOKUP and a MATCH yet it wasn't returning all occurances
View 9 Replies
View Related
Jan 7, 2009
I would like to have a dialog box "popup" if the value of two cells do NOT equal.
cell C11 has net sales values for the day, including cash, checks, and credit cards. After sub total of these values, I subtract any charges(voids) and get a total(c11). I enter a sales(c12), tax(c13), no tax(C14), misc. amounts(C15 & C16) ,reductions(c21) and put the total in Cell C22 with the formula =Sum(c12:c16)-c21). Because I do not want the formula overwritten, I protect the sheet including the amounts in cell c11 and c22. If they do "Not" match I would like a dialog box to appear so the error can be corrected.
View 5 Replies
View Related
Jan 8, 2008
Triggering a message box. one of the worksheets in my workbook is called Update Comments - this is a sheet that contains data in the following format (headers)
B7 = Week Number
C7 = W/C
D7 = Update Due
E7 = Updated By
G7 = Update Comments
I have a formula in column D (beginning D8 and copied down for the year) as follows:
=IF(AND(C8
View 9 Replies
View Related
Sep 24, 2007
is there a way that i can insert cell values in a userform
i have data which needs to be displayed on 33 lines
line 1 cell value from d10 then space cell value from d185 then space cell value from d186
this needs to be repeated
line 2 cell value from e10 then space cell value from e185 then space cell value from e186
line 3 cell value from f10 then space cell value from f185 then space cell value from f186
line 4 cell value from g10 then space cell value from g185 then space cell value from g186
this continues trough to line 33
View 7 Replies
View Related
May 30, 2014
In range B4:M4 some cells contain values and some are blank. I am trying to write a formula that will omit the blank values and just give me the nonblank values. The code below returns the FIRST nonblank value, but I can't seem to figure out how to drag it across a row to get the others. I want to ensure that the numbers stay in the same order (so no largest/smallest formulas), but the blank cell values need to be removed.
This would then need to be repeated for (B5:M5, B6:M6, ETC).
[Code] .....
View 2 Replies
View Related
Jul 30, 2009
I am trying to create a formula to display a string of text that refers to multiple cells. for example, =If(A1=0,"insert text here" &B1 "insert more text here" &B2 "insert even more text here" &B3, "insert text here" &C1 "Insert text here").
It works fine for one cell value, like ="Total: " &A1
View 8 Replies
View Related
Mar 5, 2014
I would like to know if we can display a label with values of two different cells when hovered over a cell in excel 2010. All I want is ,When hovered over a cell I want its corresponding row and column heaing to be displayed.
View 1 Replies
View Related
Jul 11, 2012
Is it possible to display a particular excel cell (for example cell A1) on Desktop permanently?
If yes then - HOW ?
View 4 Replies
View Related
Nov 19, 2009
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
View 12 Replies
View Related
Jul 31, 2013
excel help.jpg
Basically it is a training matrix.
basically I need A30, A32, A34 and A36 cells to display the characters they are currently displaying but when i copy and past any of them into a new cell on the matrix for example into cell B11 I want to be able to SUM the total of that column and display it in cell B24
So to recap, I would like A30, A32, A34 and A36 cells to hold 25, 50, 75 and 100 as there value but this can not be displayed it is just a value which i can use to calculate.
I am ok if i have to link the cells with another worksheet but i have tried doing this also i dont know if i need to use VBA.
View 4 Replies
View Related
Nov 27, 2012
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
View 2 Replies
View Related
Mar 13, 2013
I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
View 5 Replies
View Related
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
May 15, 2014
I would like to align the matching values in columns A and B but I want the values that correspond to b in c,d and e to go with the column b value.
C D and E don't necessarily have a value in there but if it does it needs to move with B
View 5 Replies
View Related