Excel Checkboxes To Automatically Check If There Is Anything In A Cell?
Aug 13, 2014
Checkbox.JPG
So I have an 2 ActiveX button and 2 ActiveX checkboxes. I have it set up so that the Split button will enable when both checkboxes are checked. The ClearAll button has a code/macro in it that will check the "Cleared All" checkbox when the Clearall button is pressed.
My problem is with the "Populated Data" checkbox. I want it to check/uncheck itself if there is anything in Range("A1") of a tab called "Data".
As soon as i mark checkbox1, i want to send the checkbox Caption to A1. Then if i choose checkbox5 and mark it, i want to send the checkbox Caption to A2, which is in this case next cell available on colA.
Is there a way to set up a "watch" on a cell so that if you type in a different number on a cell, OptionButton1_Click() gets activated? Example:
A9 = 12.0104 OptionButton2 is active.
In Cell A9 you type "25.0508". OPtionButton2 becomes inactive and OptionButton1 becomes active. I already have the buttons linked, i just do not know how to make the button get triggered if A9 changes.
I'm developing a workbook containing 121 sheets. Sheet 1 is effectively an index, and uses 120 form control checkboxes to unhide and display the selected sheets individually.
The code I'm using for each checkbox is below and is in a module.
I have placed ActiveX checkboxes on my worksheet. I would like to have some code that would uncheck them all at once, rather than some really long code unchecking each one individually (which is what I currently have). Is there code for this?
Well to start off I am using Excel 2007, I have an invoice template set up across two sheets (Invoice & Price Table), on the first page is the actual invoice that needs to be filled in. I have made an userform for being able to fill in the invoice number,what type of test was done, and also things like hours and miles (an their costs per also)
. Now I am wanting to try and get it to where I can have the form look at the type of test cell and from there select the price located on the second sheet that is appropriate to that type, the thing is, there are two possible prices that it can be depending on if the company wanted the results "rush". I was suggested that I could use a check box on the invoice to indicate in the spreadsheet that it is a rush, and somehow link that in with a vlookup to be able to get what I wanted, but I'm not sure exactly how I would go about doing that.
- 12 unique values in column 6 which represent states within the country. - 7 unique values in column 25 which represent the types of services. - 5 unique values in column 27 which represent the days for doing the services.
I also have a user form that contains CheckBoxes equivalent to all above unique values, and I want the CheckBoxes to do the duty of a filter, whereby after selecting the needed CheckBoxes and clicking on a seperate botton "creating report", I want to show on the spread sheet only the rows of the values being checked and all other rows which don't contain the needed values should be either hidden or deleted.
How I can merge multiple word documents based on checkboxes selected on Excel.
Specifically, I have some 75 checkboxes found on Column F with linked cells on Column G (for example, checkbox1 place on Cell F1 linked to Cell G1). Each of the checkboxes have a corresponding Word document (containing text and tables about 1 to 4 pages in length). Based on what checkboxes are selected, I'd like to have those corresponding Word documents merge together and create an entirely new Word file (for sake of order, the datapoints from each selected Word document should be placed at the beginning of a new page in the new file).
The user will eventually name and save the new file on their own.
I'm not familiar with the required code as well as where it should be placed (whether on the excel file that contains the checkboxes, on the individual word documents that are eligible to be merged, or parsed out on all files).
I have a big database of customers, each one has a unique reference number. They are spread accross a bunch of different tabs (21 in total to be exact)
One issue I have had is staff entering a customer whos already in the database, causing a duplicate entry. I dont need excel to tell us where the entry is, just to give some kind of indicator it already exists. I thought I may be able to use data validation/conditionality to turn the cell fill Red when it already exists in the data base.
The reason I think that method would be best, is that the sheets that data is entered on are seperate that the master sheet then pulls the data through from. Its the master sheet that would need to indicate a duplicate has been entered, as thats the only sheet where the entire database can be viewed.
Using Excel 2007, I have a workbook with 7 sheets. The first one is a Navigation Page where I have checkboxes (form controls, not active X) with the names of the other 6 sheets. When the box(es) are checked, the sheet(s) become visible. I have accomplished this by assigning macros I recorded.
I need to now add the opposite: When the box(es) are unchecked, the sheets become hidden. From googling and looking for other threads/forums here, I gather that I need to add code/ VBA, but I know nothing about these at all.
I am using Excel 2013. I have an autofilter turned on for the columns in the spreadsheet. When I click on the filter button at the top of a column, the filter values do not have any check boxes next to them so I can't check any values. how to fix it so that it has checkboxes? I've attached a screen shot.
I'm new to excel and have had a hang up with the MkDir feature. I would like to check if a folder exists based on a certain cell value, and then create the directory if it does not exist. This is what I have so far.
Dim newFile As String Dim Path As String newFile = Range("D5").Value & " " & "op" & Range("B200").Value & " " & Format$(Date, "yyyy-mm-dd") Path = Range("A210").Value
Basically I have a big table containing several columns for the different quarters. (Each quarter has several columns which are not all next to each other)
I would like to use 4 checkboxes which the user can select the show or hide the columns for that quarter. E.g. if Q1 and Q3 are checked only those are visible)
(if quarter 1 clicked than all columns are visible if unclicked hidden).
The code I have written workes well for the first checkbox (Q1), but for the other quarters (Q2, Q3 and Q4) the columns get hidden when checked (which should be the other way round) and don't get unhidden when unchecked.
Sub CheckboxQone() If Range("$A$1").Value = True Then Call showQ1 Else: Range("$A$1").Value = False Call hideQ1
It might be very simple, but all I need is if I have data on A1, and i have 3 check boxes labeled: NEW, EXISTING, and ARCHIVED. I want it to automatically check the corresponding boxes. So if "NEW" is typed under A1, it'll check "NEW" box. "EXISTING" will check "EXISTING" check box and so on.
I have multiple worksheets of computer equipment, each worksheet is a group/department. Column H is the serial number column and the entries have to be unique. I have managed to create the code below which does find duplicates across worksheets.
When error message pops up about which sheet the duplicate already exists on, the duplicate entry is deleted and the cell is blank but the error checks again and reports the blank existing on another worksheet and then it is stuck in a loop. How can I ignore the blank or null.
Private Sub Worksheet_Change(ByVal Target As Range) Dim I As Integer I = Sheets.Count If Not Intersect(Target, Range("H2:H200")) Is Nothing Then Do Until I = 0 If Application.IsError(Application.Match(Target, Sheets(I).Range("H2:H200"), 0)) Then Else MsgBox "That entry already exists in the " + Sheets(I).Name + " sheet" Target.ClearContents End If I = I - 1 Loop End If End Sub
Is there anyway to read a specific cell from many excel files automatically and add them to a new workbook?
I tried to link that specific cell to a new workbook manually but now I have a problem: If I change the name of any workbook that is linked to the new workbook, Excel can't update the new file name
If input is entered into column C (range C2:C100), then row cells for columns D, E ,F, H or I must NOT be blank upon save. Could be that one or more of these row cells are left blank by mistake.
An error msg pops up upon attempting to save, stops the save and colors each cell yellow that needs info entered into.
I use the code below to check and see if a sheet exists or not when a workbook is opened. If it does not, continue. If it does I need to run a different sub on it. Twist, I need to check for a hidden sheet. How would I chg the code to do this?
Private Sub Workbook_Open() 'Also need to check the code in the userform. Has On.Time command. 'SplashForm.Show Sub Sheet_Test_1() Dim sh As Worksheet On Error Resume Next Set sh = ActiveWorkbook.Sheets(" total") If Err.Number <> 0 Then MsgBox "The sheet doesn't exist" Err.Clear On Error Goto 0 Else MsgBox "The sheet exist" End If End Sub
I am using Excel 2013. I have a spreadsheet that has a lot of very tall cells. When I use the scrollbar to scroll to certain parts of the spreadsheet it will automatically scroll up or down to the top of a cell. So if I want to view the middle of two tall cells that take up the whole screen it will automatically scroll up to the top of the highest cell that I'm currently viewing.
I just want to be able to scroll to where I want to scroll without Excel moving me up or down. I've tried to find answers on message boards but no luck.
I have an issue with two columns in Excel 2007. The first one has a bunch of numbers that run from top to bottom and I would like to move all of the negative numbers from the first column to the second one. I understand that this can be done with the IF command
I have 2 tabs in a 2013 workbook. Inventory Receipts and lookups. One of the Data verification lookups I have is a drop down list in each cell in Column B (eg: Cat, Dog, Mouse) In the lookups tab I have another cell range containing the sounds (eg: Meow, Bark, Squeak).
What I am trying to acheive is, if B2 contains Cat, then return Meow in B3, if B2 contains Dog then return bark in b3 and if B2 contains Mouse return squeak in B3. Ideally I would like the formula to return the text from my lookup sheet (eg: 'Lookups'!C2,'Lookups'!C3,'Lookups'!C4). So depending on which option they choose from my animal drop down list .. the correct noise would automatically fill in.
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code: Sub Tester()
Dim WB As Workbook Dim WS As Worksheets Dim modCounter As Long Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm") Set WS = WB.Sheets(BM18)
I have a peice of code that i know is inefficient and it is in danger of becoming too large. I have a spreadsheet that has circles aligned to each cell. There are around 100 in total. The code changes the colour of the shape based on the cell value in which it sits. However, the code needs changing and also it does not automatically update the colour shape even though the cell value changes. I have to manually select a cell and then the formula bar and then press return for it to update.
I am using excel 2010.
This is the code i am using for each shape.
Code: If Range("n12").Value = text Then ActiveSheet.Shapes("Oval 250").Fill.ForeColor.RGB = RGB(255, 255, 255) End If
I have created a spreadsheet that displays new dates in column D based on provided dates in Column B and recurrence intervals selected in column C. The dates in column D are when a training deadline occurs. I have been trying to get a macros written so that when a cell in column d is updated, an outlook appointment message is sent to the person doing the updating. The idea here is that anyone can use this without future coding (so their address would be placed in cell say A1)
So far all i have gotten is excel to send an email to me with the excel spreadsheet as an attachment, not really what I want. Again, I dont want somethign specific to my computer settings, I want to be able to send the spreadsheet out with simple instructions for the user to change their email in cell A1 and then every time a cell changes in column D, it automatically generate an appointment reminder for the new date.
