Can VBA be used to extract a table from a website and output it on an excel sheet?
Basically we have to log in to a website and type data to our spreadsheet which is a bit tedious from the table on the website.
I'm guessing this can be done in some way but us having to enter username/password on website first to get to page we want will probably cause an issue would it?
[URL]
My Excel Spreadsheet has columns named "Hospital Name | Overview | Address | Phone | Fax | Contact Person 1 | Contact Person 1 Title | Contact Person 2 | Contact Person 2 Title | Contact Person 3 | Contact Person 3 Title"
There is the list of hospitals starting from "Abbott Northwestern Hospital". I have two things in my mind to extract the information. If you click on the first hospital name "Abbott Northwestern Hospital". Below is an example text which I would like to transfer it automatically in columns given above;
This text should go in column named "Overview":
Abbott Northwestern Hospital bring twins into the Twin Cities -- along with triplets, quadruplets............
This text should go in column named "Address": 800 E. 28th St.Minneapolis, MN 55407
This text should go in column named "Phone": 612-863-4000
This text should go in column named "Fax": 612-863-5667
This text should go in column named "Contact Person 1": Jeffrey D. (Jeff) Peterson
This text should go in column named "Contact Person 1 Title": President
This text should go in column named "Contact Person 2": Daryl Schroeder
This text should go in column named "Contact Person 2 Title": VP Operations
This text should go in column named "Contact Person 3": Sandy Schmitt
This text should go in column named "Contact Person 3 Title": VP Strategic Development, Allina Hospitals and Clinics
In the past, elements were more or less fixed and was able to use my very well known method QueryTables under Workbooks.open
This website below has a "div", called "div.sidemeta" wihick contains the information I want to grab. [URL]
I have tried a different alternative:
Sub Test()
Dim IE As Object
Set IE = CreateObject("internetexplorer.application")
IE.Navigate "http://www.webiste.com"
[Code]....
The data I get under "IEdoc.body.innerhtml" does not show that particular DIV. I have tried using getElementById,getNamedItem and getElementByName without any luck.
Is it possible to extract data from a website into an excell workbook using data from the workbook?
I have rough workbook that i gather data from 3 different websites to calculate a rough market value for DVDs that I buy and sell. I am good with excel but have no idea about importing data into it.
Currently I copy and paste from the sites on an as needed basis but it is a slow slow task when I have several dozen or more to do per hour.
From inside Excel, I wish to surf to a website and retrieve the bottom entry in a column The column updates dynamically with a new number added to the bottom on a daily basis.
Here is the website [URL].......
The column I am interested in is the second column from the left under the History section. The column contains close prices for the currency symbol EUR/$.
I have a tedious task of copy/paste from our website. have a look at below sample data. I have around 1500 rows of data like this.
Sheet1
A
B
[Code]....
Column A has input data which i need to copy and paste in a web form. Column B will have results scrapped form webpage[ URL]. This webpage will need login details
If a code can be written which take value form column A of spreadsheet and paste in webpage like shown in above image and hit search button. Next webpage will be loaded with number of results like shown in below. Take the number of results and paste in column B of spreadsheet.
I am looking for VBA code to extract data from each tab into master tab based on data.
I have 3 tabs (inputs)
Tab1 (Dept A-NAME) (RANGE B4:I7)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
A
2/25/2014
Customer 1
10
1
3
ABC
[Code] .....
Tab 2 (Dept B-NAME) (RANGE B4:I11)
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
1
B
2/25/2014
Customer 3
10
1
3
RTY
[Code] .......
Tab 3 (Dept C-NAME) (RANGE B4:I7)
Is it possible to run vba code to get below result in new tab
SL NO
ID
Date
Customer
Start Time
End Time
Trucks
Supervisor
Result
1
A
2/25/2014
Customer 1
10
1
3
ABC
Dept A
[Code] ......
Condition here is date 2/25/2014, is possible when running code message box pops up to ask date, when we give conditional date it extracts those dates.
Excel -2007 & Windows 7
I'm trying to extract data from one excel to another. I'm able to extract data without a problem copying cell to cell or a count, but I'm not able to get a return by calculating the sum. There must be a way?
.Range("A1").Value = Sourcesheet.Worksheets(1).Range("C10").Value
.Range("A2").Value = Sourcesheet.Worksheets(1).Range("D1:D10").Count
.Range("A3").Value = Sourcesheet.Worksheets(1).Range("D1:D10").Sum
First two lines work like a charm, but not sure how to tackle the third.
VLookup function, formula that will allow a user pull up data either by name or an ID number. Heres a scenario:
Cell (C5) requires user to input "name" of employee being search. Cell (H5) if you do not know the correct spelling then use their ID number. The array is called "agentlist" which contains Name, ID #, hire date, SSI, title, and personal address.
Here's the formulas that I came with but it returning with a "n/a" response.
(B12) =IF(C5"",AND(H5=""),VLOOKUP(C5,agentlist,2,0),"unknown")
(E12) =IF(C5"",AND(H5="")*VLOOKUP(C5,agentlist,7,0),"unknown")
(G12) =IF(C5"",AND(H5="")*VLOOKUP(C5,agentlist,4,0),"unknown")
(I12) =IF(C5"",AND(H5="")*VLOOKUP(C5,agentlist,2,0),"unknown")
(L12) =IF(C5"",AND(H5="")*VLOOKUP(C5,agentlist,9,0),"unknown")
The cells within paranthesis are the locations were the data will be displayed. Am wondering if I would need two different arrays, one to locate by name and the other by their ID number? Hope this problem is clear.
a1bc1c4e1f1g1h1i1j1k1l1m1n1a2a3search by:a4a5name:Victor SuarezID:a6a7a8a9a10Employee Informationa11a12#N/A#N/A#N/A#N/A#N/Aa13nameTitleHire dateSSIAddressa14a15a16a17a18agentlistID #named
[Code] ......
I'm tasked with looking up part numbers in Epicor's ERP database and entering the labor cost into excel. Is there any way to write a macro or VB program that lokks at the part number in excel, goes into epicor, pulls finds the part number and cut and pastes the cost data.
I have about 30,000 of these to look up.
A B C D E F
Cust Cust ID $ Items File SentFile Confirmed
Bank a1a $50,000.00 1008:00 PM
Bank b1b $51,000.00 2009:00 PM
Bank c1c $50,000.00 30010:00 PM
Bank a1a $53,000.00 40011:00 PM
Bank e1e $54,000.00 50012:00 AM
Bank f1f $55,000.00 6001:00 AM
I use a report daily at work that is filled in during the day; I'm wanting to minimize some of the work to be more efficient. VBA to search a particular folder in outlook (ex: inbox - cust info ) and search within those emails to verify 3 items match (Cust ID / $ / items) before extracting data and putting it into column F for that item. For instance, bank a and bank c have $ values that match, but the other criteria dont - Cust ID and items. Also is there a way to attach a copy of that email to the spreadsheet, say in column G, it doesnt have to populate in the spreadsheet, but maybe the attachment will open even 6 months down the road? I am worried that a link will eventually get lost if an email is erased.
I'm trying to put an excel sheet on to a website. The website allows HTML snippets and I know how to save the excel sheet as a webpage but I don't know how to transfer the webpage I've created on to the website. It asks me to post the snippet but I don't know what it wants? What is the snippet?
View 4 Replies View RelatedI have an excel sheet that has a lot of APN (parcel numbers) on it. I would like to run that through the assessors page [URL] to get the address and owners name. It seems like a very simple thing to do, but... How would I make it run each parcel through the assessors page to get the name and address information. Is there a tool I can install into Excel to make this easier?
View 7 Replies View RelatedExtracting data from an excel file, the data needed in lies in one column.
in this line
<GPSPosition pntRef="GPS_Auto_0080" wgsLatitude="33.334329659885" wgsLongitude="44.405736558207" wgsHeight="27.615921">
i need to get a table with three columns shows
wgsLatitude, wgs Longitude , wgsHeight
33.334329659885 ,44.405736558207 , 27.615921
etc
and get rid of all other information
this is an example of the how the file look like
---------Column N -------------------
</Feature>
</GPSPosition>
</GPSSetup>
<GPSSetup id="GPSSetupID_18" GPSReceiverDetailsID="GPS_1" antennaHeight="1.660000" stationName="GPS_Auto_0080">
<GPSPosition pntRef="GPS_Auto_0080" wgsLatitude="33.334329659885" wgsLongitude="44.405736558207" wgsHeight="27.615921">
[code].....
seems from above that there are too many data not needed the only thing need to be exracting is one lies of GPSPosition Line.
Is there any way in which I could get Excel to login automatically to this website [URL] .... for obvious reasons I cannot divulge the username or password.
I have managed to get excel to open the site.
I would like to create a macro so that it will pull all the data from the worksheet "Data" and put it onto worksheet "Extracted Data". However I only require the rows which have Booking Office No SU17.
View 3 Replies View RelatedMacro that extract information i need from column A into column B. My file contains comments regarding a sale made by a manager. And, the only information that pertains to me is the bags it will be using.
Below is a example of a comment (ROW 28 of the file):
PO 186
TRADER
SHIPPING WITH BROWN
240 X 20 # PANDA $ 9.90 EACH $ 49.50 CWT.
850 X 40 # PANDA $ 19.05 EACH $ 47.63 CWT.
US # 1 MAX. 4% BROKENS
The only information i need is 240 X 20 # PANDA and 850 X 40 # PANDA.
In the file, the Bags Tab, lists the names of all of the bags we current have in our inventory. I was thinking that a macro can run through column A of the comment tab and if it finds a match in the bag tab it would list it out in column B of the comments tab.
Here is my file. [URL]....
[URL]
You can download the excel from the above link.
This excel includes some text data, in each cell there is an email address along with additional text. I only want to get the email addresses from the entire data.
i want to compare two excel sheets and extract common data in either sheet. For eg: If sheet 1 and sheet 2 contains some common data, i need to compare or lookup or whatever i do but i need to pull out that common data in sheet 2.
View 3 Replies View RelatedWhat I am trying to do is extract all the data from a excel database based on criteria. When i specify the site and month I need to pull all the corresponding data and write it to a worksheet. Below is an example. I am not allowed to show all the data it is confidential.
Site Date Operator Month
Chicago 12/3/11 Daniel December
San Jose 4/8/12 Mike April
New York 4/8/12 John April
I'm trying to download an Excel file from the internet and then extract data out of it. The problem is that I don't get any errors, yet the file downloaded is only 1kb in size. The extraction bit works, but the file is empty. The actual file is size 350KB.
Code:
Sub ExtractDataTest()
Dim FileNum As Long
Dim FileData() As Byte
Dim MyFile As String
Dim WHTTP As Object
On Error Resume Next
[Code] ....
I am looking to import data in text file to Excel sheet. Here is the main catch - All the data are not of fixed length and are in multiple lines as in the example below.
Text File:
ID001 Dr Dang 01012011 Male
USA Married 123
Below is how I expected the data extraction in Excel:
ColumnA ColumnB
CardID ID001
Name Dr Dang
DOB 01012011
Sex Male
Country USA
Status Married
Pin 123
I am trying cut and paste a list into Excel, and have Excel separate the different fields for me. There are 12 lines per each entry on the list. I use Firefox as my browser, and when I cut and paste using Firefox into Excel, this is how it looks:
James H. Patel, MD
(space)
Pediatrician
(space)[code]....
I'm hoping for the final product to look like this:
Last Name----First Name----whether MD or DO----Street Address----City, State, Zip code----Zipcode(by itself)
Title says it all. By safely I mean the following:
I have hidden worksheets that I want to remain hidden
I want my formulas to remain hidden
I only want a few amount of cells to be edit-able
The idea is to upload an Excel workbook onto my website that other users can have access to, interact with, but not change.
I would like to search for a keyword or a phrase in a website using excel.
Generally we copy the keyword or a phrase and paste it in google and go for search. but i wanted to do this using excel as i have to search same pharse in multiple websites.
I have been trying for some time to be able to download a file from what I believe to be a FTP site. There are three user input fields which I have been able to identify there names. After these fields are complete there is a button to push which I have also identified it's name.
Once the process of pushing this button is done, an unspecified amount of time must occur for data to be gathered and the option of Open, Save, or Canel appear in a Download window. I would then need to Save and Overwrite an existing file.
No Login or Password is required.
I have been able to automate the open of I.E. and input to the three select fields as well as the necessary button push.
However, I am unable to identify how to automatically save the file into a specified location, with overwrite privileges enabled. Below is my progress
How to copy the website address for cell excel?
Code:
Sub CopyAdressToCell()Dim n As String
Set n = ActiveSheet.Pictures.Insert("http://www.google.com.br/images/srpr/logo4w.png")
With Range("B2")
t = .Top
l = .Left
End With
With n
.Top = t
.Left = l
End With
Range("A2").Value = n '
I have a big collection of spreadsheets that are all laid out in the same fashion: from A2 down are the names of different individuals (one name per row). Column titles (from B1 right) are the names of unique qualifications that these individuals possess. In the cell where a row and column intersects is the date at which this qualification was awarded. If this doesn’t make total sense, I’ve attached a very basic version of this to the post (Sheet 1) – although the spreadsheets I’m working with have hundreds of individuals and scores of qualifications, rather than just a couple!
This data needs exporting/rearranging into a format that’s recognisable by another piece of software that we use. In this format, the data is split into three columns: the person’s name, a possessed qualification and the date it was awarded. This means that a single individual’s name may have multiple rows, since a different qualification will be present in each row for that person. An example of this layout is shown on Sheet 2 of the attachment.
I have two different worksheet that if data is changed then the user needs to go to the company's website to update information there as well.
Can a macro look at a range of cells and if a change is made then a message box would pop up and if the user said yes then they would be directed to the company's website.
I am looking to take information from a document emailed to me in word and then populate the specific ranges in my excel spreadsheet for invoices. What is the best method for doing this and how can i control where it comes from the position in the document and the range is going to.
View 1 Replies View Related