I would like to use vba to copy a value in F31 to B5 in sheets("2") and express it as a percentage.
For example, the value in F31, 102 is copied to B5 as 102. Like to have it express as 102%.
Sheets("S1").Select
Range("F31").Select
Selection.Copy
Windows("Report.xls").Activate
Sheets("2").Select
Range("B5").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I need to divide Cell "A" with Cell "B" and put have the final sum in Cell C. e.g. Cell A===10 Cell B=2 Therefore, I want Cell C to say 5
View 6 Replies View Relatedwith a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View Relatedauto incrementing my invoices.
The way I do my invoicing is like this. I have 1 Invoice in a worksheet (eg April 1) When I make my invoice for the next day I right click on the April 1 tab at the bottom. Right click/Move copy/move to end &check the create a copy box. It changes to april1(2)I then right click and change the date to the next invoice date. This might seem goofy, but it works for me. I have my Invoice number at the top of the page in cell e2. Is there a formula to automatically increase the invoice number by 1 every time I copy it?
I'm trying to make a shift schedule template, and it's all done except that i cant sum the hours the way I think i should be able to.
I've attached the file for reference.
I've added in some hours for myself as an example. I have 47.5 hours in the week. I've got 3 Rows, In Out and Hours. I've formatted the In and Out the way i want them, but I would like the Hours row formatted as a decimal, so that 7 hours 30 minutes would show up as 7.5.
I'm also having trouble with the totals column at the end. Although D8:J8 total 47.5 hours, it's adding them as 23:30.
=SUM(B10:G10)....answer is 245 minutes
How do I express this in hrs and minutes, 4hrs 5 mins.
Then I need to * this by an hourly rate to get a salary figure.
Could anyone guide me how to express symbols & signs in VBA , LIKE ....
View 6 Replies View RelatedI have data that i download and I want to label A1 with last fridays date, i have tried =today()-3 but if i start my week on tuesday it will reflect sat date.
any vb code to express the date last friday no matter what day i download the data?
I am trying to use a macro to email a recipient. I only want the active sheet in a workbook to be sent. I am using outlook express.
View 10 Replies View RelatedI am trying to figure out why my number will not format correctly... I have a number thats value is pulled in via external data that gets updated everyday.
Everything works fine there, but I needed the format of that number that was pulled in to have parenthesis around it...
I know that one can add the parenthesis to the number by using the ="("&(Number)&")" function...
What the problem is is that when I add the parenthesis to the number it will not allow me to view it as a percentage; it will leave it as a full general number (Ex. (0.0006), instead of (0.06%)
Is there a way to get the percentage number format back?
Is there a way to add a percentage to a number, I know the Method of Multiply by 1.25 for 25% The problem is there another way to formulate without the "1."
Sheet1 LMN
32640%15.28?
Is there any way to make a cell display both a raw number and a parenthetical representing a percentage based on a formula? I know this may sound strange.
Examples:
9 (25%)
12 (39%)
I could get it done via merging or =_&_ style entries, I know, but is there any other way?
I have a spreadsheet with 6 sheets. There are 3 sheets that have information regarding the soil, geology and drift deposits of an area. The other 3 sheets relate to these sheets to display the information for each area. The way that the spreadhseet is set out pretty much explains what i am trying to archive. Basically I want each sheet to say whether or not the rock, soil or drift type is present for each area. And if it is present to calculate the percentage of total area. I have created a pivot table for each of the info spreadsheets - but need it to look like the "table" sheets, because it needs to be added to a report. Any questions and i'll try and answer them , but it's quite difficult to explain in words what i am trying to achive.
View 4 Replies View Relatedexample 1:
This years sales are $3700, a decrease of 11.6%. What would last years
sales be?
example 2:
This years sales are $4500, an increase of 151%. What would last years
sales be?
I am working on a spreadsheet which has lots of data in it. I have a Column i.e. Checked out and on each cell entered an X Mark indicating that a device has been checked out.
Since this Checked Out Column goes all the way down to > 1000 cells. Is there a way for us to make a formula and calculate percentage based on the number of X's that are entered and tell as that out of 1000 cells, the X's are 65% and so the blank cells would have to be checked to complete the list?
I am trying to create a custom number format.
Here is what I have come up with: 0.00%;[Red]-0.00%
The problem is, it has no "," it would display as 23555555.6% or -2355555.6%
I need it to display as: 23,555,555.6% or -23,555,555.6%
How would this be written?
Additionally, I have occasion to "abbreviate" in the following format:
23.55MM% or 1.5M% or -23.55MM% or -1.5M%
For currency, I have it written in this manner:
Currency: [>=1000000] $#,##0.0,," MM";[>0] $#,##0.0," M";[Red]($#,###," M")
I just freeze when trying to convert to percentage.
"in Excel" - my formula for cell C11 is: "What percentage of the time (occurrences) was the value in cell B11 greater than the values in A1 thru A10?"
As in...:
100
99
98
97
96
95
94
93
92
91
90...95.....40%
89...16.......0%
88...123...100%
87...90......20%
So no data in first 10 rows of Col B. (Or Col C, of course.) Then for the value that appears in B11, how many times (out of 10, in this example for sake of ease) was that value greater than the entries in the first ten entries in Col A:
95 (cell B11) was greater than A10, A9, A8 and A7 (91, 92, 93 and 94). So 4 times out of 10, B11 was greater; 40% is the answer the formula would yield.
16 was never greater than any entries in A2 thru A11, so 0%.
And 123 was greater than all the entries in A3 thru A12, so 100%. Etc, copied down the sheet...
Spreedsheet on on sales and taxes
Need formula for cells.
3 different cells involved... B1 will have $ amounts, B10 tax code, B25 will have total of tax applied due to code.
Exp; cell B10 will contain the tax code... if you enter..... "1" in the cell the calculation will be 7% in cell B25, enter "2" in cell B10 and the calculation will be 6% in cell B25 , and if you enter "3" in cell B10 the calculation will be 13% in cell B25.
I know for some of you this will be pretty simple but im having trouble figuring it out. Attached is a shortened version of what i am trying to do. I want the Percent Attendance column to represent the cumulative percentage(hope I used the correct phrase). So for Person 1, it should currently say 100%, person 2 it should say 66.67% and so on. There are 5 days that i want to get the percentage, but because we haven't gotten to 2 of them yet, using a regular sum formula for the entire five days gives me the wrong values.
View 2 Replies View RelatedOn the attached sheet in column X, I am trying to input the Allocation percentage dependent on a number of variables:
Type (Bar, Blank, Coil, Sheet, Special)
Sub Fam Code (2A02, BC02-05, BC99, BZ99)
Sup Category (Arcelor, Independent, Tata/ Corus)
The allocation percentage is based on the below; anything outside of this should result in "Other".
Sheet (BC02/03/04) A=40%, T=40% & I=20%
Coil (BC02 & BC03) A=40%, T=40% & I=20%
Coil (BC04) A=30%, T=50% & I=20%
Example 1:
Type - Sheet & Coil
Sup Category - Independent
Result 20%
Example 2:
Type - Coil
Sup Category - Tata/ Corus
Sub Fam Code - BC04
Result 50%
Example 3:
Type - Coil
Sup Category - Arcelor
Sub Fam Code - BC04
Result 30%
I have data one sheet which is
Date Ref No Type %complete
Monday 1 Erect 75
Monday 2 Erect 50
Tuesday 1 Erect 95
Wednesday 1 Erect 100
On the next tab I am consolidating all the reference numbers and want to capture the latest % complete
I have been trying =Max(if ref no=1 and type = Erect, % complete),1
But when I try it for reference number 2, it just says 100% aswell, when that should be 50%.
I am trying to create a formula to calculate the total number of calls that I need to receive to hit the target % if the current % is less than the target %. I have tried various formulae, but not having much luck. Also, it shouldn't show me any negative figures.
A = Departments
B = Calls Dropped
C = Calls Received
D = Current % (C/F)
E = Target %
F = Total (B + C)
G = Required (When I enter B, C and E, the rest needs to calculated automatically. G should tell me the amount of calls I need to receive in order to achieve the target specified in E)
Departments
Calls DroppedCalls ReceivedCurrent %Target %TotalCalls Required to hit TargetDept 1
21083.33%95.00%12 Dept 2
067100.00%90.00%67 Total
27791.67%95.00%79
I have a form in work which acts as a tick sheet for tasks complete on a construction site. When a task is complete I copy & paste from a key of dates i.e. week ending 11.05.15, this allows me to see what week a task was complete.
Generally I only marked off tasks which were 100% complete but my manager wants me to enter the % of the task complete also, i.e. 80% in the box.
So my question is how can I have the formula assume that any box with a date & shading is 100% and any cell with a number i.e. 80 is only 80% complete. I need it to monitor around 150 cells and give me the overall % complete based on what i have discussed.
I have a dataset in Excel 2007 where I need to determine the number of census tracts (as rows) it takes for each column of data values (populations of different ethnic groups) to reach a cumulative percentage of 50% of their City group total. This is a measure of concentration that will vary from group to group.
I can do this manually by sorting each column from largest population percentage to smallest population percentage, then shift-click selecting the first row, scrolling down until I see the sum of percentages shown in the bottom right corner first reaches 50.000% or more.
Is there a cell formula I can use to determine the number of rows it takes to meet the criteria? I have to do this for 250 columns.
Is there a cell formula I can use to determine the number of rows it takes for a column of data values to reach a specific amount, that is first reach a cumulative percentage of 50.000% of the column total? It must be based on the data values from largest to smallest but I don't want to have to manually sort each column I have.
I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
calculating the percentage of a percentage and writing the formula for excel.
There are 295 people in a room, of the 295, 75 or 25% are mothers. (I know how to calculate 25% - 75/295 = 25.42) of the 75 mothers 35 have 3 children, 32 have 2 children and 10 have 1 child.
35 is what percent of 25%
32 is what percent of 25%
10 is what percent of 25%
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies View Related Just finished amending a piece of code to enable me to search for an agents name in a list of files. This is then copied to a new worksheet (named by the name entered in the search). What I need is to cut(or delete) the row from the original sheet (sheet 1 in this case) thus leaving me the remaining list of files.
Below is how the code is setup at the moment....(just copies the row)
I have copied a colorindex UDF from here and went to VBE, inserted a new module in my Personal project, pasted the UDF and expected to be able to use it in any excel file. It's not working though. I have used this particular UDF before, but on a prevous computer that is not around for me to look at.
My goal is to use =IF(colorindex(J2)=colorindex($K$1),J2,"").