I have attached an excel spreadsheet
how to set a macro to extract the following datas from it.
Game Title
Description
URL
Picture can be set at 1 side to the right of the URL
I have a very large spreadsheet that was exported from an ecommerce site with close to 1000 products. I have one column that I need to extract some text from. This column holds all of the html from the product description and is huge. I only need to extract the actual description of the product, but am having a very hard time figuring out how to do it. I've tried using the mid, left, and right function; but not all of the html is the same so it's not really working the way I need it to.
I have multiple tags throughout the html that I can use with the mid function, but there is more than one occurrence of them. So, how can I tell it to start at the 4th occurrence? I've spent countless hours searching, but I'm a complete novice when it comes to excel and I don't even know what to search for. I end up looking through sites that explain how to pull the Y out of XYZ, which is what I need, just on a much larger (and more complicated) scale.
It was suggested that I set up a macro that will find the 4th occurrence of the word, and then uses the mid function to pull the data out, but when I try to find the word, it says it doesn't exist even though I can see it right in front of me.
[URL]
My Excel Spreadsheet has columns named "Hospital Name | Overview | Address | Phone | Fax | Contact Person 1 | Contact Person 1 Title | Contact Person 2 | Contact Person 2 Title | Contact Person 3 | Contact Person 3 Title"
There is the list of hospitals starting from "Abbott Northwestern Hospital". I have two things in my mind to extract the information. If you click on the first hospital name "Abbott Northwestern Hospital". Below is an example text which I would like to transfer it automatically in columns given above;
This text should go in column named "Overview":
Abbott Northwestern Hospital bring twins into the Twin Cities -- along with triplets, quadruplets............
This text should go in column named "Address": 800 E. 28th St.Minneapolis, MN 55407
This text should go in column named "Phone": 612-863-4000
This text should go in column named "Fax": 612-863-5667
This text should go in column named "Contact Person 1": Jeffrey D. (Jeff) Peterson
This text should go in column named "Contact Person 1 Title": President
This text should go in column named "Contact Person 2": Daryl Schroeder
This text should go in column named "Contact Person 2 Title": VP Operations
This text should go in column named "Contact Person 3": Sandy Schmitt
This text should go in column named "Contact Person 3 Title": VP Strategic Development, Allina Hospitals and Clinics
I am trying to write some code that will extract several pieces of data from MSN Money and print into a spreadsheet.
So could outline the code (or the general idea) that would be needed to extract one data point from the internet (an example using MSN money would be great). I haven't been able to find a simple example that highlights how this works in VBA without the extraneous confusion.
To be clear, I don't want to use macros or the standard excel query tools as these won't, I believe, scale well and serve my purpose as I build up into extracting much more data.
(For example, I want to know how to extract 2011 revenue from this page: [URL] ........)
I have a folder with multiples excel sheets
Destination : C: Project CustomerExcel
I would like to extract and compile the information contained in these cells:
a5,c5,a6,c6,c7,a14,g14,e16,g16,e18,i18,a20,g20,h22,j22,h24,l24 all the sheets.
New sheet would contain the information of each sheet eg. Column A2= file name
And Row B2 to R2 or whatever will be the corresponding cells mentioned above for each cell. The code I have only brings back the file name but only a5 from the range but not the rest.
VB:
Sub MergeAllWorkbooks()
Dim SummarySheet As Worksheet
Dim FolderPath As String
Dim NRow As Long
Dim FileName As String
Dim WorkBk As Workbook
Dim SourceRange As Range
[Code] .....
I have to use data tables to calculate Net Present Value (NPV) by altering specific variables.
My NPV is the result of a series of calculations to ultimately arrive at a cash flow figure and then apply the WACC (average cost of capital)
I understand how to use data tables But for the life of me i cant figure out how im going to tell excel that im changing for example wage costs and not fixed assets when trying to asses the NPV sensitivity
My sheet and calculations are all set up
I've done it manually by altering the figures on the Inputs and Data Sheet.
My NPV calculation is on the Workings and calculations sheet.
The data tables i have done manually are on the Inputs and Data sheet.
I just want to remove all the parts after /p1/ and /p2/ and make each cell contains only the top level data. How do I do that?
View 2 Replies View RelatedI use MS Excel 2007 and I was wondering if it was possible to enter data for certain things once, and have that data copied automatically every time I type the text. For example, if I type Blue Car in a cell and type 4 in the next cell, is there a way I can program Excel to enter that data every time I type Blue Car?
View 14 Replies View RelatedUsually I use data connections (using http://www.....) to pull several worksheets(tables) from another spreadsheet. Currently I had a set of worksheets that created in an unstructured manner, the tables are not entered from Row 1 (see attached mockup). Besides using VBA programming, if there a simple way to connect and extract these tables to a fresh spreadsheet for computation. So the users can continue to perform data-entry and this consolidated spreadsheet will refresh whenever open for reporting and visualisation.
View 4 Replies View RelatedI am trying to monitor my turnover and taxes but struggling slightly to get things to work. I have attached a spreadsheet that has comments inserted to show what it should be doing, I just can't get that to happen at the moment.
OzGrid help.xlsx
I have a few excel calendars.
I was wondering can I take a calendar and then put hyperlinks or vba to make a sheet if clicked on.
So If I click on an icon on a date, it will copy a certain template sheet, then link it to that date and that icon.
See an excel calendar, I have a few others to play with aw well.
But this one gets updated on the same the page and not sure how the links/icon would follow the dates. I was hoping for maybe 3-4 different icons on a date.
I used to use Excel many many years ago for all my basic business databases and pivot table reports (so was at a basic competency level) and want to use it again but it has been quite a while and I can't remember how to do the following.....
I want to build a database of sales and purchase info in say 'sheet 1' - let's say 30 different headed columns and then many lines of different information under each column.
In 'sheet 2' I want to create an invoice template of my own design (I can do easily) for printing.
This template will need to extract say 10 bits of information from a particular row and then put them in a certain place on this sheet.
How can I type in one piece of information in a cell on sheet 2 (say the invoice or line number of the database) and that will then trigger all the other needed information from that particular line in sheet one onto this template?
I know it can be done but for life of me can not remember the formulas to use for these other cells in sheet 2 based on the info put in that one 'trigger' cell
Here's a sample data set. How can i perform a vlookup to populate my forecast columns and have it match BOTH the customer column and the SPFKey columns?
******** ******************** ************************************************************************>Microsoft Excel - Receiving Qtr1 2007.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutL20=
ABCDEFGHIJKL1Business*UnitCustomerSPF_KeyFORECASTACTUALS*2"NBPRO"Sold-to*PartySPF_KeyJanFebMarTtlJanFebMarTtlVariance3NBPROAAR*CORP.883***01*1224NBPROAAR*CORP.933***020**20205NBPROAAR*CORP.934***09**996NBPROAAR*CORP.999***02*1337NBPROAEROTHRUST*CORPORATION6600***01**118NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD918***0*11229NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD919***0*112210NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD933***042422210610611NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD934***042424112512512NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD1742***0*1*1113NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD1793***0*0*0014NBPROAIR*CHINA*IMPORT*&*EXPORT*CO.*LTD1795***01**1115NBPROAIR*INDIA933***036408215815816NBPROAIR*INDIA934***046176512812817NBPROAIR*INDIA1742***0**00018NBPROAIR*INDIA6601***0*1*1119NBPROAIR*INDIA6602***0*1*1120NBPROAIR*INDIA6603***0*0*00Sheet2*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am trying to compare items on two spreadsheet. I have an existing spreadsheet that lists items and then I import another spreadsheet from a database to confirm if new items have been added that were not on the original spreadsheet. I am about to go crazy and cannot figure out why I keep getting N/A (I know there are some repeats).
I have tried formatting, adding in isna, making sure there are no spaces, and paste special as text... still doesn't work. There are hypens in the data so I have removed them with substitute.
Sub Moveit2()
Dim Quantity As Range
Dim Cell As Range
Dim Cell2
Dim Breaks As Range
Set Quantity = Range("a2", "a21")
Set Breaks = Range("g1", "s1")
For Each Cell In Quantity
For Each Cell2 In Breaks
If Cell2 = Cell Then
Intersect(Cell2.EntireColumn, Cell.EntireRow) = Cell.Offset(0, 1)
End If
Next Cell2
Next Cell
End Sub
I have this macro to move things to the right. Sort of like a vlookup in a way. However, it runs using one range @ a time. For example it will look up the quantity in A2 versus what's in Row 1 and if they match, data from B2 would be moved into correct column. However, I'd like to run for multiple columns at the offset so I can don't have to keep changing data in the macro. Like want to run for these ranges at the same time as running the first range.
Set Quantity2 = Range("c2", "c21")..........
I am trying to develop a point system to rank things. For eg: in the below chart, I have the follow criteria.
In a particular Cell A1, i enter a numerical value like 1.5. Then Cell A2 (Points) should show that the Points earned is 80.
If MTTR is 1.00, then the Points received by the candidate is 100. Similarly if 3.5 or higher is there, then the points should be 0
MTTRPoints
1.00100
1.2590
1.5080
1.7570
2.0060
2.2550
2.5040
2.7530
3.0020
3.2510
3.500
This is only one type of calculation. For other tables, i will have to change the criteria.
Is there any way i can set the limits for A2 as 0 to 100 and based on what appears in A1, the cell A2 should change automatically
I have two spreadsheets, one gives me the beginning and end of civil twilight as a measure of day vs. night. The spreadsheet has Date/Time in the first column, and the value 45 in the 2nd column when it is night. The second spreadsheet has also 2 columns with date/time and body temperatures of a squirrel. I want to get basic statistics (mean and standard deviation) of the squirrel's nocturnal body temperature, that is for times when it is night (value 45). The tricky part is that Date/Time of both spreadsheets are different. The procedure has to recognize that the date/time of body temperature lies between the beginning and end of the value 45 blocks of the first spreadsheet.
files: twilight sheet squirrel temperature
I need formula to extract my data to date format...
see this below :
col.a
expected result
Jakarta, 21 Mei 2005
21 Mei 2005
Bangkok, 11 Agustus 1994
11 Agustus 1994
I'm just wondering how you would go about extracting a date from a filename and formatting it into a different format so you can . Find with it. The file names are always in the same format with the same prefix. So each file is something like ABCDEFGyyyymmdd.xls. I'm really lost on where I should start with this one
View 4 Replies View RelatedOften I need to add data from one spreadsheet to the appropriate places on another spreadsheet. For example:
Sheet A has 10,000 records with these fields: id#, name, address, place of employment.
Sheet B has 5,000 records these fields: id#, GPA, college major, type of degree.
Some of the records in B contain information for the same id#'s as sheet A. I want to add this information together so that a Sheet C will have these fields: id#, name, address, place of employment, GPA, college major, type of degree.
So I have this assignments. Its about rental services. I need to create a formula where the price is automatically found from a table depending on what drop down menus are selected. One menu is the rental name and the other is the season i.e. high or low, therefore each rental has two prices.
I know i can use Vlookup if there was one drop down menu but how to do the other. I was think it will interms of if statement but i dont know...
Here is the link to the worksheet: [URL] ...........
I have a column with the following values:
SubmitDate
November 8, 2012 1:37:07 PM GMT+05:30
November 8, 2012 9:32:03 AM GMT+05:30
November 8, 2012 4:32:54 AM GMT+05:30
November 7, 2012 10:28:11 PM GMT+05:30
November 7, 2012 8:36:43 PM GMT+05:30
November 7, 2012 6:33:13 AM GMT+05:30
[code]......
I need another column, with just the month specified there based on above dates, so that I can manipulate the complete sheet further using a pivot. Some formatting issue isn't allowing me to use month() function, to derive the month of the date mentioned in the cell.
Using Auto-filter is too tedious, since I'd have to do it 12 times to cover each of the month. Tried recording a macro, but that too isn't supporting much, since it gets specific to cells and hence isn't re-usable in another sheet with similar data.
How can I automate the task of extracting just the month from the above column?
I'm writing a bit of a code that will re-format all sheets in spreadsheet except the three named. I keep on getting compile errors whatever I do. It's driven me mad.
View 3 Replies View RelatedI have a userform with a spreadsheet in it and I am inserting data into a workbook(my data base) with this application. In the spreadsheet changing event I used "0.00" number format (this is what I need) but the results after I type a number is diferent from what I just typed. i.e: if I type 13.56 there is no problem but if i type 6.56 the number is transformed to 20607.00. I have tryed a lot of methods to stop doing that but all of them failed. how to use decimal number format without this problem
View 6 Replies View RelatedI need to extract all instances of words that have format xnnnnnn, where x is an alpha character (letter of alphabet, to be precise) and nnnnnn are numbers. The words could something like u435586. The problem is I do not know how many instances of these words are in the string. The entire string is contained in a cell. A sample string could be something like:
SMNTv922970;#1283;#SMNT 433925;#1284;#SQRS 003417;#1285;#SQRSp047683;#1286;#SMNT 6132451;#1287;#SQRSw3145627;#1288
and the end result should be
v922970 t433925 t003417 p047683 t6132451 w3145627
The words are preceded by the character "" which might facilitate the search.
I see that IF statements can only be nested 7 times. How do I create a cell that checks to see what item was selected in the dropdown box of 20 different choices and choose a particular cell range depending on what is chosen?
View 9 Replies View RelatedOpen a brand new spreadsheet whether the format is set to "General" or "Text" it will not let me enter numbers. For example, when I enter 2007 in the cell it displays 20 07 not really that big of space between the two zeros - but still a space. I can't format this no matter what I do.
View 1 Replies View RelatedI have a small spreadsheet setup for my job where i have to input the time on arrival in L3 which is linked to a NOW() formula. this is it (=IF(L3="",NOW()
View 9 Replies View RelatedIs there a way to format a column or range in a spreadsheet that would prevent other formats from being pasted from another spreadsheet?
Obscure question I know...i.e. column A should always be the same font, size, color, border and text format. I want to prevent the user from copying junk from another spreadsheet & pasting all into column A; similar to paste special > values.
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.