I have a range that contains 3 cells on top act as titles ie TYPE NUMBER and AMOUNT.
I need to extract a range from the original range where the TYPE changes.
eg
TYPE NUMBER AMOUNT
OSF 1002 10.23
OSF 1004 15.68
SA 1006 100.25
SA 1005 17.89
CW 1112 15.56
So for the above example I would need the 2 OSF entries and its corresponding NUMBER and AMOUNT to another location on the worksheet. The same for the other TYPEs. The number of entries for each TYPE varies so I will not in advance how many entries of each TYPE I will end up having.
How can I check to see if this range is sorted with vba?
I have searched but havent found anything for strings.
I can only think of adding each cell to an array, creating a copy array, sorting the copy array and then comparing the two arrays. I want it to return TRUE, FALSE or 1, 0
I've tried several ways and came close to the extract with the 2 formulas below. If there is a way to combine these 2 formulas, how to combine or any other function to complete the extract?
I have a problem for extracting dates of leave from the attendance. A sample WB is attached. In the attached WB, I want to extract date(s) on which leaves were taken.
I would like to know if it is possible to extract just the number of a row from a range. for instance range("c5") would give a row number of 3. Its probably simple but its evading my attmept to work it out.
Usually I use data connections (using http://www.....) to pull several worksheets(tables) from another spreadsheet. Currently I had a set of worksheets that created in an unstructured manner, the tables are not entered from Row 1 (see attached mockup). Besides using VBA programming, if there a simple way to connect and extract these tables to a fresh spreadsheet for computation. So the users can continue to perform data-entry and this consolidated spreadsheet will refresh whenever open for reporting and visualisation.
I have a an excel file which has 2 columns of data. 1st column indicates the date. 2nd column indicates the data associated with the date.
I would want to create a code that is able to extract the dates that is able to let user select the date range and its associated data and copy it into another worksheet. But it seems that my below code fails. Can anybody give me some advice?
For eg in the attachment file, the Raw Data worksheet contains all the infomation and i wish to copy all the data from 8thJuly07 to 30thJuly07 to another sheet named Edited Data.
Sub date_choice() Dim i As Integer, j As Integer Dim end_date_last_occurence As Integer, No_of_end_date_occurence As Integer Dim strt_date_1st_occurence_row(1 To 10000) As Variant Dim end_date_1st_occurence_row(1 To 10000) As Variant
Raw_data_last_row = Range("A" & Rows.Count).End(xlUp).Row 'Get the last row no
I have data of different accident year. Now I need to identify different Accident Year and use them in Macro to do certain things. For example in the file attached I am using them in Msgbox. Now to acheive that I first extracted unique values using advanced filter on Column C and later use the different value to POP up the Msgbox. (This is achieved). Now I want to skip this part of doing Advance filter to extract unique value. Is there a way I can know unique value of data through the code itself and use them in program. here is what I am doing currently: I have delted the most of the data cause I am concerned with coulumn containing acc_year only.
Sub test() Columns("A:A").AdvancedFilter Action:=xlFilterCopy, CopyToRange:= Range("C2" _ ), Unique:=True Range("C2").Select Range(Selection, Selection.End(xlDown)).Select Selection.Sort Key1:=Range("C3"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal Range("C3").Select Do While ActiveCell.Value <> "" MsgBox ("The Year is " & ActiveCell.Value) a = ActiveCell.Row Range("C" & a + 1).Select Loop End Sub
A1: The War of Art by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook A2: Do the Work by Steven Pressfield (Apr 20, 2011) - Kindle eBook A3: How to Get the Raise You Want in 90 Days or Less: A Step-by-step Plan for Making It Happen by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook (Note: This cell (A3) have "by" 2 times)
I want to extract text from RIGHT till the word "by"
So the result must be: B1: by Steven Pressfield and Shawn Coyne (Nov 11, 2011) - Kindle eBook B2: by Steven Pressfield (Apr 20, 2011) - Kindle eBook B3: by Kathy M. Barnes and Robyn Feldberg (Jan 30, 2009) - Kindle eBook
There are multiple duplicates of different part numbers in a column. When I autofilter the column, it shows 1 selection for each part number. I am trying to extract this selection fromm the autofilter dropdown box. I want to use it elsewhere in a dropdown box.
I have a long string that has a list of digits in the middle that I want to extract. The string is variable length and the number of digits I want to extract is 5-7. I also have slashes in between the numbers I want to extract. I need a UDF that allows me to extract the 5-7 digit number from the string and restrict around the slashes (i.e. if two sets of digits in the string match the condition for extraction, extract the one around the slashes.) For example my original data is like
Hardware (somethingsmall) otherinfo Hardware ( somethingdisplaced) Blackbox item (somethingelse) other info Service(aservice)
etc
I need to extract the data within the brackets allowing for additional spaces for use in a second query which will search for each individual line item in turn.
For some reason the query does not like searching for the raw data in it's current format so I'm trying to extract the key information for searching instead.
I can do it in excel by:
(Assuming data is in cell V36)
'in colum x =FIND("(",V36)
'in column y =FIND(")",V36)
'in column z =MID(V36,X36+1,Y36-(X36+2))
in column aa =IF(LEFT(Z36,1)=" ", MID(Z36,2,20),Z36)
I have tried doing this cleverly in VBA and failed and then ended up trying to enter this code in the cells within the VBA code and do it that way but I'm having difficulty in doing this also.
I have the following issue. I have a list of strings. Each string contains certain characters that are exactly the same for all strings, some characters are different making the string longer (in some cases). What I need to do is extract some combination of characters from each string. The strings look like this:
AB & CDE & FG & I mmmm yyyy.HIJK AB & CDE & FG & II mmmm yyyy.HIJK
The part "AB & CDE & FG & " (incl. spaces) is the same for each string. The next part contains a roman count from I to VII, causing the length of each string to vary. The "mmmm" part contains the current month spelled in full e.g. December. This part differs as well, for each string. The "yyyy" part contains the year in four digits, e.g. 2007. The part after the dot is the same for each string again.
What I need to do: - is to extract the month and assign it to a new string - extract the year and assign it to a new string - extract the roman number, translate it to a normal number (II -> 2) and assign to a string (or integer).
I am trying to categorize a list of words based on the first letter.
For example:
[Code] ......
I want to see if the letter 'D' in 'Data' occurs in a range from A-G, if so display "A-G" in cell B, else if the first letter occurs from H-M, display H-N in cell B else if the first letter occurs from N-R, display N-R in cell B else display S-Z in cell B.
I am trying to extract the number of times a name appears on a certain range of cells on a worksheet, now I can get this to work, but I am sure there is a better way I just cant get it to work!
I jst need to console data from different workbooks to one worksheet. There are 30 workbooks & each workbook contains one worksheet name as Data. The work i am currently doing mentioned below step wise
1) Open workbook 2) Apply filter on whole data 3) Select dates from "J" Column (E.g 02/10/2014 to 02/20/2014) 4) Then Copy whole filtered data 5)Paste into New workbook 6) Open another worbook 7) repeate Step # 2,3 8)Then paste whole data in below the first data New Workbook (In which we have paste the first data below that i will paste this data)
These steps i have to do manually it takes almost 1hr daily After pasting all 30 workbooks data in one workbook i have to make pivot of it & sent it to my Manager. What i need
I jst want a excel macro that will ask me date range from which i have to pull data from all 30 workbooks.
Once i gave date range will jst click on button say extract or pull. It willl console whole 30 workbooks data from the given date range in a one worksheet.
Hi, I'm very new to writing Excel Macro's and wanted to know if I could do the following. Conceptually, I understand what I need done and think it should be fairly straightforward.
There's 2 main events in this loop (I hope that's the correct terminology):
Input 1) User defines the beginning cell to start the loop. In this case, A2.
Input 2) User defines the range of columns/rows to display. The formula for rows that I've thought of is 4r. So if a user wants 20 rows below cells A2, they simply input 5 for r. The number of columns is a constant 5. So if r=5, then I'd want the range to be A2:E22......
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B Expiry Date________Redeemed by 15/08/2014 15/02/2014 15/08/2014________John 15/02/2010________Marc 15/02/2011________Bob
