Fill Column Based On Column In Another Workbook
Aug 20, 2009
I am looking for a macro that will fill the column C by looking at column A at another workbook.
For example:
Full workbook:
A(column that will look) B C
blala blabla Blabla
Workbook missing entries in C row:
A B C
blabla blabla Null
So the workbook that missing entries in Column C,will look for it,by looking at
at column A,wich is the same at full workbook.
Here the workbook wich the values will be taken at Column A, named as archive
And the the workbook (named 900066_027_2373.xls)wich the column C will be filled,by looking at column A.Then find that code in the "archive.xls".See what has in it's A cell.Copy it.Paste it in current cell.
Attached Files
View 9 Replies
ADVERTISEMENT
Apr 21, 2014
I have a worksheet with Coulmn A and B , wherein , Column A has a list of values that can be duplicated. Based on the values in Column A, I want to fill corresponding cells in Column B. see the attached.
way to accomplish the same. Tried VLOOKUP.
View 1 Replies
View Related
Apr 19, 2007
I have a list that is streets and addresses. All contained in column A. Cell A1 is the street name and then Column A3 is the street number. This repeats down column A for almost 1000 street names. I need to fill column B3 with the street name, as well as B4, B5, B6, etc until the street name changes. I was trying to do this with an if..then but couldn't get it to work. I also tried to work on a do.. loop looking for the change from a string to number. But my programming is a little rusty. If anyone can help I was be forever grateful. I mean the alternative is to sit here and copy and paste all day.
ABBEY CT
1700
1700
1703
1703
ABERDEEN LN
1305
1313
1321
1321
View 4 Replies
View Related
Jul 10, 2007
I need to fill in one column (a county code) based off of the contents of another column (the State). Something that would generally be easily solved through a VLookup. However I want the macro I write to be usable in other workbooks where the columns may not appear in the same order or with the same spacing (slightly different names may be possible too but we'll look over this for now). I have the columns named by their heading, but then I need the macro to go down the two rows, filling in 998 in the county code column, if the state is not OH.
Dim x As Integer
Dim STcode As Range
Dim CnTcode As Range
For x = 0 To ActiveSheet.UsedRange.Rows.Count
If STcode.Cells(x, "State").Value <> "OH" Then
CnTcode.Cells(x, "County_Code").Value = "998"
End If
Next x
I know that there is a problem in the logic because "State" and "County Code" are ranges, so excel doesn't like me referencing them as columns.
View 9 Replies
View Related
Feb 1, 2010
Is there some easy way to fill out column B referencing column A, but only incrementing by 1 row in A every 2 cells in B?
Example:
Column A:
A1 = 1
A2 = 2
A3 = 3
etc...
Column B (I would like to fill this, referencing column A):
B1 = A1
B2 empty
B3 = A2
B4 empty
B5 = A3
etc
View 4 Replies
View Related
Aug 13, 2014
IF I enter 01-09 in B10 or B11 or B12 want autofill FIRST in C10, C11, C12
11-19 in B10 or B11 or B12 want autofill SECOND in C10, C11, C12
20-29 in B10 or B11 or B12 want autofill THIRD in C10, C11, C12
HOW TO DO THIS ?
View 7 Replies
View Related
Nov 9, 2009
I have 2 columns, the second column has some empty cells in the end of the column
What I would like to do is to fill in those empty cells but only as many as the filled-in cells in the first column
(I have already tried the specialcells(xlCellTypeBlanks) but that did not work as the empty cells are not always "blank" as well)
View 10 Replies
View Related
May 9, 2009
I'm working on making a spreadsheet that allows me to select an item type from a dropdown list (through validation) and then would copy in a range of values from another worksheet based on my dropdown selection.
The set-up: I am primarily concerned with two sheets in my workbook, BiS and Weights. I have a database of items and their associated values listed in Weights. I have already managed to get dropdown lists of my specific item types using named lists and have put that in the BiS worksheet.
What I would like to do is have the values in the Weights worksheet copied over in the same order and number of cells based on what item I select from the dropdown list.
View 6 Replies
View Related
Feb 15, 2010
In the attached workbook I'm trying to populate Column E with sequential numbers (as shown) based upon a changing range (defined as a named range called 'range'). Is it possible to write a formula in the cells in Column E that will do this?
View 2 Replies
View Related
Jun 22, 2006
I am attempting to write an Excel Macro that would allow me to Click on a particular row and have the fields in my form fill with the data in the columns of the row.
I am fairly new to Macros and VBA, but know that this has got to be a possibility.
View 9 Replies
View Related
Jun 24, 2009
I would like to automatically color fill a series of rows based on like information from a single column. When the information in the column changes then the rows would either stop filling (this would be best) or fill with a different color until the information changes again.
Summary: series of alternating rows would either be filled or unfilled based on changes from the column information.
Hope this isn't too confusing. Below is an example except I would want the cells filled, not the text or numbers to change. The highlight is changing based on the changing of the numbers.
ABCD 12345
ABD 12345
ABCD 12349
ABDF 12349
ABCD 12358
ABF 12358
View 9 Replies
View Related
Jul 13, 2014
When I hide columns in a column chart the different fill colors I used on specific columns no longer show up with the colors I originally had. Is there a way to maintain the proper sequence of column fill colors even when some columns are hidden?
View 1 Replies
View Related
Oct 18, 2009
I have 4 columns
Column A is "Customer Number"
Column B is "Date Can Opened"
Column C is "Month" (currently blank except header row)
Column D is "Year" (currently blank except header row)
I would like a macro to do 2 things here....
1. Extract the Month part of the "Date Can Opened" column and put it in column C.
2. Extract the Year part of the "Date Can Opened" column and put it in column D.
Currently, the "Date Can Opened" column is formatted as a date like */14/01 taken from the Number tab in the Format Cells dialog box) ...
View 9 Replies
View Related
Nov 23, 2012
I am after a macro to insert a column lets say between column A and B. Once column inserted new column B should be filled by a text say "January" but it should be only filled upto the data of column A so if column A has data upto A600 then column B should be filled from B1 to B600.
I tried recording but it fills data upto B65000+.
View 2 Replies
View Related
Jun 18, 2009
I am trying to have some automation to my WS and what I want to do, is if a certain column (column 104) is changed, it will fill out that column with the data entered as long as the account is the same (column 5). Here is the code I tried, but realized very quickly, it puts me into a loop. This is being called by a change worksheet fuction
If Target.Column = 104 Then
If IsEmpty(Target) Then
Else
testacct = Cells(Target.Row, 5)
temptest = testacct
s_TempSwitch = Target.Value
Testoffset = 0
Do While temptest = testacct
temptest = Cells(Target.Row + Testoffset, 5)
Cells(Target.Row + Testoffset, 104).Value = s_TempSwitch
Testoffset = Testoffset + 1
Loop
End If
End If
View 3 Replies
View Related
Jan 23, 2008
I was going through a thread that is open now about a similar subject: Create Workbooks & Worksheets For Each Group In Table. I tried getting it to work myself but was unsuccessful. I want a code that will create a new workbook for every new Vendor. I tried doing it myself but was getting compile errors... If this is not what I should be using let me know, it works the way I want with just worksheets, i thought it would be an easy conversion to workbooks
Sub PagesByDescription()
Dim rRange As Range, rCell As Range
Dim wSheet As Worksheet
Dim wSheetStart As Worksheet
Dim strText As String
Set wSheetStart = ActiveSheet
wSheetStart.AutoFilterMode = False
'Set a range variable to the correct item column
Set rRange = Range("A1", Range("A65536").End(xlUp))
'Delete any sheet called "UniqueList"
'Turn off run time errors & delete alert
On Error Resume Next
Application.DisplayAlerts = False
Worksheets("UniqueList").Delete
'Add a sheet called "UniqueList"
Worksheets.Add().Name = "UniqueList".....................
View 3 Replies
View Related
Apr 21, 2014
Copy rows from one Sheet to another based on a separate cell value But specifically, I am trying to copy row values from Columns C through column Z in Worksheet 1 of file POHeader.xlsx to row values Columns N through AK in file POReceiv.xlsx when the (Purchase Order #) values in Column A of each file match.
The reason is behind this is - one file has the unique Purchase Order number as the key without associated parts and the other file has the associated part number as the key with purchase order number attached.
I don't know whether I need to use VBA or if I can just use an index and match function.
View 9 Replies
View Related
Jul 7, 2009
I'm using excel 2003. I would like to select and copy rows of data within a worksheet of a workbook and then paste those rows into a newly created excel workbook. That is the easy part. The complication is that I would like the macro to select the rows based on a particular string value that will be impossible to specify in a fixed way (i.e., it will change from project to project). Let's say the variable that distinguishes the rows is location, so some are from Tokyo, some New York, and some from Paris. Using vba, how can one 'splice' the data into (in this case, three) seperate workbooks based on the string/values of another variable?
I am familiar with auto-filter, but in this case, I really do need to create seperate workbooks, rather than apply calculations to a selection of the data.
View 9 Replies
View Related
May 27, 2014
There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
View 3 Replies
View Related
Mar 25, 2008
my existing macro, as the run takes to much time to complete. (at least 20min) I've already tried several loops, but no one worked for me. Following situation: There are two excel files, entries in column 73 - 85 will be copied from WorkbookRust to the other workbook if the numer in column 5 is the same. Not every cell within this columns contains data, so the macro should automatically jump to the last entry in each of the above mentioned columns, instead of predefine the range as you see in the code below. After the data is copied to the other workbook, it will be filtered acc. to Sub FilterMain and then copied back to WorkbookRust. As already said, the whole thing works, just to lame.
Sub Allmacros()
Dim WorkbookRust As String
WorkbookRust = ActiveWorkbook.Name
ChDir "C:Documents and Settings vogtMy DocumentsRüstplausch"
Workbooks.Open Filename:= _
"C:Documents and Settings vogtMy DocumentsRüstplauschCH_Revenue_2008.xls"
Sheets("Main_Overview").Select
Windows(WorkbookRust).Activate
Application.run ActiveWorkbook.Name & "!UpdateEntries"
Application.run ActiveWorkbook.Name & "!FilterMain"
'not ask to overwrite existing file
Application.DisplayAlerts = False
Workbooks("CH_Revenue_2008.xls").Save
Workbooks("CH_Revenue_2008.xls").Close
End Sub
Sub UpdateEntries()......................
View 7 Replies
View Related
Oct 5, 2011
I have a workbook that has a sheet called CustInvData, this sheet contains 4,421 rows of invoice transaction data for 178 customers starting on row 2 (headers on row 1). I need to split the transaction data for each customer out into a workbook template based on the customer name in column A. I need each workbook named by the customer name along with a month and year (example: Bellsouth-0911.xls), this should create 178 unique workbooks. And since we sometimes have to go back and rerun invoices for previous months, I'll need to control the month and year manually in the code.
The parsed data needs to be copied to a pre-formatted invoice template. This template has 2 sheets, Sheet1 is called 'Product Summary', this is a table that uses VLOOKUP functions to read the data in Sheet2 called 'Product Details', this is the sheet the parsed data needs to be copied to for each customer invoice. The 'Product Details' sheet has formatted rows 1 thru 11, row 11 being the header row for the data from CustInvData to be copied. So the parsed data needs to start at row 12.
Last, once the data has been copied into the 'Product Details' sheet, I need the data to be SubTotaled at each change in column J (Product) and use the 'Sum' function to add a Subtotal in column L (Retail Price) for each unique product category.
Example data below, I've simplified it (the actual data array spans from columns A to Y)
Customer NameProduct Retail Price
ABC CompanyAVMPCR10
ABC CompanyAVMPCA15
[Code]....
I'm a bit of a novice with macros, but I know Excel pretty well.
Using Excel 2007 running on Windows Vista
View 2 Replies
View Related
Mar 12, 2008
I have two excel files.
File #1 is a varying length and has 4 columns with ID #s in Column A.
File #2 is a two column file that contains a list of ID #s in column A AND modified ID#s in column B.
I need to match the ID #s in column A from file# 1 to the list in column A of file#2 then replace ALL instances of the matching ID #s in column A of file#1, with the values found in column B of file #2.
I've tried using the substitute function but I could only replace one found ID at a time.
View 9 Replies
View Related
Jan 5, 2008
(The attached workbook will provide a more obvious explanation.)
I am building a 'reporting' workbook. It has 3 tabs.
i. the first I will use for buttons to call macros (no help needed)
ii. the second tab is 'REPORT' - where data from the third tab ('DATA') will be collected/organized -based on a textual value in column D - before being exported into a seperate workbook (finalized report).
iii. third tab is 'DATA' - this sheet will contain all the data that will provide info for reports
Presently, the 'REPORT' tab has been manually filled in with data from 'DATA' tab - I did this thinking it would provide better explanation here; take note that values in column D will be gathered via vlookup to other worksheets not included her.
Here is what I want to do:
1. goto 'DATA' tab, find the first PLATFORM (column D) text value
2. goto 'REPORT' tab, put that text value in B2
3. go back to 'DATA' and in each row that the same PLATFORM is present, copy over the corresponding info to the appropriate cell in 'REPORT' tab
4. once I've collected all the rows for one PLATFORM - export and save the 'REPORT' worksheet to a seperate workbook in 'C:REPORTS' and close
5. clear the range where data is being written in 'REPORT' tab ("A5:H60000"), then go back to 'DATA' and get the next PLATFORM (column D) text value - enter it into B2.
6. fill the range ("A5:H60000") with the corresponding values from 'DATA' based on the new PLATFORM name...
View 3 Replies
View Related
Oct 7, 2009
I need to fill in the third column on sheet 2 from the 3rd column in sheet 1. do I need an IF statement combined with vlookup??
sheet 1
mark l XYZ l 45
katy l ABC l 3
mark l ABC l 6
katy l XYZ l 45
mark l DEFl 4
sheet 2:
mark l XYZ l
katy l ABC l
mark l ABC l
katy l XYZ l
mark l DEF l
View 4 Replies
View Related
Mar 13, 2009
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
View 2 Replies
View Related
Jun 6, 2014
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
View 6 Replies
View Related
Dec 11, 2013
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
View 1 Replies
View Related
Jun 1, 2009
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select
SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")
For i = 1 To 8
SimpleMethod = SimpleMethodRng(i, 1).........
View 3 Replies
View Related
Oct 2, 2008
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
View 2 Replies
View Related
Nov 27, 2011
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
View 2 Replies
View Related
