When I enter barcode X in cell A1, I want B1 to say supplier and C1 to say product name and D1 to say package quantaty etc.
And if I enter barcode Y in cell A2, I want B2 to say different supplier, and so on, hopefully you get the picture.
I have three cells where a user will input data, in some cases (2T Weld Condition) they will only enter in B12 and C12, but in the case of a 3T weld they will also enter data in the D12 cell. I then use a formula to check for the thinnest material and that is entered into another cell with a formula, B14. I then need to check the value in B14 to verify if it is above zero, but below 0.65 (mm). If it is then I would like to have a message appear on the screen notifying the user that they are outside the acceptable range.
I cannot figure out how to use the information in cell B14 because it is a formula and my code only works with a direct value. The code I am using works if I point to one of the three input cells, B12, C12 or D12. How do I use the information in B14 to work with the code below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$12" Then
If Target.Value < 0.65 Then
Run "MyMacro"
End If
End If
End Sub
MyMacro loads a userform with buttons, etc.
I have a worksheet ("ALL JOBS") with huge row data and the row data will vary every day. My problem is there will be a lot of blank cells which I need to fill manually and its tacking lot of time of mine.
Code to fill these blank cells automatically with some specific texts based on the attached conditions.
I have attached the workbook for more details. FillCellsTest.xlsm
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
I realised that the screenshot attachment makes much more sense than trying to show within post.
EXPENSE MONTHLY ANNUALLY MONTHLY COST ANNUAL COST
BILL £4.00 £4.00 £48.00
BILL £120.00 £10.00 £120.00
BILL £260.00 £21.67 £260.00
BILL £12.00 £12.00 £144.00
BILL £19.00 £19.00 £228.00
BILL £14.63 £14.63 £175.56
BILL £550.00 £45.83 £550.00
BILL £94.00 £94.00 £1,128.00
For my bills I want to work out first the monthly cost e.g. monthly(B) figure OR annual (C) /12 - and give the result in column (D)
And then work out the annual cost e.g. monthly (B) *12 OR annual figure - and give the result in column (E)
So if there is no figure in the monthly column (B), the calculation will be dividing the annual column figure by 12 and vice versa, if there is no figure in the annual column (C) then the calculation will be multiplying the figure by 12
This is probably a very simple calculation to do, but I am struggling to make sense of calculating results from different columns to give a result in the same cell.
SCREENSHOT.docx
I would like to gray out or hide contents of a series or group of cells when a particular cell has a certain result. i.e. if cell A1 is <5 I want cell rows 5 thru 10 to be hidden or grayed out.
View 5 Replies View Relatedrefer to attached worksheet. If value in D7 is less than zero; then D8 = 0%
If D7 > 0, then D8 = value in C8, and this value must also be copied into 9 adjacent cells in row 8 from D8 onwards.
I need an economical way to fill values in 12 cells.
I have a list of 50 cities in column A. For each city I need find and fill certain demographical values in columns, L2 through W50, consistent by looking up data in another sheet. Both sheets share the same column names.
I have tried =VLOOKUP(A2,'CitiesDemo'!$A$1:$W$51,11,FALSE) and it works well enough but I would like to drag across and down to avoid manually editing references.
I am looking for a way for Excel to fill in cells in a column that has data sporadically in it. I am importing a text file into excel and saving it as an Excel file.
In the example attached, I need the numbers filled in all the way down to the next number. I don't care about the text, just the numbers. I realize I can copy and paste, but these files can be several hundred rows long and it seems there should be a better way.
I want to highlight the cell of Column 'A' of excel only when it does not contain the text like "Verify", "Validate" or "Evaluate" in its content if, the value in corresponding cell of Column 'B' holds the value 'Y'. Secondly, the column 'A' can't contains the words like 'Verify', 'Validate' and 'Evaluate' if the corresponding cell in Column 'B' holds value 'N'. So just need to highlight those discrepancies if its there.
Column A
Column B
Expected Action
Press F3
N
Its Fine
Verify this..
Y
Its Fine
this....
Y
Need to Highlight Cell of Column A as Value in Column B is Y but the column A does not contain any value like "Verify", Validate" or "Evaluate"
Verify This.
N
Need to Highlight Cell of Column B as the Value of Column A contains words like "verify", "validate", "evaluate" but corresponding cell value in column B does not hold value "Y".
Suppose in cell A1 I type in the number "100" and in A2 I type in the number "5"
What I want to do: Have the number "100" repeat 5 times in a vertical list (so 100 appears in B1, B2, B3, B4, B5)
I'm stuck using Excel 2003 to auto-populate a cell.
I have a range of dates in five consecutive columns called:
Phase 1, Phase 2, Phase 3, Phase 4 and Phase 5
I enter the date that 'Phase 1' starts under the first header. Once Phase 2 starts I enter a date under 'Phase 2', and so on to Phase 5.
Each phase is consecutive to the next so will always be filled in from 1 to 5.
I want to create an additional column called 'Status' that shows the Column Title of the last phase with a date in it. For example, if Phase 1 to 3 had dates but 4 & 5 were blank, "Phase 3" would be displayed in the 'Status' column.
I've tried nesting some ISBLANK functions without any luck.
I need to fill 2 other cells with varying colours dependant on what is chosen within another cell.
I have a drop-down list in cell A2 to select either ON SITE, ACTIVE or CANCEL.
What I need then basically is...
if A2 equals 'ON SITE' then fill other two cells (A3 and B1) GREEN
if A2 equals 'ACTIVE' then fill other two cells (A3 and B1) YELLOW
if A2 equals 'CANCEL' then fill other two cells (A3 and B1) RED
[File attached]
I have a calendar set up with dates going along P6:CU6. Column C9:C27 has various status' for the job such as "Complete" or "In Progress" etc. Next to that in rows D and E I have start and end dates for the job. What I am trying to do is change the fill colour of the empty cells that are in line with each job, so that between the correct dates they are the corresponding colour to the status. So a complete job on row 9 that started on 26/05/14 and finished on 28/05/14 would have three green cells along Q9, R9, and S9.
I have tried an IF/AND/OR statement which looks like this:
=IF(AND(Q6>=D9,Q6<=E9),OR(IF(C9="Planned","P",""),IF(C9="In Progress","IP",""),IF(C9="Late","L",""),IF(C9="Complete","C","")),"")
I am getting a #VALUE! data type error, I have tried reformatting the cells to various date formats but no luck so far. This could be because my dates are set up as =P6+1 etc. but I am not sure. The error only occurs when the cell falls within the dates, otherwise it remains blank.
I intend to hide the value in the cell and use conditional formatting to change the cell colour based on the hidden input.
Once this is working I also need to take weekends into account, column G has any 2 value combination of Y and N to say whether the employee is working Saturday, Sunday or both. Row 7 has a "1" value underneath every Saturday and a "2" underneath every Sunday. I can imagine how this would work but combining it with the above formula could be complicated.
I've got a matrix combining actions on the left hand side (Col A) and owners on Cols B to F. I have drop down list for each action/owner combo: N/A, OK, KO, TBD.
Owner #1
Owner #2
Owner #3
Owner #4
Owner #5
Results
Action #1
OK
TBD
N/A
N/A
N/A
OK
[code]....
I would like to create a formula in Col G that does the following:If any of the values in columns B to F equals OK, then OKIf any of the values in columns B to F equals KO, then KO I've been tinkering with multiple IFs and quite rightly got bogged down as too many criteria to take into account...
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
I have been trying this for hours but to no avail.
I have a table with 4 columns headers
Name, Amount, Loc and Code
The name may look like ABC 1, ABC 2....
The Loc may be in US, GB...
and the Code may be AA, BB
I need to return a result "Y" if the sum of the amount is > 100
and "N" if the sum of the amount < 100 based on the conditions
of the following :if
1) Name is the same entity, such as ABC 1 and ABC 2 and
2) Loc is the same, US..and
3) Code is the same
I have attached a sample to illustrates the result
How to formulate results of students in excel sheet.
From the attached picture (capture1.jpg) of the excel sheet - The rules of exams are:
1. if candidate scores 50% in all 4 papers, PASS and proceed to next year
2. if candidate scores 50% in 2 or 3 papers + borderline fail in 1 or 2 papers, VIVA VOCE exam for the borderline failed paper (Definition of borderline fail is candidate scoring 45 to 50 marks)
3. if candidate scores 50% in upto 2 papers + borderline fail in more than 2 papers, RE-EXAM
4. if candidate scores 45% in 2 or more papers, FAIL and repeat the year
The rules are in the attached picture flowchart.jpg
I am unsuccessful in writing a formula for such multiple criteria...
I am using this formula but I don't know how to get it to populate more than one cell.
Here is the formula:
=INDEX(APPROVED!$A$3:$A$1000,MATCH($F$4&$H$1,APPROVED!$D$3:$D$1000&APPROVED!$C$3:$C$1000,0))
It has multiple matches but I can only see the first match in the cell.
I would like to fill in a table based on a small database
this table then creates a graph.
But I need to look at 3 criteria before I can fill in the table
namely: customer - weeknumber - weekday
based on these items the time should be filled in accordingly.
Can this be done with regular formula or should I try VBA ?
please have a look at my file the data should go from sheet input to sheet ACL
based on the above mentioned criteria
I have a cell with the following formula: =IF(ISERROR(AVERAGE(A2,C2,D2)),"",(AVERAGE(A2,C2,D2)). I'm using this formula because I want to average the selected cells, but if A2,C2, or D2 are blank I don't want it to return the # DIV/0! error, hence the "ISERROR" part.
Now... I want to conditionally format the cell with the above formula in it so that if it is equal to or greater than 80% it's green. Here's the problem, the conditional format colors the cell green if it is blank too. How do I stop that?
Below is an attached spreadsheet to show what I'm trying to do.
how can I automatically fill cells with certain colors based on the value of the cell. (i.e. I want to search an entire workbook and fill cells with values between 80 and 99 green, 60 to 79 yellow and 0 to 59 red.)
View 9 Replies View RelatedI am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.
I need to look at 2 different cells and have a 3rd cell provide a number based on the first two cells.
Column A: either 1 or 2 (2 results in +5)
Column B: either yes or no (yes results in a +5)
Column C: function would result in either 0, 5, or 10.
Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies View RelatedThe following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
I just stumbled onto this forum while Googling around, and it looks great. I'm pretty new to VBA coding so please bear with me. Effectively what I'm looking to do in this mock-up file, is anywhere the currency is "EUR" in column A, I'd like the relative cell in Column G to change to "INSERT TEXT", else I want it to untouched (i.e. to keep the comment it currently has).
View 6 Replies View RelatedI need to be able to fill a cell in the same row based on values in two other cells in different columns.
Current Layout. Call these columns A, B, and C
I have 3 different states I work with, OH, IL and PA. There are different tax exemptions based on whether or not the class is RES or COM.
Conditions:
State = PA, Class = RES, Tax Exempt = 1
State = PA, Class = COM, Tax Exempt = Null (not "0")
For all other states, Tax Exempt will always = 1
I need the VBA code that will autofill column B with the proper Tax Exempt status based upon columns A and C.
The code I have now just looks at the first value in columns A and C then fills all of column B with that number.
I want the 'Model Number' to automatically be picked based on the numbers entered into Sheet1 B1 & B2. The model numbers are listed on Sheet2.
View 4 Replies View Related